Installation

Introduction

Congratulations on the purchase of the new M1 ViNL player. This unit will give top quality performance when used as a top quality record player delivering the best performance possible from vinyl recordings.

Cleaning

Before cleaning the unit, switch off power at the mains switch and remove the mains plug from the wall socket. Clean the cabinet and remote control unit using a moist cloth. Using solvents, white spirit or thinners is not advised, as they could damage the surface finish.

Installation

Position the M1 ViNL on a stable, horizontal surface where there is no risk of it being knocked, or subjected to vibration such as from loudspeakers.

Important note:

The M1 VINL must be protected from humidity – if the unit is moved from a cold place to a warm room, leave the unit for an hour or so to allow sufficient time for the moisture to evaporate.

Please note: Musical Fidelity currently do not make any interconnecting cables, nor do we endorse any particular manufacturer’s cables. If required, please refer to the Musical Fidelity dealer who can advise on suitable quality cables for any particular setup.

Power Connections

The M1 ViNL is supplied with a standard IEC mains cable which plugs into the IEC socket at the back of the unit. The unit features a universal power supply that can work anywhere in the world without reconfiguring.

Audio Connections

MMinputs: Connect left and right outputs from turntable/moving magnet cartridge to left and right MM input on M1 ViNL. Use good quality fully shielded and connected (signal and ground) cables for optimum signal transfer and minimum hum.

MC inputs: Connect left and right outputs from turntable/moving coil cartridge to left and right MC input on M1 ViNL. Use good quality fully shielded and connected (signal and ground) cables for optimum signal transfer and minimum hum. If connecting a high output MC cartridge to the MC input results in a excessively high sound output, it is perfectly in order to move it to the MM input and re-select input and loading options accordingly.

Make sure that the cartridge/turntable outputs are connected to the correct INPUTs for MM or MC. High output MC cartridges are catered for in both MM and MC input options.

RCA Outputs: Connect left and right outputs to left and right line input on pre- or integrated amplifier. Use good quality fully shielded and connected (signal and ground) coaxial cables for optimum signal transfer.

XLR (balanced) outputs: Connect left and right XLR outputs to left and right XLR line input on pre- or integrated amplifier. Use good quality fully shielded and connected (signal and ground) XLR cables for optimum signal transfer.

Trigger Connections

Trigger input: Connect system triggering device output to this socket. Use good quality 3.5mm mono jack cable. Unit accepts 4.5V-15V DC triggering, either polarity.

Trigger output: Connect further devices in the system to be triggered into this socket. Use good quality 3.5mm mono jack cable. Unit passes on +12V DC at up to 60mA, for further devices.

Earth Connection

The green earthing post should only be connected when excessive hum is experienced. Connect the turntable earthing lead to this post if hum is noticed. If hum worsens when this post thus

connected, then disconnect immediately and investigate the cause elsewhere.

Note: some systems may have more than one direct earth point(s) already involved. This could cause hum problems that may only become apparent on connecting in this unit. Thus the M1 ViNL may not be the root cause of hum detected in a system.

There is no harm done if no connection is made to this terminal, as it is not always needed anyway, for example, some turntables have their own earthing arrangement.

M1 ViNL manual issue 2.doc2

Page 6 of 12

M1 VINL specifications

The Musical Fidelity M1 VINL is an exceptional phono preamplifier designed for audiophiles seeking high-quality analog performance. This compact yet powerful unit brings out the best in vinyl playback, integrating advanced technology to ensure that every nuance of the music is captured and reproduced with fidelity.

One of the standout features of the M1 VINL is its ability to handle both Moving Magnet (MM) and Moving Coil (MC) cartridges. This versatility makes it a perfect choice for vinyl enthusiasts who use various turntables and cartridge types. The device is equipped with a unique, switchable gain setting, allowing users to optimize performance based on the cartridge in use. Whether you are using a lower output MC cartridge or a standard MM cartridge, the M1 VINL can adapt seamlessly to provide the right level of amplification.

The M1 VINL employs high-quality components to enhance audio fidelity. Its precision engineering ensures low noise and a wide dynamic range, allowing for a truly immersive listening experience. The preamplifier features a fully discrete design, which mitigates noise and distortion, thereby preserving the integrity of the music signal. With a frequency response that extends beyond the typical range of human hearing, the M1 VINL excels at reproducing the richness and subtleties of vinyl recordings.

Another notable aspect of the M1 VINL is its dedicated power supply. It utilizes a robust power filter that reduces interference and ensures a stable performance, which is essential for maintaining the clarity of sound. The build quality is impressive, with a solid chassis that minimizes resonance and external vibrations, further enhancing audio performance.

Connectivity is made easy with RCA inputs and outputs, making integration into existing audio systems straightforward. The M1 VINL's design also includes a rear-facing grounding terminal to eliminate hum and noise, delivering a clean signal with every playback.

In summary, the Musical Fidelity M1 VINL is a versatile and technologically advanced phono preamplifier that caters to vinyl lovers. Its ability to support both MM and MC cartridges, combined with high-quality components and meticulous design, makes it a top choice for those serious about their vinyl listening experience. With the M1 VINL, users can expect enriched sound, dynamic performance, and the authentic warmth that only vinyl can provide.