Yard Machines 390 manual Important Safe Operation Practices, General Operation

Page 3

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

This Symbol Points Out Important Safety Instructions Which, If Not Followed, Could Endanger The Personal Safety And/or Property Of Yourself And Others. Read And Follow All Instructions In This Manual Before Attempting To Operate Your Tiller. Failure To Comply With These Instructions May Result In Personal Injury. When You See This Symbol— Heed Its Warning.

DANGER: Your tiller was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This tiller is capable of amputating hands and feet. Failure to observe the following safety instructions could result in serious injury or death.

WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

GENERAL OPERATION

•Read this operator’s manual carefully in its entirety before attempting to assemble this machine. Read, understand, and follow all instructions on the machine and in the manual(s) before operation. Be completely familiar with the controls and the proper use of the machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

•Your tiller is a powerful tool, not a plaything. Therefore, exercise extreme caution at all times. Your unit has been designed to perform one job: to till soil. Do not use it for any other purpose.

•Never allow children under age 14 to operate the unit. Children 14 years and older should only operate the unit under close parental supervision. Only responsible individuals who are familiar with these rules of safe operation should be allowed to use your unit.

•Do not operate tiller while under the influence of alcohol or drugs.

•Keep the area of operation clear of all persons, particularly small children and pets. Stop the engine when they are in the vicinity of your tiller.

•Wear sturdy, rough-soled work shoes and close fitting slacks and shirt. Shirt and slacks that cover the arms and legs and steel-toed shoes are recommended. Do not wear loose fitting clothes or jewelry and secure hair so it is above shoulder length. They can be caught in moving parts. Never operate a unit in bare feet, sandals or sneakers.

•Operate tiller only in daylight or good artificial light.

•Do not start tiller unless the shift lever (if provided) is in the neutral (N) position.

•Do not allow anyone to stand or walk in front of tiller when starting or running engine.

•Do not place feet or hands on or near the tines when starting the engine or while the engine is running.

•Never attempt to make depth bar, tine width, cable, handle, or wheel adjustments while the engine is running.

•Do not leave the tiller unattended with the engine running.

•Before attempting to remove rocks, bricks and other objects from tines, stop the engine and be sure the tines have stopped completely. Disconnect the spark plug wire and move it away from the spark plug.

•If your machine should start making an unusual noise or vibration, immediately stop the engine and allow the machine to come to a complete stop. Disconnect the spark plug wire and move it away from the spark plug. Take the following steps:

•Inspect for damage.

•Repair or replace any damaged parts.

•Check for any loose parts and tighten to assure continued safe operation.

•Muffler and engine become hot and can cause a burn. Do not touch.

•Keep all shields, guards and safety devices in place and operating properly.

•Use caution when tilling near fences, buildings and underground utilities. Rotating tines can cause damage or injury.

•Do not operate engine if air cleaner or cover over carburetor air intake is removed, except for adjustment. Removal of such parts could create a fire hazard.

•Only use accessories approved for this machine by the manufacturer. Read, understand, and follow all instructions provided with the approved accessory.

•If situations occur which are not covered by this manual, use care and good judgment. Contact your dealer for assistance.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesChildren Removing Unit From Carton Setting Up Your TillerAttaching The Handle Assembly Assembling Your TillerAttaching Clutch Control Cables Forward Cable Models 340 thru Final Clutch AdjustmentKnow Your Tiller Throttle ControlOperating Your Tiller Gas and Oil Fill upStarting Engine Wheel Position Using Your TillerTo Stop Engine Models 343Controlling Speed And Tilling Depth Depth Stake AdjustmentCultivating Transporting The TillerDepth Stake Adjustment Clutch Control AdjustmentsTine Width Adjustment Wheel AdjustmentsMaintaining Your Tiller Forward Drive Belt See Figure OFF-SEASON StorageTrouble Possible Causes Corrective Action Trouble Shooting GuideModel 340 Thru Part Description 255 Model 340 Thru Model Description 252624 Model MANUFACTURER’S Limited Warranty for

390 specifications

The Yard Machines 390 is a robust and versatile lawn mower designed to meet the demands of both residential and commercial users. With its powerful features and advanced technologies, the Yard Machines 390 delivers exceptional performance, making lawn care an easier and more efficient task.

At the heart of the Yard Machines 390 is a reliable engine. The 390cc engine provides ample power to tackle even the toughest mowing jobs. This engine is engineered for optimal performance, ensuring a smooth and consistent cut across various grass types. Its efficient fuel consumption not only extends the operation time but also reduces the frequency of refueling.

One of the standout features of the Yard Machines 390 is its cutting deck. The 21-inch cutting deck is crafted from durable materials, allowing for longevity and resilience against wear and tear. The deck is designed for superior airflow, ensuring a clean and even cut every time. Additionally, the mower offers multiple cutting height positions, allowing users to customize their mowing height according to their preference and the type of grass being cut.

The Yard Machines 390 is equipped with a self-propelled drive system, which significantly reduces the effort required by the user. This feature is particularly beneficial on hilly terrain or uneven surfaces, providing enhanced maneuverability and control. The adjustable speed settings further allow users to tailor the mowing pace to their comfort level.

An additional characteristic of the Yard Machines 390 is its ease of maintenance. The mower is designed for simple access to vital components, making routine maintenance tasks such as oil changes and blade sharpening straightforward and hassle-free. The machine's durable construction also contributes to its reliability and reduces the need for frequent repairs.

Moreover, the Yard Machines 390 incorporates safety features to protect users during operation. The operator presence control ensures that the engine stops immediately if the user loses control of the mower, minimizing the risk of accidents.

In summary, the Yard Machines 390 is a powerful, efficient, and user-friendly lawn mower that combines advanced technology with practical features. Its robust engine, versatile cutting deck, self-propelled drive, and safety measures make it an excellent choice for anyone looking to maintain a pristine lawn with minimal effort. Whether you are a homeowner or a professional landscaper, the Yard Machines 390 is designed to deliver exceptional results.
Top Page Image Contents