Yazoo/Kees KKW32121, KKW36121, KW36141, KW48141, KKH48151 guide

OPERATINGINSTRUCTIONS

BEFOREOPERATING

Be thoroughly familiar with all controls and how to use them before operating the mower. Know beforehand how to stop the engine, drive wheels, and mower blades in preparation for possible emergency.

EMERGENCYSTOP

Pull both traction levers firmly against handle grips and hold them securely in place. Use thumb latches to lock both traction levers in neutral position, then stop engine by pulling throttle control back to the off position. See figure # 7

PRE-STARTCHECKLIST

Make the following checks and perform the services as required before each start up.

1.If required make cutting height adjustments and drive linkage adjustments. Refer to pages 5 and 6

2.Checktiresforproperinflation(frontcastertirepressure to be 50 lbs max. / rear tire pressure to be 14 lbs max.

3.Check guards, deflectors, and covers to make sure all are in place and secure.

O.P. LEVER	THUMB LATCH
	THUMB LATCH
HANDLE
	POINT
THUMB LATCH
NEUTRAL POSITION
TRACTION LEVER

Figure 7

NORMALOPERATINGSTOP

1.Pull both traction levers firmly toward the handle grips to stop forward motion.

2.Use thumb latches to lock traction levers in the neutral position.

3.Move the throttle control to the slow position.

4.Move blade engagement lever to the off position.

5.Move shift lever to the neutral position.

6.Stop engine by pulling throttle control lever all the way back to the off position.

NOTE

CLOSE FUEL VALVE AT THE END OF

EACH MOWING JOB !!

4.Check blade belts for wear and correct tension if worn or damaged, replace with original part.

5.Clean interior and exterior surfaces of the cutting deck and clean engine of any accumulation of dirt or debris. Keep engine air intake clear at all times.

6.Check engine oil add if needed (do not overfill) refer to engine manual for oil specs.

7.Add fuel to tank after pushing the mower outside where fumes can dissipate. Make sure cap is tight after refueling.

NOTE

DO NOT ADD FUEL WHILE ENGINE IS RUNNING OR WHILE ENGINE IS HOT.

NOTE

USE FRESH, CLEAN, LEAD FREE GASOLINE. DO NOT USE GASOLINE THAT HAS BEEN STORED FOR LONG PERIODS. LEADED GASOLINE OR GASOHOL IS NOT RECOMMENDED.

STARTINGANDOPERATING ENGINE:STARTENGINEASFOLLOWS:

1.Move blade engagement lever to the off position so the interlock will allow engine to start.

2.Check gear shifter to be sure it is in the neutral position.

3.While on level terrain, lock both traction levers into the neutral position.

4.Open fuel shut-off valve

5.Set throttle control all the way forward to the choke position.

KKW32121, KKW36121, KW36141, KW48141, KKH48151, KKW32121, KKW36121, KKW36141, KKW48141, KKH48151 specifications

The Yazoo/Kees KKW series of commercial mowers, including models KKW32121, KKW36121, KKW36141, KKW48141, and KKH48151, exemplify cutting-edge technology and robust design, making them a preferred choice for landscaping professionals and facilities management teams. These mowers are engineered to tackle a variety of turf conditions, offering reliable performance and ease of use.

One of the standout features of the KKW series is the powerful engine configuration. Each model is equipped with a high-performance engine, specifically designed for maximum torque and durability. This ensures that mowing tasks can be completed quickly and efficiently, even in challenging environments. The KKW series delivers the power needed to handle dense grass and tough terrain, providing excellent cutting performance without sacrificing speed.

The cutting decks are another integral characteristic of these mowers. Each model comes with a high-capacity mowing deck, optimized for superior grass clipping management. The decks are designed to provide an even cut, leaving a clean finish while minimizing the time spent on clean-up. The wider decks available in the KKW48141 and KKH48151 models allow for increased coverage, making them ideal for larger commercial properties or frequent mowing requirements.

In terms of maneuverability, the KKW series features a compact design that allows operators to navigate tight spaces and complex landscapes with ease. The responsive steering and stable chassis ensure that users can make precise turns around obstacles, enhancing overall productivity. Comfort is also a key focus; the ergonomic seating and user-friendly controls make for a more enjoyable mowing experience, reducing operator fatigue over extended periods.

Technology integration is another hallmark of the Yazoo/Kees KKW series. These mowers often feature digital displays that provide real-time feedback on performance metrics, including fuel efficiency and service reminders. This helps users maintain equipment and optimize their mowing schedules, ensuring that machines are always operating at peak performance.

Overall, the Yazoo/Kees KKW32121, KKW36121, KKW36141, KKW48141, and KKH48151 models combine power, versatility, and innovative technology to meet the demanding needs of modern landscaping professionals. With their exceptional build quality and advanced features, these mowers are tailored for those who seek reliability and efficiency in their turf management endeavors.