Yazoo/Kees ZMKW 6124, ZMKW 5222 manual Safety Instructions, General Operation

Page 9

SAFETY

Safety Instructions

These instructions are for your safety. Read them carefully.

WARNING!

This symbol means that important safety instructions need to be emphasized. It concerns your safety.

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

General Operation

Read, understand, and follow all instructions on the machine and in the manual before starting.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area.

Never carry passengers. The machine is only intended for use by one person.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

Operate machine only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

8011-512

Read the operator’s manual before starting the machine

8011-513

Clear the area of objects before mowing

9

Image 9
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Manual Performing any Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsMotion Control Levers Tracking Hour MeterBlade Switch Ignition SwitchParking Brake Fuses Cutting Height Adjuster Seat AdjustmentFuel Shut Off Valve Refueling Operation TrainingSteering Starting the Engine Before StartingPress the control for disengaging the mower deck Open the fuel tank valve Weak Battery Jumper CablesTo remove cables, reverse order Running Ensure that no one is near mower when engaging blade switchOperating on Hills Stopping the Engine Mowing Tips Manual Transport Maintenance Maintenance Replacing battery BatteryTire Pressures Safety SystemDeck Belt Installation Deck BeltDeck Belt Removal Pump Belt Belt InstallationBelts Replacing Pump BeltCutting Blades Leveling deck Adjusting the Mower DeckAnti-scalp rollers Removal and Installation CleaningUse protective glasses when cleaning and washing Caster WheelsLubrication Lubrication ScheduleGeneral Front Wheel Mount Wheel and Deck ZerksFront Wheel Bearings Deck SpindlesTransaxle Transmission Fluid Change Purging Procedures Problem Cause Troubleshooting guideTroubleshooting guide Service StorageWinter Storage Engine Pigtail PUR WHT GRY Zmkw 5222 Zmkw 6124 Technical DataFrame Hex Head Cap Screws Torque SpecificationsStandard Hardware Metric Standard HardwareUSA requirements Conformity certificatesDelivery Service Service JournalAction Stamp, signDate, mtr reading Stamp, sign After 10 hoursDaily Service Hour Service Service Journal Service Journal At least once each year Page 115 312726R1 11/10/09