Woods Equipment 42C-6 manual Side Shield or Discharge Chute Installation

Page 10

LA6

Figure 5. Side Skid and Side Shield

SIDE SHIELD OR DISCHARGE CHUTE INSTALLATION

A side shield and discharge chute are provided for right side of mower. The side shield should be used for nor- mal operating conditions. The discharge chute may be used to replace side shield for very heavy mowing con- ditions.

A DANGER

Do not operate mower unless either discharge chute or side shield is installed.

A

Keep hands and feet away from mower while tractor engine is running. Stay clear of all moving parts.

Left Side Shield Installation

Attach side shield (9) to mower with 3/8 x 1" bolts (21) and 3/8" flanged lock nuts (24). Insert bolts from inside out. See Figure 5.

Right Side Shield and Baffle Installation

Attach rear of side shield baffle (5) to mower, and front portion to right side shield (4) with 3/8 x 3/4" carriage bolts (20) and lock nuts (25), inserted from inside out.

Figure 6. Side Shield & Baffle Installation

Discharge Chute Installation

Remove side shield (4). Attach discharge chute (13) to mower frame with 3/8 x 1" bolts (20) and 3/8" flanged lock nuts (25).

LA8

Figure 7. Discharge Chute Installation

OVER-RUNNING CLUTCH INSTALLATION

See page 20. Install the two keys (13) in spindle shaft and place over-running clutch pulley unit on spindle shaft with bolted flange on top. Make sure it lines up with keys in shaft. Place three washers on top of spin- dle shaft (16), install weather cap (15), and secure with 3/8 x 1-1/2" bolt (14) and lock washer (4).

CLUTCH BELT SHIELD INSTALLATION

See page 16. Install drive belt on pulley, then install drive shield (6) to mower frame with 3/8 x 1" bolts (21), 3/8" lock washers (23) and nuts (24).

NOTICE

This shield is not used when mower is installed on IH Low Boy tractors because of minimum clear- ance under tractor.

10 Assembly

29900 (Rev. 7/6/2007)

 

 

Image 10
Contents Rotary Mower Introduction To the DealerTable of Contents General InformationTraining SafetySafety Rules PreparationTransportation MaintenanceStorage Safety & Instructional Decals Be CarefulOperation OperationService ServiceAssembly AssemblyOVER-RUNNING Clutch Installation Side Shield or Discharge Chute InstallationClutch Belt Shield Installation Mounting Frame Assembly Push Channel / Push Channel Mounting Angles and Lift BarsMounting Frame Assembly Photo Mounting Frame Assembly Photo with Rear Shield Lift Assembly Photo PRE-DELIVERY Check List Dealer Check ListDealer Check Lists Delivery CheckCW Main Frame Assembly PartsPart QTY Description 42C-6 Mounting Frame Assembly Drawing 42C-6 Mounting Frame Assembly Overrunning Clutches Lift Chain Hook-Up Table Manual Height Adjustment Chain see chart for chain used on Spindle Assembly Metric Series Torque Chart Bolt Torque ChartSAE Series Torque Chart AppendixBolt Size Chart AbbreviationsWarranty Woods Equipment Company

42C-6 specifications

Woods Equipment has a long-standing reputation for producing high-quality agricultural implements and attachments, and the 42C-6 is a standout in their lineup. Designed primarily for compact utility tractors, this rotary cutter is engineered to offer reliable performance, durability, and ease of use for both commercial and residential applications.

One of the main features of the Woods 42C-6 is its cutting width of 42 inches, making it an ideal choice for maneuvering in tight spaces without sacrificing productivity. It is equipped with a heavy-duty steel deck that provides exceptional strength and durability, allowing it to handle tough brush and grass with ease. The cutter incorporates reinforced sidebands and a robust frame, ensuring a long lifespan even under rigorous conditions.

The 42C-6 showcases advanced cutting technology with its high-speed blade rotation. This feature enhances the efficiency of grass and brush cutting, delivering a clean and precise cut. Additionally, the blades are designed to be easily replaceable, which simplifies maintenance and reduces downtime for operators.

Another notable characteristic is the adjustable hitch. The Woods 42C-6 offers a universal mount that allows compatibility with a wide range of tractor models. This flexibility makes it an attractive choice for farm owners and landscaping businesses seeking to maximize their equipment's versatility.

Safety is a priority in the design of the 42C-6. It is equipped with a safety guard that minimizes the risk of debris being flung from the cutter, ensuring a safer working environment. The cutter also features a slip clutch that protects the driveline from overload, further enhancing its reliability during operation.

Ease of operation is another significant advantage of the Woods 42C-6. With a straightforward attachment process, operators can quickly connect and disconnect the cutter, saving valuable time during job transitions. The cutter's lightweight design further enhances maneuverability, allowing users to navigate around obstacles with confidence.

In summary, the Woods Equipment 42C-6 rotary cutter combines durability, efficiency, and safety in a compact package designed for various cutting needs. With its robust construction, ease of use, and reliable performance, it is well-suited for those looking to tackle tough mowing jobs in a variety of settings. Whether for agricultural use or landscaping projects, the 42C-6 stands as a testament to Woods Equipment's commitment to quality and innovation in outdoor equipment.