Swisher LS67525, LS928, LS622, LS11534, LS12534D owner manual Operation, Assembly Instructions

Page 6

OPERATION

Intended use: This log splitter is intended and designed to only split wood. NEVER use for any other purposes. Doing so can cause injury or VOID THE WARRANTY.

ASSEMBLY INSTRUCTIONS

This log splitter has been partially assembled at the factory. Refer to the drawings and part lists should it become necessary to disassemble the unit for repair or replacement of parts. Inspect all components for damage.

WARNING: Exercise extreme caution, as parts are very heavy. Sufficient persons or mechanical handling equipment should be used.

IMPORTANT: This unit is shipped with oil but without gasoline in the engine. After assembly, see separate Engine Manual for proper fuel and oil recommendations.

1.General Assembly: Remove top, sides and ends of crate. Place crate panels aside to avoid puncturing tires. Remove tongue assembly from top.

2.Carefully set the beam pre-assembly aside.

3.Attach tongue to tank/mount plates using two bolts and nuts. Be certain hardware is secure. (See Assembly Figure 1)

4.Remove tank/engine assembly from base of crate and discard banding.

5.Fender Assembly: Remove fenders from box. Mount to fender brackets with 5/16 hardware provided. Make sure fender clears wheel.

6.The cylinder is tied to the base. Remove ties and slide cylinder/wedge forward aligning clevis at cylinder end to beam. Insert pin and retaining clips, check component to assure proper assembly. Stand beam pre-assembly vertical and secure in position. Roll tank/engine assembly into place, aligning pivot holes. Bolt with provided hardware. Note: Do not over tighten; this is the vertical/horizontal pivot point.

Tank/Mount Plates

Assembly Figure 1

7.Pivot beam assembly into the horizontal position and lock with pin provided.

8.Hose Assembly: Locate the Pressure Hose, noted by the pipe fittings, and attach it to the lower fitting on the valve. The remaining hose attaches to the top fitting of the valve. Secure with provided hose clamp.

9.Check both the horizontal and vertical positions for any “kinks” in the hoses. Note: Always make sure beam is locked securely into place.

See OPERATING POSITIONS for Horizontal to Vertical Splitting

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LOG Splitter Limited Warranty Table of ContentsPage Page Towing Safety Assembly Instructions OperationCold Weather Start UP Filling the Hydraulic ReservoirStart UP TowingPage Repair Parts Safety Decals OD12 Hydraulic Fill PlugAssembly Detail ModelsService Parts On units with ThrottleItem Number Description Part Number Beam Detail ALL ModelsNot ALL Parts are on ALL Models Engine Detail LS928, LS11534, LS12534D ModelsAssembly Detail Model LS12534D Motor Base Item Number Description Part Number Page Page Page Page Specifications Models LS622 LS67525 LS928 LS11534 LS12534DLOG Splitter

LS12534D, LS11534, LS622, LS67525, LS928 specifications

Swisher has established itself as a leader in outdoor power equipment, and their line of finishing mowers exemplifies quality and versatile mowing solutions. Among the standout models are the LS928, LS622, LS12534D, LS67525, and LS11534, each unique but sharing core features that enhance the user experience.

The Swisher LS928 boasts a robust 28-inch cutting deck, ideal for maneuvering in tight spaces while still achieving a professional-grade finish. Its impressive cutting height adjustment allows operators to set the desired height quickly, making it suitable for various grass types and terrains. Powered by a reliable engine, the LS928 combines performance with durability, ensuring uninterrupted mowing sessions.

Next, the LS622 model features a compact design with a 22-inch cutting deck, perfect for smaller residential lawns. Its lightweight construction enables easy transport and handling, making it an excellent choice for homeowners looking for efficiency without sacrificing power. Additionally, the LS622 prioritizes user comfort with an adjustable handle and ergonomic grip.

The LS12534D model takes mowing efficiency to the next level with its 34-inch cutting deck, which allows for wider coverage in fewer passes. This model is equipped with a dual-blade system, providing a clean-cut finish and excellent grass dispersal. The heavy-duty construction ensures that the mower withstands the rigors of extensive use, making it perfect for both residential and commercial applications.

Meanwhile, the LS67525 offers a more powerful option with features tailored for larger landscapes. Its 48-inch cutting deck and high-performance engine facilitate tackling thick grass and uneven terrain with ease. The LS67525 also includes a cruise-control feature, enabling users to maintain a consistent speed without continually adjusting the throttle, enhancing comfort during long mowing sessions.

Finally, the LS11534 stands out with its innovative design that caters to the professional landscaper. This 34-inch model is equipped with a powerful engine and advanced terrain-tracking technology, allowing for precise navigation around obstacles. Its reinforced deck ensures durability while the user-friendly controls enhance operational ease.

Overall, the Swisher LS928, LS622, LS12534D, LS67525, and LS11534 represent a diverse range of mowing solutions, each tailored to meet different mowing needs. Their shared commitment to durability, performance, and user comfort makes them ideal choices for anyone looking to achieve a manicured lawn with ease.
Top Page Image Contents