Woods Equipment M8200 manual Install Fittings to Tractor Hydraulic Line

Page 20

2

#56037 Valve Kit & #40547 Hose Kit Cont’d

￿￿￿￿￿￿

Install Fittings to Tractor Hydraulic Line

 

 

Refer to Figure 17 and Figure 18.

￿ ￿ ￿

￿￿ ￿￿ ￿￿

 

1.

If not done during installation of right rear loader

 

 

mount, remove the tractor hydraulic line connector

 

/,1(

tube or adapter block (if equipped) as shown in Figure

 

6833257

2.

 

 

%5$&.(7

NOTE: If 90-degree elbow (4) includes a nut and

 

 

sleeve, discard them.

 

 

2.

Connect adapters (2) to each 90-degree elbow

 

 

(4) and tighten. NOTE: Use sealant on pipe threads.

72 /2$'(5

)520 /2$'(5 9$/9(

3.

Attach adapters (2) to PBY and IN hoses. Tighten

9$/9( ,1 3257

3%< 3257

finger tight.

￿(1*,1( (1'￿

￿75$160,66,21 (1'￿

4.Route IN hose inside the right loader mount. Install elbow onto end of tractor hydraulic line as shown in Figure 18.

5.Route PBY hose inside right loader mount. Remove plastic cap and install onto transmission end of tractor hydraulic line as shown in Figure 18.

6.Point elbows up and slightly out to clear the hydraulic Return line as shown.

7.Tighten elbows to tractor line and tighten hoses to adapters.

Figure 18 Hose Hanger Bracket Installed

2.315038 1/2 NPTF x 3/4 JICM Adapter

4.40549 1/2 NPTM x M26 x 1.5M 90° Elbow

7.360130 54” Hose

11.480261 Clamp

12.6128 1/4 NC Lock nut

13.300057 1/4 NC x 3/4 Cap screw

18 Hydraulic Installation

PN-46018 (Rev. 3/15/02)

Image 20
Contents 46018 Model 111868 Loader Mounting Kit To the DealerPreparation InstallationTraining Maintenance OperationSafety Safety & Instructional Decals Crushing Hazard Loader Mount Installation Tractor PreparationLoader Mount Installation Cont’d Remove Tractor Connector Tube or Adapter BlockInstall Crossmember Install Rear Loader MountsInstall Front Mount Bracket Install Side RailsInstall Grill Guard Torque HardwareHydraulic Installation Install Hose Clamp Bracket & Channel #40542 Hose Kit For use with tractor remotesRoute Hoses & Install Hose Support Install Fittings to HosesConnect Hoses to Tractor Verification of Control Movements#56037 Control Valve Installed Typical installation General Description#56037 Valve Kit & #40547 Hose Kit Cont’d Assemble Control Valve Kit#40547 Hose Kit Assembly Assemble #40547 Hose KitInstall Fittings to Tractor Hydraulic Line Install Hose Retainer & Line Support Bracket Connect Feedline HosesTorque Hardware & Tighten Fittings Wrench Bolt Qty Size Required TorqueInstall Control Valve Spool #56038 or 3-Spool #56042 Valve Guard Assembly#56038 Valve Kit & #46047 Hose Kit Cont’d Connect Controller to CablesInstall Controller Stand Bracket Assembled Control Stand BracketInstall Controller Stand Controller Stand AssemblyAdjust Control Cable Attach Control Cables to ValveInstall OUT Line Install in & PBY Lines Connect Loader Feedline Hoses Connect Hoses to Control Valve231 Hydraulic Installation Parts Loader Mounting KIT Part QTY DescriptionFor USE with Tractor Remote Control Lever #40542 Hose KITControl Valve Control Valve Parts List Cable Control Valve Parts #56038 2 Spool Valve #56042 3 Spool ValveCable Control Valve Parts List Part QTY#46047 Hose KIT To be Used with CABLE-OPERATED Controls#40547 Hose KIT For USE with LOADER-MOUNTED Control LeverSAE Series Torque Chart Metric SeriesBolt Size Chart Abbreviations Warranty Model No Part Warranted Duration 46018

M8200 specifications

Woods Equipment M8200 is a versatile and robust piece of machinery designed for a variety of agricultural and landscaping tasks. Known for its durability and performance, the M8200 offers users a range of advanced features and technologies that enhance its efficiency and ease of use.

One of the standout characteristics of the M8200 is its powerful engine. It is equipped with a high-performance engine that delivers impressive horsepower, ensuring it can handle demanding tasks such as mowing, tilling, and snow removal with ease. The engine's engineering not only provides power but also emphasizes fuel efficiency, which is crucial in reducing operational costs.

The M8200 is designed with user comfort in mind. It features an ergonomic operator station that allows for easy access to controls, reducing operator fatigue during long hours of use. The spacious cabin provides good visibility, allowing operators to maintain awareness of their surroundings while working. Additionally, the superior suspension system absorbs shocks and vibrations, ensuring a smoother ride over uneven terrains.

Technology plays a vital role in the M8200's performance. The machine is equipped with cutting-edge precision agriculture technology that allows for optimal field mapping and efficient resource management. This technology helps farmers and landscapers achieve maximum productivity by ensuring that every inch of land is utilized effectively.

Another significant feature of the Woods Equipment M8200 is its attachment compatibility. The M8200 can easily accommodate a wide range of attachments, including rotary cutters, plows, and box blades, making it multifunctional. This adaptability is beneficial for users who need to perform different tasks throughout the year, as it saves costs and space.

The safety features of the M8200 are also commendable. It comes with a roll-over protective structure (ROPS), seatbelts, and strategically placed controls that minimize the risk of accidents. Enhanced lighting systems improve visibility during nighttime operations, ensuring that users can work safely around the clock.

In summary, the Woods Equipment M8200 is a powerful and versatile machine, perfect for agricultural and landscaping tasks. Its strong engine, operator-friendly design, advanced technology, attachment compatibility, and robust safety features make it a valuable asset for any operator focused on efficiency and performance. This tractor continues to be a preferred choice among professionals looking for reliability and innovation in their equipment.