Yazoo/Kees ZVKH61303, ZVKW52253, ZVKH72303, ZVKH61273 manual Maintenance

Page 13

SAFETY INSTRUCTIONS

Maintenance

WARNING!

The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

Use only approved gasoline container.

Never remove gas cap or add fuel with the engine running. Allow engine to cool at least two (2) minutes before refueling.

Never fuel the machine indoors.

Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliances.

Before you begin refueling, minimize the risk of static electricity by touching a metal surface.

Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when filling.

Remove gas-powered equipment from the truck or tailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

If fuel is spilled on clothing, change clothing immediately.

Never overfill fuel tank. Replace gas cap and tighten securely.

Do not start the engine near spilled fuel.

Never use gasoline as a cleaning agent.

If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

8011-516

Never fill the fuel tank indoors

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling

English-11

Image 13
Contents Operator Manual Page OPERATOR’S Manual Rider MAX 2 Series ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Passengers Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Roll over Protection system RopsControls ControlsControl Locations Motion Control Levers Tracking knob Hour MeterParking Brake Ignition Switch Blade switchFuses Refueling Seat Locking DeviceFuel Shut Off Valve Seat Adjustment LeverChoke Control Lifting Lever for the Mower Deck Throttle ControlCutting height pedal AccessoriesPump release valves Operation OperationTraining Before Starting Roll bar and safety beltStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand No adjustments or Maintenance to be carried out UnlessEngine stopped Ignition key has been removed Parking brake is onMaintenance MaintenanceMaintenance Schedule = Described in this manual  = Not described in this manual To clean battery and terminals BatteryReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Safety system Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Air filter maintenance Air filter indicator optional Filter replacementChecking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Faulty adjustment can cause an accidentChecking the Parking Brake Checking the V-beltsPump belt Checking the BladesRemove blade bolt by turning counterclockwise Adjusting Cutting Height Adjusting the Mower DeckEngine oil cooler To adjust anti-scalp rollersUse protective glasses when cleaning and washing Cleaning and WashingCaster Wheels HardwareLubrication LubricationLubrication Schedule Shaft Bushings and Linkage Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil, Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsEngine Oil, Kawasaki Engine Changing the Engine Oil Front Wheel Mount Throttle and Choke Cables, Lever BearingsFront Wheel Bearings Mower Deck Height AdjusterDeck belt pulleys Mower Deck Struts Steering Control Shafts Tip the driver’s seatChanging the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause Wrong fuel type English-63 Storage ServiceStorage Winter StorageTechnical Data Technical DataZVKW52253 ZVKH61273 Productivity ZVKH61303 ZVKH72303 Productivity Acres/h/20655 m2/h Acres/h/24300 m2/h Torque Specifications AccessoriesConformity Certificates Conformity CertificatesUSA requirements Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 8 Hours Action Hour ServiceEnglish-74 English-75 English-76 At Least Once Each Year English-78 Service Journal Service Journal Page 539 131260 IR 07/07
Related manuals
Manual 84 pages 12.78 Kb Manual 30 pages 55.39 Kb

ZVKH61273, ZVKH72303, ZVKH61303, ZVKW52253 specifications

Yazoo/Kees is a well-established brand in the field of lawn care and landscaping equipment, known for its robust and efficient mowers. Among its lineup, the models ZVKH61303, ZVKH61303, ZVKW52253, ZVHO61243, ZVKH61273, and ZVKH72303 stand out due to their advanced features and innovative technologies.

The ZVKH61303 model is designed with a powerful engine that provides optimal performance in various terrains. Its cutting deck delivers a precise and clean cut, ensuring a manicured lawn. One of its key features is the zero-turn steering capability, allowing for greater maneuverability around obstacles, making it ideal for residential and commercial use alike.

The ZVKW52253 is another noteworthy model that emphasizes efficiency and durability. It features a heavy-duty frame and a reliable cutting system that can handle thick grass and uneven ground. This model is particularly designed for those who need a rugged machine that can operate for extended periods without frequent maintenance.

The ZVHO61243 is tailored for users seeking comfort alongside performance. It includes ergonomic seating and easy-to-reach controls, which enhance user experience during long mowing sessions. The model also features advanced technology in its engine management system, optimizing fuel efficiency and reducing emissions.

For those needing versatility, the ZVKH61273 offers a range of attachments, allowing users to switch between mowing, mulching, and bagging as needed. This model's adaptability makes it suitable for various landscaping tasks, maximizing its utility throughout the year.

The ZVKH72303 rounds out this line with its premium build and cutting-edge technology. It incorporates a smart control system, offering users a digital dashboard for monitoring performance and maintenance needs. Its larger cutting deck and increased engine power facilitate quicker mowing, making it an excellent choice for large properties.

Together, these Yazoo/Kees models reflect the brand's commitment to quality and innovation. With their focus on performance, comfort, and adaptability, these mowers provide users with the tools they need to achieve their landscaping goals efficiently. Whether for residential lawns or expansive commercial properties, Yazoo/Kees continues to offer reliable solutions that stand the test of time.