CD SPECIAL FEATURES | |
|
|
REPEAT PLAYBACK
The REPEAT button on the remote control allows the repeated playback of either one track or all tracks on the disc.
By pressing the REPEAT button once, only the current track is repeated, and the display shows
PLAY 1 | 0:12 |
repeat track |
|
|
|
If the REPEAT button is pressed a second time,
“repeat disc” is displayed instead, and the entire disc is then played repeatedly.
PLAY 1 | 0:24 |
repeat disk |
|
|
|
Pressing REPEAT a third time cancels repeat mode.
A-B REPEAT PLAYBACK
When the desired starting point is reached, press button A / B on the remote control.
The display will show
PLAY 1 | 0:34 |
repeat a- |
|
|
|
When the disc has reached the end of the required section, press the A / B button again, to display and the unit
PLAY 1 | 1:55 |
repeat |
|
|
|
continuously plays the selected part of the disc in this case, the segment of track 1 from 34 seconds to 1 minute 55 seconds.
To cancel
SHUFFLE PLAYBACK
The SHUFFLE feature allows tracks on the discs to be played in random sequence rather than the normal consecutive order.
PLAY 1 | 0:34 |
shuffle disc |
|
|
|
Tracks are also played in a different order each time the disc is restarted, or another disc loaded.
That track number will now appear in the display:
This function is obtained by pressing SHUFFLE on the the remote control with the unit either stopped or playing. If the
Shuffle play is cancelled by pressing the SHUFFLE button a second time. The unit resumes normal play function, continuing to the end of the disc in normal order starting from wherever it was left by the previous random selection.
From stop mode, pressing PLAY/PAUSE also begins shuffle play.
If REPEAT is then pressed whilst in shuffle mode, a repeat shuffle function is obtained
| PLAY 7 | 0:39 |
|
| repeat shuffle |
|
|
|
|
| |
Pressing >> selects the next track in random order. |
SCAN INTRODUCTION
The
Press INTRO on the remote control, and if the player has stopped, the display will show
STOP 74 scan intro
The first ten seconds (approximately) of each track on the CD can then be played in sequence by pressing either PLAY/PAUSE on the front panel, or PLAY on the remote control.
Press INTRO again to cancel introduction search mode. If INTRO mode is cancelled while the
PROGRAMMED PLAY
The
STOP 74
program 1 track 0
On the remote control, press the numeric button of the track number corresponding to the first track you wish to store (number 3 for example).
When all programmed tracks have been played, the CD
| Page 11 of 15 |
Issue 3: 1st September 2006 | |
|
|