White Outdoor 430 manual Making Adjustments, Replacing Rear Flap, Adjusting Handle Height

Page 14

Replacing Rear Flap

•To remove rear flap, cut off the flat end of the wire rod which secures it to the deck. See Figure 14 .

•Attach the new flap and new rod to deck, bending the ends of the new rod over to secure to deck.

 

Rear Discharge

 

Handle

Door

 

 

 

Bracket

 

 

 

 

 

 

 

d

 

 

 

 

o

 

 

 

 

R

 

 

 

e

 

 

r

 

 

 

i

 

 

 

 

W

 

 

 

 

 

 

 

Handle

 

 

 

Rear Flap

Bracket

 

 

 

 

Figure 14

SECTION 8: MAKING ADJUSTMENTS

Adjusting Handle Height

Your mower is shipped with the handle in the higher height position. To lower height, proceed as follows:

•Remove the starter rope from the rope guide.

•Remove the upper handle by removing the hand knobs and carriage bolts. Lay upper handle out of the way, being careful not to bend or kink cables.

•Remove the hairpin clips from the weld pins on the handle brackets. Refer to Figure 3 .

•Remove the carriage bolts and wing nuts from the handle brackets. Press out on the legs of the lower handle. Remove lower handle from the mower.

•Turn the lower handle around so the notch on

the bottom of the lower

 

 

handle is facing forward

 

 

as shown in the box

 

 

here. Reassemble,

Lower

Notch

placing the bottom

 

 

holes in the handle over Handle

 

the weld pins in the

 

 

handle mounting

 

 

bracket.

 

 

•Reassemble the upper handle to the lower handle.

•Insert hairpin clips in the inner holes of the weld pins and replace the carriage bolts and wing nuts on the handle brackets. Attach the starter rope as instructed in the “Assembling Your Lawn Mower” section.

Adjusting Cutting Height

IMPORTANT: All wheels must be placed in the same relative position. For rough or uneven lawns, move the height adjustment lever to a higher position. This will help stop scalping of the grass.

An adjusting plate and

Adjustment

thumb lever at each wheel

position provides cutting

Lever

 

height adjustment. Each

 

adjusting plate has nine

 

height positions. Height of

 

cut will change when you

 

move the thumb lever

 

from one position to

 

another.

 

•Simply depress the lever towards the

wheel and move the lever assembly to desired position. See the illustration in the box above.

Adjusting Carburetor

NOTE: A dirty air cleaner may cause an engine to run rough too. Make sure that the air cleaner is clean and attached to the carburetor before deciding to adjust the carburetor.

WARNING: If any adjustments are made to the engine (e.g. carburetor) while the engine is running, keep clear of all moving parts. Be careful of heated surfaces like the muffler.

To adjust carburetor, please follow the engine manual.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationSlope Operation ServiceChildren Do NotGeneral Service Your ResponsibilitySlope Gauge Hardware Pack Assembling Your Lawn MowerRemoving Unit From Carton Tools RequiredAttaching Grass Catcher Attaching Starter RopeAssembling Grass Catcher Removing Grass CatcherBlade Control Handle Know Your Lawn MowerConverting to Side-Discharge Before Starting Mower Operating Your Lawn MowerGas and Oil Fill-Up Starting Engine Stopping EngineOperating Your Lawn Mower Using the MulcherAdjusting Cutting Height Bagging Grass ClippingsMaintaining Your Lawn Mower Cleaning the Lawn MowerEngine Maintenance To Sharpen Blade Servicing Your Lawn MowerBlade Care Adjusting Carburetor Making AdjustmentsAdjusting Handle Height Replacing Rear FlapMower TROUBLE-SHOOTING GuideGasoline Parts List for Model Series Model Series Page Owner Responsibilities MANUFACTURER’S Limited Warranty for MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio 44136-0019 Phone

430 specifications

The White Outdoor 430 is a robust and versatile lawn mower that combines ease of use with powerful features, making it an excellent choice for homeowners looking to maintain their landscapes efficiently. Known for its reliability, this model caters to various needs, from small residential yards to larger lawns, making it a staple in outdoor maintenance.

One of the main features of the White Outdoor 430 is its powerful engine. Equipped with a high-performance engine, it offers reliable power and durability, ensuring that it can handle tough grass and uneven terrain with ease. The efficiency of the engine translates into a consistent cutting performance, allowing users to complete their lawn care tasks more quickly and with less effort.

The cutting deck of the White Outdoor 430 is designed for precision and flexibility. With adjustable cutting heights, users can tailor the mower’s performance to suit specific lawn conditions and personal preferences. This is particularly beneficial for accommodating various grass types and seasonal changes, ensuring that the lawn is always well-kept and aesthetically pleasing.

Another notable technology incorporated in the White Outdoor 430 is its self-propelled system. This feature significantly reduces the physical strain on the operator, making it easier to navigate around the yard, especially on inclines or uneven surfaces. The self-propelled function allows for a smoother and more controlled mowing experience, enabling users to maintain a consistent pace while mowing.

The mower also features an ergonomic design that enhances user comfort. The adjustable handles allow for a customized height, minimizing fatigue during longer mowing sessions. Coupled with easy-to-use controls, the design promotes user-friendly operation, even for those new to lawn care.

Additionally, the White Outdoor 430 is built with durability in mind. Constructed from high-quality materials, it is designed to withstand the rigors of regular use while requiring minimal maintenance. This focus on longevity ensures that users can enjoy their investment for many seasons to come.

In conclusion, the White Outdoor 430 is a reliable and efficient lawn mower that perfectly balances power, comfort, and advanced technology. Its array of features, including a powerful engine, versatile cutting deck, self-propelled system, and ergonomic design, make it an ideal choice for anyone looking to enhance their lawn care routine with a dependable tool that yields professional results.
Top Page Image Contents