Yazoo/Kees ZKWQL48170, ZKWQL48190 Adjustments Park Brake, Cutting Height, Mower Deck Leveling

Page 6

ADJUSTMENTS

PARK BRAKE:

1.Stop engine and remove key. While the park brake lever”A” is in the on postion. The distance between the swivel”C” and the bolt head”B” should be 3/8” to 1/2” approximately.(See Fig. 2)

2.If adjustment is needed, using two 1/2” wrenchs, loosen the nut”F” above the turnbuckle”G” while holding the turnbuckle”G” from turning. After the nut”F” is loose and out of the way. While holding the bolt head”B” from turning. Turn the turnbuckle”G” the proper direction to lengthen the distance or to shorten the distance. After the proper distance is obtained retighten the nut”F” against the turnbuckle”G”.

3.While the park brake lever”A” is still in the on postion, measure the lenght of the spring”D”. Should measure 2”.(See Fig. 2)

4.If adjustment is needed loosen or tighten the nut”E” below the spring”D”. While holding the turnbuckle”G” to keep the assembly from turning.

FIGURE 2

CUTTING HEIGHT:

1.Stop the mower and disengage the blades.

2.Raise the deck height lever to the transport position.

3.Remove the height adjustment pin and place it in the desired cutting height hole. Move deck height lever down onto the pin and mow. NOTE: anti-scalp rollers must be in the proper position for maximum deck floatation. See the decal on the front deck.

MOWER DECK LEVELING:

1.Position mower on a flat surface and stop engine.

2.Check the tire pressure of all four tires. Inflation should be 15 psi.

3.Place two 2x4’s on edge under the cutting deck from front to rear and lower the deck down onto the 2x4’s.

4.Adjust the four upper chain bolts “H” to the center of the slot in the deck lift arms (See Fig 2). NOTE: make sure deck lift blocks are tightly bolted to the frame .

5.Check chains for equal tension. If unequal, adjust upper chain bolt in slot.

6.Place deck in the 5" cutting height and measure from the cutting edge of the blade to a flat surface to check deck cutting height.

6

Image 6
Contents Operator’s Manual for Accordance with Instructions and Common SensePage Setup and Adjustments Table of ContentsSafety Maintenance Trouble ShootingSafety Training PreparationOperation Safety Transportation Equipment Setup and AdjustmentsAdjustments Park Brake Cutting HeightMower Deck Leveling Adjustments Reverse Spring Detent AdjustmentThrottle Lever Tension Left side cut away view Adjustments Motion Control Linkage Adjustment Operating Instructions ControlsOperating Instructions Starting and Operation Maintenance Maintenance Problem Possible Causes Wiring Diagram Service Record Page

ZKWQL48170, ZKWQL48190 specifications

Yazoo/Kees, a trusted name in outdoor power equipment, has introduced the ZKWQL48170 and ZKWQL48190 zero-turn mowers, designed to meet the needs of both professional landscapers and homeowners seeking high-performance lawn care solutions. These models stand out with their robust construction, advanced technology, and user-friendly features, ensuring efficient operation in various mowing conditions.

The ZKWQL48170 features a powerful engine that delivers exceptional torque and speed, making it capable of handling tough mowing tasks effortlessly. With a cutting width of 48 inches, it is ideal for medium-sized lawns, allowing for quick and efficient mowing. On the other hand, the ZKWQL48190 boasts a wider 54-inch cutting deck, making it perfect for larger properties and commercial applications. This increased width translates to reduced mowing time without sacrificing quality.

Both mowers are equipped with a durable fabricated deck, which is designed to withstand the rigors of frequent use. This deck construction ensures longevity and provides an excellent cutting performance across various terrains. Additionally, the decks feature a range of adjustable cutting heights, allowing users to achieve their desired grass length, from a low cut for a pristine finish to a higher cut for optimal growth and health.

Comfort is a priority in the design of these zero-turn mowers. The ZKWQL48170 and ZKWQL48190 come with ergonomically designed seats that provide ample cushioning, reducing fatigue during prolonged use. The intuitive control system allows for easy maneuverability, with responsive steering controls that enable users to navigate around obstacles and tight corners with precision.

These mowers also incorporate advanced technologies to enhance performance and user experience. The integrated cutting system ensures an even and consistent cut, while the easy-access maintenance points make routine servicing a breeze. Additionally, both models feature a fuel-efficient engine, minimizing downtime and maximizing productivity.

In summary, Yazoo/Kees ZKWQL48170 and ZKWQL48190 zero-turn mowers combine durability, comfort, and advanced technology to deliver outstanding lawn care results. With a variety of features designed for efficiency and ease of use, these mowers are a fantastic choice for anyone looking to achieve a beautifully manicured lawn with less effort and time. Whether for personal use or commercial landscaping, they deliver the performance and reliability that professionals and homeowners can trust.