Woods Equipment BSE4 manual Warranty

Page 22

WARRANTY

(All Models Except Mow’n MachineTM Zero-Turn Mowers and Woods BoundaryTM Utility Vehicles)

Please Enter Information Below and Save for Future Reference.

 

Date Purchased: ____________________________

From (Dealer): __________________________________________

Model Number: ____________________________

Serial Number: __________________________________________

Woods Equipment Company (“WOODS”) warrants this product to be free from defect in material and workmanship. Except as otherwise set forth below, the duration of this Warranty shall be for TWELVE (12) MONTHS COMMENCING ON THE DATE OF DELIVERY OF THE PRODUCT TO THE ORIGINAL PURCHASER.

Woods backhoe models BH70-X, BH80-X, and BH90-X are warranted for two (2) years from the date of delivery to the original purchaser.

The warranty periods for specific parts or conditions are listed below:

Part or

 

Duration (from date of delivery

Condition

Model Number

to the original purchaser)

Warranted

 

 

 

 

 

 

 

BW1260, BW1620, BW1800, BW2400

8 years

 

 

 

 

BW240HD

7 years

 

 

 

 

BB48X, BB60X, BB72X, BB84X, BB600X, BB720X, BB840X, BB6000X, BB7200X,

6 years

Gearbox

BB8400X, DS1260, DSO1260, DS1440, TS1680, BW126-3, BW180-3, BW240

 

components

PHD25, PHD35, PHD65, PHD95, 2162, 3240, DS96, DS120, RCC42, RM550-2,

 

 

RM660-2, RM990-3, PRD6000, PRD7200, PRD8400, 7144RD-2, 9180RD-2,

5 years

 

9204RD-2, S15CD, S20CD, S22CD, S25CD, S27CD

 

 

 

 

 

RDC54, RD60, RD72

3 years (1 year if used in rental or

 

commercial applications)

 

 

 

 

 

Blade

RM550-2, RM660-2, RM990-3, PRD6000, PRD7200, PRD8400, 7144RD-2, 9180RD-2,

3 years

spindles

9204RD-2

 

Rust-through

BB600, BB720, BB840, BB6000, BB7200, BB8400, BW126-3, BW180-3, BW1260,

10 years

 

BW1800, BW240, BW240HD, 2162, 3240, DS1260, DSO1260, DS1440, TS1680

 

Under no circumstances will this Warranty apply in the event that the product, in the good faith opinion of WOODS, has been subjected to improper operation, improper maintenance, misuse, or an accident. This Warranty does not apply in the event that the product has been materially modified or repaired by someone other than WOODS, a WOODS authorized dealer or distributor, and/or a WOODS authorized service center. This Warranty does not cover normal wear or tear, or normal maintenance items. This Warranty also does not cover repairs made with parts other than those obtainable through WOODS.

This Warranty is extended solely to the original purchaser of the product. Should the original purchaser sell or otherwise transfer this product to a third party, this Warranty does not transfer to the third party purchaser in any way. There are no third party beneficiaries of this Warranty.

WOODS makes no warranty, express or implied, with respect to engines, batteries, tires or other parts or accessories not manufactured by WOODS. Warranties for these items, if any, are provided separately by their respective manufacturers.

WOODS’ obligation under this Warranty is limited to, at WOODS’ option, the repair or replacement, free of charge, of the product if WOODS, in its sole discretion, deems it to be defective or in noncompliance with this Warranty. The product must be returned to WOODS with proof of purchase within thirty (30) days after such defect or noncompliance is discovered or should have been discovered, routed through the dealer and distributor from whom the purchase was made, transportation charges prepaid. WOODS shall complete such repair or replacement within a reasonable time after WOODS receives the product. THERE ARE NO OTHER REMEDIES UNDER THIS WARRANTY. THE REMEDY OF REPAIR OR REPLACEMENT IS THE SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE OF THIS WARRANTY. WOODS MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND WOODS SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY AND/OR ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

WOODS shall not be liable for any incidental or consequential losses, damages or expenses, arising directly or indirectly from the product, whether such claim is based upon breach of contract, breach of warranty, negligence, strict liability in tort or any other legal theory. Without limiting the generality of the foregoing, Woods specifically disclaims any damages relating to (i) lost profits, business, revenues or goodwill; (ii) loss of crops; (iii) loss because of delay in harvesting; (iv) any expense or loss incurred for labor, supplies, substitute machinery or rental; or (v) any other type of damage to property or economic loss.

This Warranty is subject to any existing conditions of supply which may directly affect WOODS’ ability to obtain materials or manufacture replacement parts.

No agent, representative, dealer, distributor, serviceperson, salesperson, or employee of any company, including without limitation, WOODS, its authorized dealers, distributors, and service centers, is authorized to alter, modify, or enlarge this Warranty.

Answers to any questions regarding warranty service and locations may be obtained by contacting:

Woods Equipment

Company

2606 South Illinois Route 2

Post Office Box 1000

Oregon, Illinois 61061 USA

800-319-6637 tel

800-399-6637 fax www.WoodsEquipment.com

F-3079 (Rev 8/26/2008)

Page 21 Page 23
Image 22
Page 21 Page 23
Contents BOX Scraper &REAR Blade Introduction To the DealerTable of Contents General Information SpecificationsBSE4 BSE5 RBE4 RBE5 Safety Safety RulesMaintenance StorageRBE BSE Be Careful Safety & Instructional DecalsSerial Number Plate RBE BSE To Avoid Serious Injury or DeathOperation Connecting AttachmentsOperation CategoryOperating Techniques BOX Scraper Angling Operating Techniques Rear BladeReversing PRE-OPERATION Check ListAdjusting or Removing Scarifier Shanks MaintenanceMaintenance BOX ScraperAfter Each Use Cleaning BOX Scraper & Rear BladeReplacing Scarifier Tooth Periodically or Before Extended StorageRemove Components from Shipping Configuration AssemblyAssembly Dealer SET-UP InstructionsAssemble Box Scraper Box Scraper AssembledRear Blade Assemble Rear BladePRE-DELIVERY Check List Dealer Check ListsDealer Check Lists Delivery Check ListCategory 1 Quick Hitch Bushing KIT #1022040 PartsBSE4 / BSE5 BOX Scraper Optional for BSE & RBE MoldelsRBE4 / RBE5 Rear Blade Parking Stand KIT #1021065 Optional for Rear Blade onlyMetric Series Torque Chart Bolt Torque ChartSAE Series Torque Chart AppendixBolt Size Chart AbbreviationsWarranty Rev /23/2005 Woods Equipment Company

BSE4 specifications

The Woods Equipment BSE4 is a leading-edge attachment designed for those who need a reliable and efficient solution for their landscaping, agricultural, and maintenance needs. This high-performance equipment is specifically crafted to meet the rigorous demands of various tasks while ensuring maximum productivity.

One of the standout features of the BSE4 is its robust build quality. Constructed with heavy-duty materials, it offers exceptional durability and resistance to wear and tear, making it suitable for use in tough environments. The solid frame ensures stability during operation, which is crucial for achieving precise results when tackling different tasks.

In terms of functionality, the BSE4 is designed to be versatile. It can be easily attached to a range of compatible tractors and utility vehicles, providing users with flexibility in their operations. This adaptability allows for seamless transitions between different jobs, whether it's clearing land, managing brush, or maintaining landscapes.

The BSE4 incorporates advanced technology to enhance its performance. It features a powerful hydraulic system that offers superior control and efficiency. This system enables the operator to easily adjust the speed and angle of the attachment, allowing for customized operation depending on the task at hand.

Another impressive characteristic of the BSE4 is its enhanced safety features. With a focus on user safety, it comes equipped with protective guards and shields that prevent debris from being propelled during use. This ensures a safer working environment for both the operator and bystanders.

The design of the BSE4 also prioritizes maintenance ease. With accessible components, routine maintenance tasks can be performed quickly and conveniently, minimizing downtime and increasing operational efficiency. The attachment’s intuitive design allows users to spend more time working and less time on upkeep.

Furthermore, the BSE4 is engineered for excellent performance in various terrain types. Whether working on soft soil, rocky landscapes, or uneven ground, its strong build and advanced design provide the stability and power needed to get the job done effectively.

In summary, the Woods Equipment BSE4 stands out as a formidable attachment that combines durability, versatility, and advanced technology. Its impressive features, including a powerful hydraulic system, robust construction, and user-friendly design, make it an essential tool for professionals seeking to maximize their productivity in demanding environments. With the BSE4, users can confidently tackle a wide range of tasks, ensuring exceptional results every time.
Top Page Image Contents