Input Connections, Output Connections | Musical Fidelity KW 500

All input, output and power connections should be made with the mains power switched OFF.

INPUT CONNECTIONS

The kW 500 Integrated amplifier has a pair of phono inputs for moving magnet (MM) pickups.

Some turntable/pickup arm combinations are fitted with an extra wire for chassis earthing. This should be connected to the earth terminal on the back panel.

The kW 500 also has five “line level” inputs which are electrically identical, and therefore suitable for use with any source component having an output of at least 300mV. The sockets on the rear panel are marked CD, SACD, TUNER, AUXiliary, and TAPE, to correspond with function buttons on the front panel.

Using good quality co-axial audio leads, connect the left and right outputs from your CD player, tuner or phono/record deck to the appropriate RCA input sockets on the back panel.

Connect the kW 500’s TAPE input sockets to the line output of your tape recorder, and kW 500’s TAPE RECORD output sockets to the line input sockets of the tape deck.

OUTPUT CONNECTIONS

Connect your loudspeakers to the terminals on the back panel marked as LEFT and RIGHT SPEAKER outputs.

CONNECTIONS

PRE-AMPLIFIER OUTPUT

The kW 500 Integrated amplifier has its pre-amplifier output available from RCA sockets on the back panel marked PRE- OUT, and is controlled by the volume adjustment.

This is to allow “bi-amplification” using suitable external amplifiers and crossover networks to power the speaker drive com- ponents separately, giving noticeable improvement in clarity, imaging and bass weight.

In this arrangement, typically the kW 500’s speaker outputs are used to drive the speak- er’s “tweeter” (high audio frequencies), and an external stereo amplifier drives the “woofer” (low frequencies).

The kW 500’s PRE OUT RCA sockets would therefore be connected to the input of the external “woofer” amplifier in this example.

If you are in doubt about bi-amplification, please contact your dealer for advice.

BEFORE SWITCHING ON

Connect the two accessory power supply leads into the RIGHT and LEFT PSU (Power Supply Unit) INPUT sockets at the rear of the amplifier. The other ends of the leads plug into corresponding marked sock- ets on the back panel of the power supply unit.

A single lead with smaller plugs connects between the PRE-AMP PSU sockets on each unit.

Plug the accessory IEC mains lead into the rear PSU mains socket, then the other end into a wall outlet. Turn the volume control on the front panel to low (anticlockwise).

Issue 2: Sept 2004	kW 500 Integrated Amplifier	Instructions for use Page 7 of 10

KW 500 specifications

The Musical Fidelity KW 500 is a high-performance integrated amplifier that is widely recognized for its exceptional sound quality and advanced technology. This amplifier is a perfect blend of power, precision, and musicality, making it a favorite among audiophiles and music enthusiasts.

One of the most notable features of the KW 500 is its power output. With a robust 500 watts per channel into 8 ohms, it can drive even the most demanding speakers with ease. This power is not just about volume; it translates into a dynamic range that allows for the subtle nuances of music to shine through, delivering an immersive listening experience. The KW 500 is designed to deliver an authoritative bass response, crystal-clear mids, and a smooth treble, creating a balanced sound signature across various genres.

The KW 500 incorporates advanced Class A/B amplification technology, providing the best of both worlds—efficiency and sound quality. This type of amplification ensures that the amplifier operates at optimal temperatures while delivering a warm, rich sound. The design features high-quality components, including large capacitors and a robust power supply, which contribute to its overall performance and reliability.

Another key feature of the KW 500 is its impressive array of input options. It comes equipped with multiple analog inputs, including balanced XLR and unbalanced RCA connections, as well as a dedicated phono stage for vinyl enthusiasts. This versatility allows users to connect various audio sources, from digital devices to turntables, facilitating a seamless listening experience.

The KW 500 also includes built-in active crossover technology, enabling it to perform exceptionally well within multi-amplification systems. This feature allows for precise control over the frequency distribution, ensuring that each driver in a speaker system operates optimally. This technology is particularly beneficial for audiophiles who seek to tailor their sound systems to achieve the best possible audio fidelity.

Moreover, the KW 500 is constructed with a heavy-duty chassis that minimizes vibrations and interference, further enhancing audio performance. Its minimalist design not only looks elegant but also serves functional purposes, ensuring that the components remain isolated for the best sound reproduction.

In summary, the Musical Fidelity KW 500 stands out with its powerhouse performance, advanced technologies, and versatility. Its combination of high output power, premium components, and thoughtful design makes it a top choice for those seeking a superior audio experience in an integrated amplifier. Whether you're listening to your favorite vinyl records or streaming high-resolution audio, the KW 500 is built to elevate your musical enjoyment to new heights.