Hardware

REF	PART		QTY	DESCRIPTION
1	6911		2	Chain (7 link)
2	10772		2	Lift angle
3	18314		2	1/2 x 5/8 x 5/16 Sleeve
4	9814	†	1	Idler and mounting frame assembly
				(standard)
5	2688		6	5/32 Cotter pin
7	18440		1	Belt (special W180)
8	4336		2	Idler sheave with bearing
9	4335		2	Idler sheave without bearing
10	6095		2	Bearing (for ref 8)
11	3493		1	Drive sheave 6.1 PD
12	1506		1	Spindled bushing with bolts
13	18310		1	Drive shield
14	18241		2	Channel arms (standard) -or-
14	13314		2	Channel arms (use when idler
				bracket measures 26-1/2" between
				vertical push bars)
15	18245		1	Crosswise rear support
				(standard) -or-
15	3485		1	Crosswise rear support (use when
				idler bracket measures 26-1/2"
				between vertical push bars)
16	18240		1	Rear wheel spacer kit (optional)
				(use with 13.6 - 16 turf tires)
17	27207		1	3-Point hitch bracket kit (optional)
				(includes two ref 18 and ref 19, and
				necessary hardware)
18	18371		2	3-Point hitch lift lug
19	27208		2	3-Point hitch mounting bracket

202457 * 1/4 NC x 3/4 Hex head cap screw GR5

2171851 * 5/16 NC x 3/4 Flange head bolt GR5

22976 * 3/8 NC x 1-1/2 Hex head cap screw GR5

23835 * 3/8 NC Hex nut

24838 * 3/8 Lock washer

25565 * 3/8 Flat washer

5762

3/8 NC Eye bolt

2724576 * 1/2 NC x 1-3/4 Hex head cap screw GR5

2811900 * 1/2 NC Flange lock nut

4097

5/8 x 1-1/2 Clevis pin

305836 * 5/8 NC x 2-1/2 Carriage bolt GR5

31230 * 5/8 NC Hex nut

321286 * 5/8 Lock washer

33692 * 5/8 Flat washer

34	410		5/8 x 1-3/4 Clevis pin
35	2615	*	1/2 NC x 1-1/4 Carriage bolt GR5
36	18250		1/2 NF x 1-1/2 HHCS, GR5 (order
			with item 37)
37	23389		Wheel spacer bolt sleeve (order
			with item 36)
38	854	*	1/2 Flat washer
39	24667		1/2 x 5/8 x 7/16 Bushing
40	855	*	1/2 Lock washer

*Standard hardware, obtain locally

†On early models where push arms measure 26-1/2" between them, also order two #18241, one #18245, and two #8098.

29932 (Rev. 8/10/2007)	Parts 17

HARDWARE