Xantrex Technology 200 manual Recharging with the AC Charger, To recharge with the AC Charger

Page 49

Recharging the XPower Powerpack Battery

Recharging with the AC Charger

Recharging with the AC Charger is a true “plug-in-and- forget” charging method.

CAUTION

Do not operate AC or DC appliances while the XPower Powerpack is being recharged with the AC Charger.

The AC Charger may be permanently damaged if AC appliances or 12 V DC appliances are operated while the AC Charger is connected.

To recharge with the AC Charger:

1.Disconnect any 12 V DC appliance and turn the light switch to Off.

2.Turn the AC Outlet On/Off switch to Off.

3.Plug the AC Charger into a standard AC wall outlet.

4.Insert the AC Charger cable end into the Charger Input Socket located in the charger storage compartment.

5.While the XPower Powerpack is recharging, the green Charging Status light is flashing. If the battery is completely discharged, a typical recharge may take up to 35 hours. When fully charged, the green Charging Status light changes to steady and the XPower Powerpack is ready to use.

Important: The 35-hour charging time for the XPower Powerpack assumes that there is 120 V at the AC wall outlet. If the voltage is less than 120 V AC, it may take more than 35 hours to fully recharge the XPower Powerpack. If, after 35 hours of charging, the green Charging Status light is still flashing and not steady, continue to charge the unit for another 15 hours.

975-0057-01-01

4-3

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Owner’s Guide Date and Revision Conventions Used PurposeRelated Information References to XPower PowerpackImportant Safety Instructions Important Safety Instructions 975-0057-01-01 Powerpack 400 Plus Precautions When Working With Batteries Viii Precautions for Using Rechargeable Appliances Page Contents Operation MaintenanceSpecifications TroubleshootingWarranty and Product Information Xiv Comprehensive Protection IntroductionAutomatic overload OverheatingJump-Start Cables Safety Feature Low Battery ProtectionMaterials List FeaturesFront Panel Detail Feature DescriptionNot Required How to Condition Required ActionCharging Status Air Compressor XPower Powerpack 400 Plus only Left Side View Light On/Off SwitchStorage Compartment Detachable heavy-duty jump-start cables AccessoriesOperating Conditions and Guidelines OperationChoosing a Location Dry Cool Ventilated Safe Protected from battery gasesTo recharge with the AC Charger Recharging with the AC ChargerOperating AC Appliances Using the lightUnderstanding AC Appliances AC Appliance Watts a Hours b Run Time on Typical AC AppliancesHigh Surge Appliances To operate an AC appliance Operating an AC ApplianceOperating 12 V DC Appliances DC Appliance Watts a Hours b To operate a 12 V DC applianceJump-Starting a Vehicle’s Engine To jump-start a vehicle or boat engine Powerpack 400 Plus Using the Air Compressor XPowerOver-Temperature Safety Protection Tires Inflating TiresBicycle Tires Other InflatablesTo inflate your vehicle, motorcycle, or bicycle tires Inflating Small Sports EquipmentTo inflate small sports equipment Connecting to an External Battery 975-0057-01-01 975-0057-01-01 Page Battery Maintenance MaintenanceFunction button Recharging the XPower Powerpack BatteryRecharging with the AC Charger Hazard Recharging with the DC Charging Cable975-0057-01-01 975-0057-01-01 Battery Life Replacing the Internal BatteryRecharging From a Solar Panel To recharge with a solar panelReplacing the Battery Hazard Obtaining a Replacement BatteryReplacement Battery Where to Buy To replace the battery 975-0057-01-01 Replacing the External Fuse Replacing the Incandescent LightPage Common Problems TroubleshootingBuzz in Audio Equipment Television InterferenceProblem Possible Cause Solution Troubleshooting Reference1Troubleshooting reference Charging XPower XPower Powerpack Recharge the XPower Powerpack Electrical Specifications SpecificationsDC Section Internal Battery Charging Controller System AC Power SectionAccessories Physical SpecificationsPhysical specifications Page Warranty and Product Information Warranty Page Product DisclaimerExclusions Return Material Authorization Policy Return Procedure Out of Warranty Service Purchased From Purchase Date Information About Your System

200 specifications

Xantrex Technology 200 is a versatile inverter designed to meet the power needs of both recreational and residential applications. As part of the Xantrex family, known for their innovative energy solutions, the Xantrex Technology 200 inverter stands out for its reliability and efficiency.

One of its main features is the pure sine wave output, which ensures that sensitive electronic devices operate smoothly without the risk of damage. This is particularly important for applications such as running computers, medical equipment, and audio/visual devices that require clean, reliable power. With a continuous output power rating of 200 watts, this inverter is suitable for smaller loads and can effectively support a variety of devices including laptops, televisions, and lights.

In terms of technology, the Xantrex Technology 200 incorporates advanced digital signal processing. This technology enhances the inverter's performance by optimizing efficiency and providing better load handling capabilities. It also features built-in overload protection, which safeguards the system from potential damage caused by excessive current draw. This makes it not only user-friendly but also safe to operate in various conditions.

The inverter is designed with a compact form factor, making it easy to install in tight spaces, whether in a vehicle or as part of a home energy system. Additionally, it includes an integrated cooling system that prevents overheating during extended use, which is essential for maintaining performance and extending the life of the unit.

Another standout characteristic is its low idle consumption, which helps conserve battery life when the inverter is not in active use. This feature is particularly beneficial for off-grid solar applications, where every watt of power can make a significant difference in overall energy management.

With user-friendly interfaces and LED indicators, the Xantrex Technology 200 provides easy monitoring of power output and operational status, facilitating a stress-free user experience. The combination of these features positions the Xantrex Technology 200 as an ideal choice for adventurers, homeowners, and anyone needing reliable portable power solutions. Whether for leisure activities or energy independence, this inverter showcases Xantrex's commitment to quality and innovation in energy technology.
Top Page Image Contents