Westinghouse 77870 warranty By a licensed electrician, Problem Remote Fails to Operate, Check

Page 1

77870

Installation & Operating Instructions for the

Westinghouse Ceiling Fan and Light Remote Control

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

WARNINGS:

 

SAFETY PRECAUTIONS:

 

 

•

To avoid fire, shock, and serious personal injury, follow all

2.

This wall control is rated for a maximum (ceiling fan only) motor amp

7.

All wiring must conform to national and local electrical codes. If you

 

instructions carefully. Read and save these instructions for

 

future reference.

 

of 1.0 at 120 volts, total (incandescent bulb only) wattage equaling 240

 

feel that you do not have enough electrical wiring knowledge or experi-

•

Do not install or use this unit if any part is damaged or miss-

3.

watt maximum.

 

ence, have your fan control installed by a licensed electrician. Any

 

ing.

Do not use with solid state ceiling fans.

 

electrical work not described in this manual should be performed

•

IMPORTANT! Fan installation must be complete, including the

4.

The decorative housing (canopy) at the ceiling must be metal.

8.

by a licensed electrician.

 

assembly of blades, before testing the remote control unit.

 

The metal housing acts as a protective cover for the Control Unit.

Do not use water or detergents to clean the remote transmitter unit. A

NOTICE:

 

DO NOT USE WITH A NON-METALLIC HOUSING.

 

dry dust cloth will be suitable for most cleaning.

5.

Only the remote unit should be used to change fan speeds. Do not use

9.

Use of this control with some ceiling fans could result in fire, shock,

1.

This control is designed to operate only one ceiling fan with an

6.

the pull chain to change fan speeds after installation.

 

and serious personal injury. Use this fan control only with capacitor

 

incandescent light kit.

Make sure no bare wires are exposed outside of the connectors.

 

speed controlled ceiling fans only.

A. MAKING THE ELECTRICAL CONNECTIONS:

NOTE: This remote only works with some fans in sloped ceiling model.

Do not use fan speed control in canopies where the mounting is not as described in figures 4 or 5. This remote cannot be installed in a downrod style fan when in flushmount mode (when downrod is not in use).

FIGURE 1

 

 

 

 

 

 

 

CONTROL

 

 

 

 

 

UNIT

 

 

AC SUPPLY

BLACK

BLACK

BLUE

BLUE

LIGHT

RED

BLACK

FAN

AC SUPPLY

WHITE

WHITE

WHITE

WHITE

FAN

 

 

 

AC SUPPLY BARE (GROUND)

GREEN

 

FAN

FIGURE - 2

FLUSHMOUNT FANS ONLY

FIGURE - 3

FLUSHMOUNT FANS ONLY

1.Disconnect existing wiring between ceiling fan and AC sup- ply at electrical junction box.

2.FOR FANS ON A DOWNROD: Remove ceiling fan canopy from its mounting plate. Go to step 5.

FOR FLUSHMOUNT FANS: Remove decorative housing from mounting plate (see figure 2). Disconnect mounting bracket from mounting plate and allow to hang from one side (see figure 3).

3.Making the electrical connection:

•Connect GREEN fan wire to BARE (ground) wire.

•Connect BLACK control unit wire to BLACK supply wire (AC L).

•Connect WHITE control unit wire to WHITE supply wire (AC N).

•Connect WHITE control unit wire (MOTOR N) to WHITE fan wire.

•Push the connected wires up into the junction box. Place BLACK wires on one side of box, and WHITE, GREEN and BARE (ground) wires on the other side of the box.

•Connect RED control unit wire (MOTOR L) to BLACK fan wire.

•Connect BLUE control unit wire (FOR LIGHT) to BLUE light wire.

•Push the connected wires up into the junction box.

•Lay the BLACK control unit wire (ANTENNA) on top of the control unit.

•FOR FANS ON A DOWNROD: Lay the control unit in the canopy (see figure 4). Reinstall the canopy on its mount- ing plate. Restore electrical power to the circuit.

•FOR FLUSHMOUNT FANS: Attach the control unit to the mounting plate or to the ceiling with the supplied tie wraps (see figure 5). Reconnect the mounting bracket to the mounting plate (see figure 2). Reinstall the decorative housing on its mounting plate. Restore electrical power to the circuit.

NOTE: If the unit does not fit properly between the mounting plate and ceiling, attach the unit to the underside of the mounting plate.

FIGURE - 4

DOWNROD FANS ONLY

CONTROL

UNIT

FIGURE - 5

FLUSHMOUNT FANS ONLY

CEILING

JUNCTION BOX

CONTROL UNIT

MOUNTING PLATE

B. INSTRUCTIONS FOR YOUR NEW WESTINGHOUSE REMOTE FAN CONTROL SYSTEM

NOTE: Before installing this unit, change the factory code switch setting to your own preferred setting.

Be sure the code switch posi- tions of the transmitter and receiver match each other or the ceiling fan will not function.

If this unit causes interfer- ence with other appliances, you may need to select different combinations.

TRANSMITTER

(BACK OF REMOTE)

1 2 3 4

CODE SWITCHES

1 2 3 4

FIGURE 6

WARNING: HIGH VOLTAGE

Before connecting this control unit:

•Disconnect electrical power from the circuit to be used.

•Household power can cause serious injury or death.

•Wiring must meet all local electrical code requirements.

1.Setting the code on your new remote (see figure 6).

•Remove battery cover. Press firmly below arrow and slide battery cover off.

2.Slide code switches to your choice of UP and DOWN positions (use ball point pen or small screwdriver to slide firmly up or down). Factory setting is all UP. Do NOT use this setting.

3.Setting the code on your new control unit (see figure 7).

•Slide code switches to the same positions as set on your REMOTE.

NOTE: The code switches on the transmitter and the receiver unit must be set to the same positions to work.

FIGURE 7

 

 

WIRES

 

1 2 3 4

 

CODE SWITCHES

 

1 2 3 4

 

RECEIVER

 

(CONTROLLER UNIT)

WIRES

WIRES

C. SETTING THE OPERATING CONTROLS (FIRST TIME ONLY):

1.

This unit operates on one 9 volt battery (included).

 

wall control. This will avoid erratic speeds and possible damage to your

desired speed.

2.

Store the controller unit away from excess heat or humidity.

ceiling fan.

 

 

7. To turn OFF the fan, press the “0” button.

3.

This remote control unit is equipped with 16 code combinations.

5. Operation buttons on the panel of the transmitter:

8. For LIGHT control: Turn the LIGHT ON/OFF by pressing the light bulb

 

Because of the many combinations,

interference from

other remotes

1

–

FAN High speed

 

is possible (i.e. garage openers, car

alarms, security

systems, etc.).

2

– FAN Medium speed

button. If you keep the light bulb button pressed, the LIGHT will dim,

 

If your fan/light goes on or off without using your remote, change the

go off, and come back on at the brightest level. The LIGHT will continue

 

3

–

FAN Low speed

 

codes on both the control unit in the fan and in your remote transmitter.

0

–

FAN Off

to cycle until the light bulb button is released. If you turn your power

4.

If your ceiling fan is equipped with variable speed and light ON/OFF pull

Light Bulb

–

LIGHT brightness and ON/OFF control

source off, the settings on your fan and lighting will not remain the same

 

chain switch controls, make sure to set the speed control at the HIGHEST

 

speed and the light to the ON or BRIGHTEST position before installing the

6. To turn ON the fan, press the selected speed button to run the fan at the

when you turn the power back on.

 

 

 

 

TROUBLESHOOTING GUIDE

 

LIMITED WARRANTY

acts of third parties. See remote manual for proper installation.

 

 

 

 

 

 

 

unauthorized repair, or failures caused by modifications of the product or the

Problem: Remote Fails to Operate

 

The Westinghouse remote control for ceiling fans offers a limited war-

If a warranty claim is made in the first year, simply return the remote with

Check:

 

 

ranty of one year from the date of purchase to the original owner against

a copy of the original sales receipt, freight prepaid to Westinghouse Lighting

•

Is there power to the control unit?

 

 

defects in material and workmanship. All spare parts are covered for

Corporation, who, at its option, shall repair or replace the remote or refund

•

Is the control unit wired correctly?

 

 

ninety days only. This warranty is in lieu of all other warranties expressed or

the purchase price. Please pack product correctly to eliminate shipping

•

Are the fan and light switches set on the highest position?

implied.

 

 

damage. Send all remotes and inquiries to:

•

Is there a good battery in the remote? If the red indicator lights when either

 

 

Westinghouse Lighting Corporation

Westinghouse will repair or replace this remote control if it is defec-

 

button is pushed, the battery is good.

 

 

Attn: Customer Service

 

 

 

tive due to faulty materials or workmanship. This warranty does not cover

•

Are the switches set the same in both the remote and the control unit?

service charges, batteries, defects resulting from accidents, damages caused

12401 McNulty Road

Problem: Short Range

 

 

 

 

through abuse or alterations or by affixing any attachment not provided with

Philadelphia, PA 19154-1099

Solution:

 

 

the product, improper installation or maintenance, failure of supporting

If you have any questions regarding the installation of this item or the

•

If the remote can operate the control unit when close to it but does not oper-

devices not supplied as original mounting hardware, exposures to extremes

 

ate it at distances of 30-50 feet, try placing the black antenna wire above the

warranty coverage, please call our consumer line at 1-888-417-6222and a

 

ceiling and outside of the junction box.

 

 

of heat or humidity, incorrect voltage, surges in current,

representative will assist you.

Westinghouse Lighting Corporation, Philadelphia, PA 19154-1099, U.S.A. • Westinghouse Lighting Corporation, a Westinghouse Electric Corporation licensee • www.westinghouseceilingfans.com and “Wesinghouse” are all registered trademarks of Westinghouse Electric Corporation • © 2004 Westinghouse Lighting Corp.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Problem Short Range Problem Remote Fails to OperateSolution By a licensed electricianProblema Poco alcance Problema El control remoto no funcionaLa parte inferior de la placa de montaje El cableado debe cumplir con los códigos eléctricos localesTeurs de lémetteur et du récepteur doivent correspondre Problème La télécommande ne fonctionne pasVérifiez les éléments suivants Problème ‑ Portée trop courte

77870 specifications

The Westinghouse 77870 is a high-performance compact refrigerator designed for modern living spaces, catering to individuals and small families who need efficient yet stylish cooling solutions. This model combines practicality with aesthetics, making it a great addition to any kitchen or living area.

One of the key features of the Westinghouse 77870 is its generous storage capacity. With approximately 5.5 cubic feet of interior space, it provides ample room for groceries, snacks, and beverages. The interior layout is thoughtfully designed, incorporating adjustable glass shelves that allow users to customize their storage needs while maximizing space. In addition, a separate crisper drawer helps keep fruits and vegetables fresh, further enhancing the refrigerator’s usability.

The design reflects a sleek and modern style, featuring smooth lines and an attractive finish. Available in multiple color options, it easily complements various interior designs. Its compact size makes it suitable for a range of environments, such as apartments, dorms, or offices where space is at a premium.

In terms of technology, the Westinghouse 77870 employs energy-efficient cooling mechanisms, ensuring low energy consumption while maintaining optimal performance. It is equipped with an adjustable thermostat, allowing users to set their preferred cooling levels. This feature not only enhances user experience but also contributes to energy savings.

The refrigerator operates quietly, making it an ideal choice for spaces where noise could be disruptive, such as bedrooms or study areas. Additionally, the reversible door feature provides flexibility for installation, allowing it to fit seamlessly into any layout.

Safety and convenience are also prioritized in the design of the Westinghouse 77870. It includes a built-in light that illuminates the interior, making it easy to locate items, even in low-light conditions. The door also features a storage compartment for cans or small containers, optimizing space on the door shelves.

Overall, the Westinghouse 77870 stands out as a functional and stylish option for those seeking a reliable refrigerator that can adapt to their lifestyle needs. Its combination of efficiency, storage capacity, and modern design highlights its commitment to meeting the demands of contemporary living. Whether used in a home, office, or recreational space, it provides a great cooling solution for everyday use.
Top Page Image Contents