MAINTENANCE / SPECIFICATIONS
PRECAUTIONS
1)Please take care in the handling of this precision device. If the unit is dropped or subjected to extreme shock, the calibration may be thrown off. Calibration problems due to abuse, or droppage may affect the warranty.
2)DO NOT expose the
SPECIFICATIONS:
System operating voltage | 120vac +/- 20% @ |
Maximum Switching amperage | |
Overload protection | |
Operating temperature | |
Maximum humidity | 95% RH |
Temperature control range | |
Humidity control range | 20 - 80% RH with a 5% differential |
Adjustable timer repeatability | |
Timer setting accuracy | +/- 10% |
Hydro “ON” timer | 30 seconds to 20 minutes |
Hydro “OFF” timer | 12 minutes to 480 minutes |
+/- 3% monthly | |
CO2 Operating principle | Fuzzy Logic, w / |
CO2 Measurement range | 0 – 5000 PPM CO2 |
CO2 | Minimum 10 minutes (full accuracy) |
CO2 Maximum drift per year | +/- 15 PPM |
CO2 Accuracy @ 77’F | +/- 5% of reading |
CO2 Repeatability | < 1% of Fixed Scale |
CO2 Calibration interval | Three years |
CO2 sensor Operating life expectancy | 15 years typical |
Dimensions | 10” X 8” X 7” |
Weight | Less than 6 lbs. |
Relay operations | Minimum 100,000 electrical / 10,000,000 mechanical |
MAINTENANCE:
1)Consult the troubleshooting chart for a listing of the most common problems.
2)DO NOT open the enclosure!!! There are no components that require maintenance.
3)Do not use this equipment for purposes other than what it is designed for. It will provide many years of
4)In the event you cannot solve the problem, first consult the dealer who sold the unit then contact the factory for instructions on how to return it to the factory for repair.
PUBLISHED BY R & M Supply INC.
COPYRIGHT 2002 BY R & M Supply
ALL RIGHTS RESERVED.
Liability statement:
R & M Supply and their retailers and distributors are not responsible for any damage or injuries (consequential or otherwise) arising from the use of this device. The purchaser assumes all responsibility for the use and proper installation of this device.
Page 11