Setting temperature unit
Water temperature can be displayed in either Fahrenheit (˚F) or Celsius (˚C). Press Ok key a seventh time.
The display will show either ˚F or ˚C.
Use (+) or
Press Ok key a last time to go back to normal mode.
Water temperature regulation
In a regulation cycle, the system first generates water flow through the heater housing and the plumbing, in order to ensure accurate water tem- perature readings as well as avoiding heater activation in dry conditions.
After verifying pump activation and taking a water temperature reading if required, the system automatically turns the heater on to reach and maintain water temperature at Set Point.
Cooldown
While performing these tasks, the heater is not allowed to turn on and its icon flashes. The heater is not allowed also to come on throughout the cool down period of the heater element.
Smart Winter Mode
Our Smart Winter Mode protects your system from the cold by turning pumps on several times a day to prevent water from freezing in pipes.
29