Troubleshooting guide, Trouble Suggested Remedy

Troubleshooting guide

ETL-ES-Wengue-WH10

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.

TROUBLE	SUGGESTED REMEDY

1. If fan does not start:	1. Check main and branch circuit fuses or circuit breakers.
	2.	Check wire connections as performed in step #15 or #16 of installation.
		CAUTION: Make sure main power is turned off.
	3.	Make sure forward/reverse switch is firmly in up or down position.
		Fan will not operate when switch is in the middle.
	4.	If the fan still will not start, contact a qualified electrician.
		Do not attempt to troubleshoot internal electrical connections yourself.
2. If fan sounds noisy:	1. Check to make sure all screws in motor housing are snug (not over tightened).
	2.	Check to make sure the screws which attach the fan blade holder to the motor are tight.
	3.	Some fan motors are sensitive to signals from Solid State variable speed controls.
		DO NOT USE a Solid State variable speed control.
	4.	Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear
		after this period.
3. If fan wobbles:	All blades are weighed and grouped by weight. Natural woods vary in density which could cause
	the fan to wobble even though all blades are weight-matched. The following procedures should
	eliminate most of the wobble. Check for wobble after each step.
	1.	Check that all blades are screwed firmly into blade holders.
	2.	Check that all blade holders are tightened securely to motor.
	3.	Make sure that canopy and mounting bracket are tightened securely to ceiling joist.
	4.	If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute
	the weight and possibly result in smoother operation.
4. If light does not work:	1. Check to see that the wire connections in the switch housing are connected.
	2.	Check for faulty light bulbs.
	3.	If light kit will still not operate, contact a qualified electrician for assistance.

NOTICE

This ‘Energy Policy Act 2005’ compliant fan includes a device that limits the total wattage of its light fixture to 190 watts.

By installing a combination of light bulbs that exceeds 190 watts or if an electrical surge causes the wattage to exceed 190 watts, the light fixture will either dim the lights to 190 watts or will automatically turn off.

To restore the light levels, make sure the total wattage of the light bulbs does not exceed 190 watts and follow the applicable directions below:

For fans with Pull Chains:

Pull the light fixture’s pull chain two times to reset the light fixture. If the power to your fan is controlled by a toggle wall switch, it may be necessary to turn the power off and back on at the wall switch.

For fans with Wall Controls:

Press the light button on the wall control “off” and “on”

once to reset the light fixture.

For fans with Remote Controls:

If you verify the wattage and the lights do not turn on, press the light button on the remote control twice to reset the light fixture.

NOTE: If the procedures above do not reset the lights,

turn off the main power source, located at the breaker panel or box,

and then turn it on again.

WH10 specifications

The Wenger WH10 is a sophisticated timepiece that epitomizes precision and craftsmanship in the world of wristwatches. Renowned for its elegant design and advanced technology, the WH10 is perfect for individuals seeking a blend of functionality and style.

One of the standout features of the Wenger WH10 is its Swiss quartz movement, which ensures high accuracy and minimal maintenance. This reliable movement guarantees that the watch keeps time flawlessly, making it a preferred choice for those who value punctuality. Additionally, the watch boasts a durable stainless steel case, which not only provides a sleek appearance but also protects the internal components from damage.

The WH10 is designed to be water-resistant, offering protection against splashes and brief immersion in water, making it suitable for everyday wear. With a water resistance rating of up to 100 meters, the watch is ideal for light swimming and recreational use. This feature adds to its versatility, allowing users to transition from professional settings to outdoor adventures with ease.

A striking aspect of the Wenger WH10 is its legible dial. The watch features bold hour markers and hands, complemented by a date window, enhancing readability in various lighting conditions. The luminous elements on the hands and markers improve visibility at night, making it functional for all-day wear.

Another notable characteristic of the WH10 is its comfortable leather strap, which can be adjusted for the perfect fit. The strap not only adds a touch of sophistication but also ensures comfort during long periods of wear. The combination of a sturdy case and high-quality materials contributes to the overall durability of the timepiece.

Wenger, as a brand, is synonymous with quality, and the WH10 is no exception. With meticulous attention to detail, the watch reflects the brand's commitment to producing reliable and stylish timepieces. Whether for everyday wear, formal occasions, or outdoor exploration, the Wenger WH10 stands as a testament to exquisite Swiss watchmaking, delivering exceptional performance and timeless elegance. This model combines functionality and aesthetics, making it a remarkable addition to any watch enthusiast's collection.