Westinghouse W-105 owner manual Mounting and Wiring Instructions, Fixture Assembly Instructions

Page 4

MOUNTING AND WIRING INSTRUCTIONS

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible shock.

2.Thread mounting screws (A) into the cross bar (B) (see figure 1).

3.Secure cross bar (B) to outlet box (C) with outlet box screws (D) (not included). NOTE: Mounting screws must be level for fixture to hang straight.

4.Identify color coding of fixture wires (see figure 2 on page 11).

5.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

6.Fit wire connector (E from fig. 1) over wires and twist until there is a firm connection. If wire connector (E) easily comes off, reattach wire connector (E) and check again for a firm connection (see figure 1).

7.Repeat steps 5 and 6 with the white (group B from fig. 2) fixture wire and outlet box wires.

8.Partially thread green grounding screw (F) into side hole (G) on cross bar (B) (see fig. 1).

9.Wrap ground wire from fixture and ground wire (metal or green wire) from outlet box (C) around green grounding screw (F) on cross bar (B).

10.Tighten green grounding screw (F). Do not over tighten.

11.Tuckwires inside outlet box (C).

FIXTURE ASSEMBLY INSTRUCTIONS

1.Place back plate (H) over mounting screws (A) (see fig. 1).

2.Secure into place with cap nuts (I).

3.Install lamp(s). Do not exceed recommended wattage.

4.Secure glass shade (J) into holder with thumb screws (K.)

5.Turn power back on at circuit box.

4

Image 4
Contents Outdoor Lighting Fixture Installation Instructions Warranty Information Electrical Shock can Result in Serious InjuryLine art shown may not exactly match the fixture enclosed Mounting and Wiring Instructions Fixture Assembly InstructionsGarantie Limitée DE Cinq ANS Les instructions d’installation demeurent cependant valables Instructions DE Montage ET DE Raccordement Instructions D’ASSEMBLAGE DE Lappareil DéclairageGarantía Limitada DE Cinco Años Advertencia UNA Descarga Eléctrica Podría Causar LesionesFigura Instrucciones DE Montaje Y Cableado Instrucciones DE Montaje DEL ArtefactoMise EN Garde AdvertenciaCleaning and Care Commande DE PiècesOrdering Parts Nettoyage ET Entretien

W-105 specifications

The Westinghouse W-105 is a groundbreaking industrial gas turbine that has made significant contributions to the energy sector. Launched in the late 20th century, the W-105 has been a prime example of combining advanced engineering with reliable performance, making it a preferred choice for power generation in various applications.

One of the hallmark features of the Westinghouse W-105 is its high efficiency. Designed to operate on natural gas, the turbine achieves thermal efficiency rates of over 30%, which makes it a cost-effective option for energy producers. This efficiency minimizes fuel consumption and reduces operational costs, particularly important in competitive markets.

In terms of technologies, the W-105 employs advanced aerodynamics and materials engineering. The blades are crafted with high-temperature superalloys, allowing them to withstand extreme temperatures and stresses during operation. Additionally, the turbine's unique cooling system enhances performance by maintaining optimal temperatures, ensuring longevity and reliability.

The W-105 is also recognized for its modular design, which simplifies maintenance and reduces downtime. This feature is particularly beneficial in industrial settings, where reliability and availability are crucial. The modular construction allows for quick replacement of components, enabling operators to maintain consistent output and efficiency.

Another characteristic of the W-105 is its adaptability. It can be integrated into a variety of systems, including combined cycle and cogeneration setups. This versatility allows it to operate efficiently in a wide range of applications, from peaking power plants to continuous base-load operations. The ability to switch between different fuel sources enhances its appeal in an ever-evolving energy marketplace.

Furthermore, the Westinghouse W-105 is designed with environmental considerations in mind. It meets stringent emissions regulations, significantly reducing NOx and CO2 emissions compared to older turbine models. This makes it an environmentally friendly option for energy production, aligning with global sustainability goals.

Overall, the Westinghouse W-105 represents a significant advancement in gas turbine technology. Its combination of high efficiency, robust design, modularity, adaptability, and environmental consideration makes it an ideal choice for energy producers aiming to meet the demands of today’s dynamic energy landscape. The legacy of the W-105 within the sector continues to influence the design and deployment of modern gas turbines.