NHT HDP-2 owner manual „ Wall Mount Bracket, Parts List per speaker, Tools you will need

Page 3

fig. 1

fig. 2

Experimentation is the key to finding the best arrangement in your listening environment. Be patient, have fun, and remember that small changes in speaker position can sometimes have a significant effect on the sound. In addition, room furnishings play an important role in absorbing and reflecting soundwaves. Midrange and high frequencies in particular will be absorbed by soft furnishings such as sofas, carpets and curtains. A large number of these soft furnishings will dull the sound, while a “live” room with few furnishings will brighten the sound. If you are willing to spend some time fine-tuning the performance of your system, you will enjoy the benefits for years to come.

„Wall Mount Bracket

Parts List (per speaker):

2 screws (#10 x 2” pan head)

4 foam isolation pads

1 template (included with owner’s manual)

Tools you will need:

power drill with 1/8-inch bit

Philips screwdriver or power screwdriver

studfinder

level

Note: Whenever an object is affixed to a wall, you must take special care to mount it securely, to prevent it from falling and causing possible injury. THE HDP-2 MOUNTING BRACKET MUST BE ATTACHED TO STUDS, AS DRYWALL (SHEETROCK) ALONE CANNOT PROVIDE ADEQUATE SUPPORT. Make sure that the mounting bracket will not interfere with electrical wiring, plumbing, etc. IF YOU ARE UNSURE ABOUT THE INSTALLATION OF THIS MOUNTING BRACKET, CONSULT A PROFESSION- AL CONTRACTOR. Follow the mounting instructions carefully to ensure proper installation.

1.Begin by selecting the desired area on the wall where the HDP-2 will be mounted, preferably at a minimum height of 6 feet. Using a studfind- er (or the old-fashioned “knocking” method), locate two adjacent studs, spaced 16 inches apart.

2.Using the supplied mounting template, mark the two screw locations, 16 inches apart and centered on the studs (Fig. 2). Use the level to ensure that the screw locations are lined up precisely.

3.Drill a 1/8-inch pilot hole into the wall for each screw. Be sure that the hole passes through the drywall and into the stud. If the hole does not reach a stud, re-position the screws and pilot holes until it does.

4.Insert one screw into each pilot hole. Screw all the way into the wall, until the screw head rests on the wall surface.

5.Loosen the screw 1 to 2 turns, so the bracket is able to slide down and the screw head will rest in the narrow section of the keyhole. The wall screws are now properly set.

6.Attach the four foam isolation pads to the back corners of the HDP-2 by peeling the backing paper and adhering them to the speaker surface (Fig. 3). These will prevent audible vibrations of the HDP-2 against the wall surface.

7.Attach speaker cable to the HDP-2. When possible in new construction applications, run the cable inside the wall and have it come out direct- ly behind the location of the HDP-2. If this is not possible, simply run the cable along the wall behind the HDP-2. The speaker cable must be a maximum of 1/4-inch thickness to fit betwen the wall and the HDP-2..

8.Hold up the HDP-2 so that the top keyholes are aligned with the wall screws (Fig. 4). The other keyholes are not used for this product. Carefully place the brackets over the screws so that the screw heads slide into the round sections of the keyholes. Slowly move the HDP-2 downward until the bracket has locked over the screw. Ensure that both brackets are securely mounted to their screws.

3

Image 3
Contents HDP-2 NHT-9993 HDP-2 Specifications„ Placement „ DesignParts List per speaker „ Wall Mount BracketTools you will need „ Maintenance „ Connections„ Operation Limited Warranty Valid Only in the U.S.A Warranty Period What’s Not CoveredTo Obtain Service

HDP-2 specifications

The NHT HDP-2 is an exceptional high-performance digital-to-analog converter (DAC) and headphone amplifier, designed to elevate audio experiences for music enthusiasts. With its sleek design and advanced technologies, the HDP-2 represents a perfect blend of form and function, appealing to both casual listeners and audiophiles.

One of the standout features of the NHT HDP-2 is its high-resolution DAC, which supports various sampling rates up to 24-bit/192 kHz. This capability ensures that users can enjoy their music with remarkable clarity and detail, capturing the nuances of the original recordings. The HDP-2 is equipped with multiple input options, including USB, coaxial, optical, and analog inputs. This versatility allows users to connect a wide range of audio sources, from computers and streaming devices to turntables.

Another key characteristic of the HDP-2 is its high-quality headphone amplification. The built-in headphone amp is designed to drive a variety of headphones, from low-impedance models to high-impedance audiophile favorites. With its powerful output, the HDP-2 provides ample headroom, ensuring dynamic and distortion-free sound reproduction even at higher volumes.

The NHT HDP-2 is also engineered with a unique digital volume control, which enhances the listening experience by maintaining optimal signal integrity. This feature allows users to make precise adjustments to volume levels without compromising audio quality. Additionally, the unit features a robust analog output stage, providing balanced and unbalanced outputs to connect to external amplifiers or powered speakers.

For those concerned with connectivity, the HDP-2 supports asynchronous USB audio, which eliminates jitter for optimal sound quality when streaming from a computer. The device is compatible with both Windows and macOS operating systems, making it an ideal choice for users across different platforms.

In terms of build quality, the NHT HDP-2 features a solid chassis that minimizes interference and vibration, ensuring a stable performance. The device's aesthetic appeal is complemented by an easy-to-read front panel display that provides important information about the current audio settings.

Overall, the NHT HDP-2 is a remarkable piece of audio technology that combines advanced digital processing with high-quality amplification. Whether for casual listening or serious audio pursuits, the HDP-2 delivers an unparalleled listening experience that is sure to satisfy even the most discerning music lovers. Its comprehensive features and exceptional sound quality make it a standout choice in the realm of DACs and headphone amplifiers.