Mounting and Wiring Instructions

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible shock.

2.Thread mounting screws (A) into the cross bar (B) (see figure 1).

3.Secure cross bar (B) to outlet box (C) with outlet box screws (D) (not included). NOTE: Mounting screws must be level for fixture to hang straight.

4.Identify color coding of fixture wires (see figure 2 on page 11).

5.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

6.Fit wire connector (E from fig. 1) over wires and twist until there is a firm connection. If wire connector (E) easily comes off, reattach wire connector (E) and check again for a firm connection (see figure 1).

7.Repeat steps 5 and 6 with the white (group B from fig. 2) fixture wire and outlet box wires.

8.Partially thread green grounding screw (F) into side hole (G) on cross bar (B) (see fig. 1).

9.Wrap ground wire from fixture and ground wire (metal or green wire) from outlet box (C) around green grounding screw (F) on cross bar (B).

10.Tighten green grounding screw (F). Do not over tighten.

11.Tuckwires inside outlet box (C).

FIXTURE ASSEMBLY INSTRUCTIONS

1.Place back plate (H) over mounting screws (A) (see fig. 1).

2.Secure into place with cap nuts (I).

3.Install lamp(s). Do not exceed recommended wattage.

4.Secure glass shade (J) into holder with thumb screws (K.)

5.Turn power back on at circuit box.

W-015 specifications

The Westinghouse W-015 is a notable advancement in the realm of nuclear power technology, designed to cater to the growing energy demands while ensuring safety and efficiency. As a pressurized water reactor (PWR), the W-015 integrates a range of modern features that highlight its commitment to operational performance and safety.

One of the standout characteristics of the Westinghouse W-015 is its modular design. This architecture allows for easier construction and scalability, making it ideal for diverse settings ranging from urban centers to remote locations. The modular components facilitate a reduction in construction time and costs, thereby enhancing the feasibility of nuclear energy as a viable alternative to fossil fuels.

The W-015 leverages advanced fuel technology, employing a mix of conventional and novel fuel cycles to optimize efficiency and minimize waste. Its fuel assemblies are designed for prolonged operational life, resulting in longer intervals between refueling outages. This not only maximizes the reactor's availability but also contributes to more sustainable energy production practices.

Safety is paramount in the design of the W-015. It comes equipped with a comprehensive array of passive safety systems that operate without the need for active controls or operator intervention. These systems are designed to function in emergency scenarios, effectively managing heat removal and maintaining core cooling through gravity-driven mechanisms. Such features significantly enhance the reliability of the reactor, reassuring operators and regulatory bodies alike.

The Westinghouse W-015 also incorporates sophisticated digital instrumentation and control systems. These cutting-edge technologies provide real-time monitoring and analysis of reactor conditions, facilitating proactive management of operations. The human-machine interface is user-friendly, ensuring that plant operators can efficiently respond to any changes in reactor status.

In addition, the W-015 is built with stringent adherence to environmental standards, utilizing advanced containment structures to minimize emissions and environmental impact. The reactor's design also emphasizes the use of lower enriched fuels, which lessens proliferation risks and maximizes the effectiveness of resource utilization.

Overall, the Westinghouse W-015 epitomizes the future of nuclear energy, blending safety, efficiency, and environmental responsibility into a single advanced reactor model. Its innovative technologies and thoughtful design principles position it as a leader in the push for sustainable energy solutions. As the global community continues to explore cleaner energy sources, the W-015 stands poised to play a vital role in the evolution of nuclear power.