Yazoo/Kees ZVKH61303, ZVKW52253, ZVHO61243, ZVKH61273, ZVKH72303 manual Operating Instructions

Page 19

OPERATING INSTRUCTIONS

Operating instructions

Roll Bar and Seat Belt

Operate the unit with the roll bar in the raised and locked position and use seat belt. There is no rollover protection when the roll bar is down. If it is necessary to lower roll bar do not wear the seat belt. Raise the roll bar as soon as clearance per- mits.

Starting and operation

Operator must be sitting in the seat. Engage the park brake, blades disengaged and the motion control levers in the neutral slots.

Set choke (if needed) turn key and release as soon as engine starts. Adjust throttle to half and shut choke off.

Release parking brake.

Close motion control levers.

Engage blades and set RPM to maximum. CAU- TION: Be sure all persons are clear of the area before engaging blades.

CONTROLS

Be familiar with all controls their function and how to operate them before starting the machine.

Motion Control Levers

Motion control levers on each side of the console control the direction of movement. The left lever controls the flow of oil from the left hydro pump to the left wheel motor. The right lever controls the flow of oil from the right hydro pump to the right wheel motor.

NOTE: To begin motion the operator must be in the seat and the parking brake disengaged before the motion control levers can be moved from the neutral slots or the engine will kill. FIG - 7

 

Neutral Slot

Forward

Neutral Lock

 

Neutral

Front of

 

Mower

 

Reverse

Motion Control Lever Pattern

(Right Side)

FIG - 7

19

By moving the levers an equal amount forward or back the machine will move in a straight line in that direction. FIG - 7

Movement of either lever forward will cause the right or left wheel to rotate in a forward direction. To stop movement pull both levers into the neutral position.

To turn right while moving in a forward direction pull the right lever back towards the neutral posi- tion, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn left while moving in a forward direction pull the left lever back towards the neutral position, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn pull one lever back beyond neutral while holding the other slightly ahead of neutral. NOTE: The direction of the zero turn will be deter- mined by which lever is pulled back beyond neu- tral. Thus left lever back, left zero turn and oppo- site for right zero turn. Use extra care when us- ing this maneuver the machine can spin very rapidly if one lever is positioned to far ahead of the other.

Blade Switch

Blade engagement switch located on the console is engaged by pulling up on the switch and pushed down to disengage. FIG - 8

Choke Control

Choke control is located on the console. To choke engine pull knob push to release. FIG - 8

Throttle Control

Throttle control is located on the console. Used to control engine RPM. FIG - 8

Parking Brake

Parking brake is located on the left side of the machine and directly in front of the fuel tank. Pull the lever back to engage the brake and push lever forward to release the brake.

Image 19
Contents Manual no REV. IR 10/01/05 Operators manual ModelsYazoo/Kees Power Equipment. All Rights Reserved Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemPresentation PresentationRops Assembly Roll Over Protection System Setup and AdjustmentsTires Engine Oil AdjustmentsSeat Install Control ArmsFrom rotating tires Motion Control Linkage AdjustmentMower Deck Leveling Throttle Lever TensionPark Brake Adjustment Operating instructions Operating InstructionsFuel Shut Off Key SwitchHour Meter Pump Release ValvesMower blades MaintenanceSafety interlock system Cutter HousingsDeck belt HardwareAir filter Hydraulic systemCaster Wheels Pump beltLubrication Tire pressureTorque Specifications Maintenance Schedule Problem Possible Causes Trouble ShootingPage Wiring Diagrams Wiring Diagrams
Related manuals
Manual 84 pages 62.74 Kb

ZVKH61303, ZVKW52253, ZVHO61243, ZVKH61273, ZVKH72303, ZVKH61303 specifications

Yazoo/Kees is a well-established brand in the field of lawn care and landscaping equipment, known for its robust and efficient mowers. Among its lineup, the models ZVKH61303, ZVKH61303, ZVKW52253, ZVHO61243, ZVKH61273, and ZVKH72303 stand out due to their advanced features and innovative technologies.

The ZVKH61303 model is designed with a powerful engine that provides optimal performance in various terrains. Its cutting deck delivers a precise and clean cut, ensuring a manicured lawn. One of its key features is the zero-turn steering capability, allowing for greater maneuverability around obstacles, making it ideal for residential and commercial use alike.

The ZVKW52253 is another noteworthy model that emphasizes efficiency and durability. It features a heavy-duty frame and a reliable cutting system that can handle thick grass and uneven ground. This model is particularly designed for those who need a rugged machine that can operate for extended periods without frequent maintenance.

The ZVHO61243 is tailored for users seeking comfort alongside performance. It includes ergonomic seating and easy-to-reach controls, which enhance user experience during long mowing sessions. The model also features advanced technology in its engine management system, optimizing fuel efficiency and reducing emissions.

For those needing versatility, the ZVKH61273 offers a range of attachments, allowing users to switch between mowing, mulching, and bagging as needed. This model's adaptability makes it suitable for various landscaping tasks, maximizing its utility throughout the year.

The ZVKH72303 rounds out this line with its premium build and cutting-edge technology. It incorporates a smart control system, offering users a digital dashboard for monitoring performance and maintenance needs. Its larger cutting deck and increased engine power facilitate quicker mowing, making it an excellent choice for large properties.

Together, these Yazoo/Kees models reflect the brand's commitment to quality and innovation. With their focus on performance, comfort, and adaptability, these mowers provide users with the tools they need to achieve their landscaping goals efficiently. Whether for residential lawns or expansive commercial properties, Yazoo/Kees continues to offer reliable solutions that stand the test of time.