Yazoo/Kees ZKH52221, ZKH61251 manual Adjustments Park Brake, Cutting Height, Mower Deck Leveling

Page 6

ADJUSTMENTS

PARK BRAKE:

1.Stop engine and remove key. Release park brake and measure the length of the spring. The distance between the washers on each end of the spring should be 2-7/8" (See Fig 2 ).

2.If adjustment is needed, loosen the nut below the spring. Then rotate nut to desired position so the proper distance between the washers is obtained. Check other side for proper adjust- ment.

3.Engage the brake lever and measure the distance between the trunnion pin and the collar welded to the brake rod. Distance should be 3/16" to 1/4" (See Fig 2 ).

4.If adjustment is needed, loosen the lock nut directly below the yoke. Using a wrench, rotate the rod by turning the double nuts using the nuts below the yoke and the nut you just loosened, to obtain the 3/16" to 1/4" distance. Tighten nut against yoke and check other side for proper adjustment.

FIGURE 2

CUTTING HEIGHT:

1.Stop the mower and disengage the blades.

2.Raise the deck height lever to the transport position.

3.Remove the height adjustment pin and place it in the desired cutting height hole. Move deck height lever down onto the pin and mow. NOTE: anti-scalp rollers must be in the proper position for maximum deck floatation. See the decal on the front deck.

MOWER DECK LEVELING:

1.Position mower on a flat surface and stop engine.

2.Check the tire pressure of all four tires. Inflation should be 15 psi.

3.Place two 2x4’s on edge under the cutting deck from front to rear and lower the deck down onto the 2x4’s.

4.Adjust the four upper chain bolts to the center of the slot in the deck lift arms. NOTE: make sure deck lift blocks are tightly bolted to the frame (See Fig 3).

5.Return the deck height lever to the transport position (5" cutting height) and check the center to center distance of the swivels. Distance should be 19-1/2"

6.Check the distance between the washers on the deck lift springs. Distance should be

11-3/4" (See Fig 3).

7.Check chains for equal tension. If unequal, adjust upper chain bolt in slot.

8.Place deck in the 5" cutting height and measure from the cutting edge of the blade to a flat surface to check deck cutting height.

PRINTED IN USA

6

MANUAL NO. 102936IR

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Commercial Mowers Manual no IR Maintenance Table of Contents SafetySetup and Adjustments Specifications Trouble ShootingSafety Training PreparationOperation Safety Transportation Equipment Setup and AdjustmentsAdjustments Park Brake Cutting HeightMower Deck Leveling Adjustments Mule Drive Belt Tension Reverse Spring Detent AdjustmentThrottle Lever Tension Manual no IR Adjustments Motion Control Linkage Adjustment Operating Instructions ControlsOperating Instructions Startingand Operation Manual no IR Manual no IR Manual no IR Problem Possible Causes Wiring Diagram Service Record Manual no IR Revised For Greasable Cutter HSG Maintenance

ZKH52251, ZKH52221, ZKH61221, ZKH61251 specifications

The Yazoo/Kees ZKH52221, ZKH52251, ZKH61251, and ZKH61221 models are part of an advanced line of zero-turn mowers renowned for their reliability, performance, and cutting-edge technology. Designed for both commercial and residential use, these mowers excel in providing an efficient and comfortable mowing experience.

At the core of these models is the powerful engine configuration. The ZKH52221 and ZKH52251 feature robust engines that deliver efficient fuel consumption while providing high torque, enabling them to tackle even the thickest grass with ease. The ZKH61251 and ZKH61221, on the other hand, come with enhanced horsepower, making them ideal for more demanding applications and larger areas.

One of the standout characteristics of all four models is their zero-turn capability, which allows for unmatched maneuverability. The dual-lever steering system offers precision control, enabling operators to navigate around trees, flower beds, and other obstacles effortlessly. This design reduces the time required for trimming edges and provides a neater finish to lawns.

The cutting decks on these mowers are engineered for performance, with various widths available to accommodate both small and large mowing areas. With a premium design featuring durable materials, these decks ensure a clean and even cut with every pass. Height adjustments are easy to make, allowing operators to achieve their desired mowing height quickly and efficiently.

Comfort is prioritized in the design of these models. The ergonomic seating, plush cushioning, and adjustable armrests provide a comfortable experience even during extended mowing sessions. Additionally, vibration-reduction technology minimizes fatigue, making the mowing task more enjoyable.

Safety is also a significant focus in the Yazoo/Kees line. Each model is equipped with features such as a seatbelt system, automatic shutdown when the operator leaves the seat, and an easily accessible emergency stop switch. These safety measures give operators peace of mind while working.

In summary, the Yazoo/Kees ZKH52221, ZKH52251, ZKH61251, and ZKH61221 models represent a blend of power, precision, and comfort. With their advanced engines, exceptional maneuverability, durable cutting decks, and focus on operator safety, these zero-turn mowers are well-suited to meet the diverse needs of lawn care professionals and homeowners alike, ensuring a well-maintained lawn with every mowing session.
Top Page Image Contents