Xantrex Technology 400, 800 manual Recharging with the AC Charger, To recharge with the AC Charger

Page 23

Using XPower Powerpack for the First Time

Using XPower Powerpack for the First Time

Important: Prior to operating your AC appliance or 12 V DC appliance, ensure that the battery of the XPower Powerpack is fully charged. If the battery has been fully discharged, recharging with the AC Charger may take up to 24 hours.

Recharging with the AC Charger

Note: The XPower Powerpack battery level LEDs are only accurate when the XPower Powerpack has been disconnected from all appliances and all charging sources for fifteen minutes.

Recharging with the AC Charger is a true “plug-in-and- forget” charging method. We recommend leaving the AC Charger connected when the XPower Powerpack is not in use.

To recharge with the AC Charger:

1.Disconnect any 12 V DC appliances and turn the light OFF.

2.Turn the AC Power On/Off Switch to OFF.

3.Plug the AC Charger into a standard AC wall outlet.

4.Insert the AC Charger cable end into the AC Charger Input Socket located under the red boosting clamp (see figure on page 6).

The Battery Status LED changes from red to green when charging is complete (about 24 hours if the battery is completely discharged).

Important: The 24-hour charging time for the XPower Powerpack assumes that there is 120 V AC at the AC wall outlet. If the voltage is less than 120 V AC, it may take more than 24 hours to fully recharge the XPower Powerpack. If, after 24 hours of charging, the Battery Status LED remains red, continue to charge the unit for another 12 hours. The unit will be ready for use even if the Battery Status LED remains red.

11

Page 22 Page 24
Image 23
Page 22 Page 24
Contents XPower Powerpack 200 Plus Date and Revision Organization PurposeAbbreviations and Acronyms Conventions UsedImportant Safety Instructions Important Safety Information Important Safety Information Precautions When Working With Your Vehicle Battery Vii Precautions for Using Rechargeable Appliances Contents Specifications MaintenanceTroubleshooting Overheating About the XPower PowerpackComprehensive Protection Automatic OverloadLow Battery Protection Materials List FeaturesFront Panel Detail XPower Powerpack FeaturesFeature Description Not Left Side View Accessory Description AccessoriesPage Operating Conditions and Guidelines OperationChoosing a Location To recharge with the AC Charger Recharging with the AC ChargerUnderstanding AC Appliances Using the Built-in LightOperating AC Appliances AC Appliance Wattsa Hoursb 1AC Appliances and Run TimesTo operate an AC appliance Operating an AC ApplianceOperating AC Appliances DC Appliance Watts a Hours b Operating 12 V DC AppliancesTo operate a 12 V DC appliance Boosting a Vehicle’s EngineTo boost a vehicle or boat engine Boosting a Vehicle’s Engine Over-temperature Safety Protection Using the Air CompressorTo inflate your vehicle, motorcycle, or bicycle tires Inflating TiresTo inflate small sports equipment Inflating Small Sports EquipmentConnecting to an External Battery Connecting to an External Battery Battery Maintenance MaintenanceRecharging with the AC Charger Recharging the XPower Powerpack BatteryRecharging with the DC Charging Cable Recharging the XPower Powerpack Battery Recharging with a Generator’s Regulated 12 V DC Outlet Recharging from a Solar Panel To wire the coaxial DC connectorTo replace the light bulb RecyclingReplacing the Built-in Light Page Television Interference Common ProblemsBuzz in Audio Equipment Problem Possible Cause Solution Troubleshooting ReferenceTroubleshooting Reference 1Troubleshooting reference OFF 1Troubleshooting reference DC Section Electrical SpecificationsInternal Battery Charging Controller System AC Power SectionPhysical specifications Internal SW12120 battery Physical SpecificationsAccessories Physical specifications XPower PowerpackPage Warranty Warranty and ReturnExclusions DisclaimerProduct Return Procedure Return Material Authorization PolicyInformation About Your System Out of Warranty Service
Related manuals
Manual 2 pages 49.95 Kb

400, 800 specifications

Xantrex Technology is a well-regarded name in the field of power conversion solutions, particularly known for its advanced inverter and charger systems for various applications, including recreational vehicles, marine, and mobile power systems. Three of their popular models are the Xantrex inverter series: the 800, 1500, and 1750. Each model is designed to provide reliable, efficient power in a compact form factor, catering to different power needs.

The Xantrex 800 inverter delivers 800 watts of continuous power, making it suitable for smaller applications such as charging electronic devices, powering lights, or running small appliances. It combines a sine wave output with high-efficiency technology to ensure compatibility with sensitive electronics. One of its main features is an easy-to-use interface, typically including LED indicators, that allows users to monitor power status at a glance.

The Xantrex 1500 inverter ups the ante by offering 1500 watts of continuous power. It is particularly well-suited for larger loads, such as microwave ovens or small refrigerators. This model incorporates advanced power management technology, ensuring better load handling and energy efficiency. The built-in safety features, including over-voltage and over-temperature protection, enhance the reliability of this inverter for longer-term applications.

The Xantrex 1750 inverter is the most powerful among the three, delivering 1750 watts of continuous output. This model is ideal for users who require robust power supply capabilities, such as on extended camping trips or in off-grid scenarios. It features a user-friendly interface with digital displays that provide detailed information on power usage, battery status, and operational conditions. This inverter is designed with advanced technology to maximize efficiency and minimize power loss during operation.

All three models utilize pure sine wave technology, which is crucial for ensuring the safe operation of sensitive electronics. They also include features such as automatic shutdown in the event of excessive heating or other anomalies, ensuring protection for both the inverter and the devices connected to it. Additionally, compact and lightweight design makes these inverters easy to install and transport, making them ideal for a variety of mobile and stationary applications. Whether you require minimal power for small devices or a more robust system for larger loads, Xantrex Technology offers versatile inverter options to meet diverse needs.
Top Page Image Contents