Westinghouse UL-ES-Bethany-WH05 owner manual Trouble, Suggested Remedy

Page 20

UL-ES-Bethany-WH05

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these TROUBLESHOOTING GUIDE installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot

be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.

TROUBLE

1.If fan does not start:

2.If fan sounds noisy:

3. If fan wobbles:

Touching

Ceiling

Figure 1

Blade Tip Down:

Fan Blade

Blade Brackets

Blade Tip Up:

Fan Blade

4. If light does not work:

SUGGESTED REMEDY

1.Check main and branch circuit fuses or circuit breakers.

2.Check wire connections as performed in step #15 or #16 of installation. CAUTION: Make sure main power is turned off.

3.Make sure forward/reverse switch is firmly in up or down position. Fan will not operate when switch is in the middle.

4.If the fan still will not start, contact a qualified electrician. Do not attempt to troubleshoot internal electrical connections yourself.

1.Check to make sure all screws in motor housing are snug (not over tightened).

2.Check to make sure the screws which attach the fan blade holder to the motor are tight.

3.If using an optional Ceiling Fan Light Kit, check to be sure the screws securing the glassware are finger tight. Check to be sure light bulb is tight in socket and not touching glass shade(s). If vibration persists from glass, remove glass and install a 6mm wide rubber band on glass neck to act as an insulator. Replace glass and tighten screws against rubber band.

4.Some fan motors are sensitive to signals from Solid State variable speed controls. DO NOT USE a Solid State variable speed control.

5.Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear after this period.

All blades are weighed and grouped by weight. Natural woods vary in density which could cause the fan to wobble even though all blades are weight-matched. The following procedures should eliminate most of the wobble. Check for wobble after each step.

1.Check that all blades are screwed firmly into blade holders.

2.Check that all blade holders are tightened securely to motor.

3.Make sure that canopy and mounting bracket are tightened securely to ceiling joist.

4.Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades.Measure this distance as shown in Figure 1. Keeping measure within 3mm, rotate the fan until the next blade is positioned for measurement. Repeat for each blade. If all blade levels are not equal, you can adjust blade levels by the following procedure. To adjust a blade tip down, insert a washer (not supplied) between the blade and blade holder at the screw closest to the motor (Figure 2). To adjust a blade tip up, insert washer (not supplied) between the blade and blade holder at the two screws farthest from the motor (Figure 2).

5.If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and possibly result in smoother operation.

1.Check to see that the wire connections in the switch housing are connected.

2.Check for faulty light bulbs.

3.If light kit will still not operate, contact a qualified electrician for assistance.

20

Image 20
Contents Manual DEL Usuario Safety Tips Observe the Following Read and Save These InstructionsConsejos DE Seguridad Haga LO Siguiente LEA Y Guarde Estas InstruccionesFeatures Características COMBO-BLADE Aspas DE Doble CaraPreparing for Installation Antes DE LA Instalación UL-ES-Bethany-WH05 Mounting Options Opciones DE Montaje Choose a Mounting Option Elija una Opción DE MontajeProceed Directly to page 14 for Wiring Options Flush Mount Option Opción DE Instalación AL RASOpción CON Varilla Vertical MÁS Larga Normal Downrod OptionPara Cielorraso Normal Slide downrod ball 1 off of downrod and remove pin Extended Downrod Option Mounting Montaje Wiring Options Opción DE Cableado Wall Control Wiring OptionSecure to Ceiling Blade Installation Instalación DE LAS Paletas UL-ES-Bethany-WH05 Operation and Maintenance OperationOperación Y Mantenimiento OperaciónTrouble Suggested RemedyProblema Solución SugeridaUL-ES-Bethany-WH05 Parts List Lista DE Repuestos DescriptionUL-ES-Bethany-WH05

UL-ES-Bethany-WH05 specifications

The Westinghouse UL-ES-Bethany-WH05 stands out as an exceptional option in the realm of home lighting solutions. Designed to seamlessly blend elegance with functionality, this model provides not just illumination but also enhances the aesthetics of any living space.

One of the main features of the UL-ES-Bethany-WH05 is its energy efficiency. Utilizing LED technology, this fixture delivers bright, long-lasting light while substantially reducing energy consumption. It is designed to have a lifespan of up to 25,000 hours, ensuring that homeowners will not have to frequently replace bulbs, thereby reducing both maintenance costs and environmental impact.

This model boasts a sleek and modern design that is versatile enough to complement various interior styles. Its clean lines and subtle finish make it ideal for use in kitchens, dining rooms, or living areas. The Westinghouse team has crafted the UL-ES-Bethany-WH05 with attention to detail, ensuring that it not only serves a functional purpose but also adds to the overall decor.

One of the key characteristics of the Westinghouse UL-ES-Bethany-WH05 is its adjustable brightness feature, allowing users to customize the lighting according to their mood and needs. This flexibility is greatly appreciated in environments where the ambiance can significantly impact the experience, such as during family gatherings or quiet evenings at home.

The product is equipped with advanced technologies that enhance its usability. The built-in dimming feature is compatible with a range of dimmer switches, giving users greater control over their lighting experience. Additionally, the Westinghouse UL-ES-Bethany-WH05 is designed with safety in mind, as it adheres to stringent safety standards and includes a protective finish to prevent overheating.

Installation of the UL-ES-Bethany-WH05 is straightforward, thanks to its user-friendly design. The fixture comes with all necessary mounting hardware and an easy-to-follow installation guide, making it a suitable choice for both DIY enthusiasts and those who prefer professional installation.

In summary, the Westinghouse UL-ES-Bethany-WH05 perfectly marries aesthetics with technology, offering efficient, durable, and stylish lighting that meets modern needs. Its energy efficiency, adjustable brightness, and sleek design make it a frontrunner in home lighting solutions, setting a standard for both performance and design excellence.