Fuel Safety, Hydraulic Safety | Wright Manufacturing 3234-33

Note: Excessively worn tire tread is dangerous. Replace tire(s) with less than 3/32” of any tread groove left. Use tires with the tread pattern recommended by Wright Mfg., Inc. only. Keep the tire pressure in the drive tires between 18 and 22 psi. Higher pressures will cause the tires to have less traction which may prevent safe operation. Lower pressure will affect the deck pitch, thus creating a level deck or a reverse pitched deck and this WILL compromise cut quality. (Refer to tire maintenance and pressure section)

1.16 Fuel Safety

WARNING

Handle gasoline with care – it is highly flammable. Do not smoke while handling gasoline. Use an approved gasoline container. Never remove the fuel cap or add gasoline to a running or hot engine or an engine that has not been allowed to cool for several minutes after running. Never fill the tank indoors and always clean up spilled gas. NEVER store the equipment with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

1.17 Hydraulic Safety

WARNING

Keep body and hands away from pin holes or fittings that eject hydraulic fluid under high pressure. Use paper or cardboard and not hands to search for leaks. Hydraulic fluid escape under high pressure may have sufficient force to penetrate skin and cause serious injury. If foreign fluid is injected into the skin, it must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result. Seek medical attention immediately. Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before starting your Wright mower. Hydraulic fluid is under high pressure. If you need service on your hydraulic system, please see your authorized Wright dealer.

1.18 Using a Spark Arrester

The engine in this machine is not equipped with a spark arrester muffler. It is in violation of California Public Resources Code Section 4442 to use or operate the engine on or near any forest-covered, brush-covered, or grass covered land unless the exhaust system is equipped with a spark arrester meeting any applicable local or state laws. Other states or federal area may have similar laws.

1.19 Replacement Parts

WARNING

Use of parts other than specified parts supplied by Wright Manufacturing, Inc. may compromise the safe use of the mower, are not recommended and their use could void the warranty. Always check with your Dealer or the Wright Mfg website, www.wrightmfg.com for the Illustrated Parts List for your equipment.

Wright is fully concerned with your safety. Please read the above repeatedly until you fully understand the methods to promote the safest operation possible.

REMEMBER – YOUR MOWER CAN BE ONLY ASSAFE AS THE OPERATOR.

FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN

SERIOUS INJURY OR DEATH.

3234-33, 3228-33 specifications

Wright Manufacturing, a leading name in the production of commercial lawn care equipment, has made a significant mark in the industry with its impressive model range, notably the 3228-33 and 3234-33 mowers. These models are designed for professionals who require reliable performance, durability, and superior maneuverability in various landscape conditions.

The Wright Manufacturing 3228-33 is a stand-on mower that combines compact design with powerful performance. The mower is equipped with a robust 33-inch cutting deck that allows for impressive maneuverability without sacrificing cutting efficiency. This model features a high-quality Kawasaki engine that delivers exceptional power and reliability, ensuring that users can tackle even the most challenging jobs with ease.

One of the standout technologies in the 3228-33 is its patented Wright deck design. This design provides a unique airflow pattern that facilitates superior grass clipping dispersal, enhancing the overall cutting quality. Furthermore, the mower incorporates an intuitive operator control system, allowing users to easily adjust their speed and cutting height for optimal performance in various conditions.

On the other hand, the Wright Manufacturing 3234-33 offers a similar yet amplified experience. This model features a larger 34-inch cutting deck, giving operators the ability to cover more ground efficiently while still maintaining the tight turning radius that Wright mowers are renowned for. The enhanced deck size is complemented by a powerful engine that ensures consistent performance throughout the day, making it ideal for larger properties or commercial applications.

Both models boast a user-friendly design with a comfortable stand-on platform, which minimizes fatigue during extended use. The platform is also equipped with vibration-dampening technology, ensuring a smooth ride over uneven terrain. Additionally, the mowers' heavy-duty construction is designed to withstand rigorous use, featuring a frame that can endure the daily demands of professional landscaping.

In terms of maintenance, both the 3228-33 and 3234-33 are designed for ease of service. Their accessible components make routine check-ups and repairs straightforward, minimizing downtime and keeping the mowers in peak condition.

Overall, Wright Manufacturing’s 3228-33 and 3234-33 models exemplify innovation and performance in commercial mowing. With their advanced features and durable construction, they are ideal options for landscaping professionals looking to enhance efficiency and deliver exceptional results. These models continue to represent Wright Manufacturing's commitment to delivering superior mowing solutions tailored for the landscape industry.