Yazoo/Kees KHKW36151, KHKW48171 important safety instructions Maintenance

Page 13

MAINTENANCE

5.Hardware: Stop engine and remove key thoroughly inspect the entire machine for any missing or loose hardware. Check daily.

6.Air cleaner: Stop engine and remove key. Remove plastic cover and loosen wingnut on the air cleaner. Remove the foam pre-cleaner and wash or replace if needed. Inspect paper filter and replace if dirty. Check every 25 hours, daily if in very dirty conditions. Fuel efficiency, engine RPM, and available power goes down rapidly if the air filter is dirty. Prolonged effects could damage the engine.

7.Engine oil: Change oil to manufacturers specifications. Stop engine and remove key. Drain oil when engine is warm. Thoroughly clean around cap before removing. Remove oil drain cap from the right side of engine block and replace drain cap. Remove oil filter and re- place. Put a light coat of clean oil on the filter gasket before installing. Fill engine with oil using manufacturers specs, see Kawasaki owner’s manual. Start engine and idle slowly to allow the oil to recoat the interior of the engine and then inspect for leaks.

8.Hydraulic oil: Check daily. Thoroughly clean around cap. Remove cap. Oil level should be 1” below the bottom of the fill tube. If not, add oil. NOTE: Use only 15W - 50 MOBIL 1.

9.Tire pressure: Check every 25 to 50 hours. Rear tires require 15 psi and caster tires 20 psi

10.Belts: Check every 25 hours. Stop engine and remove key. Check the condition of all belts.

12. Lubrication (every 25 hours): Caster tires and front caster pivots

(Clean grease zerk thoroughly before greasing)

13.Fuel filter: Replace annually or as needed.

14.Hydraulic filter and oil: Change every 500 hours or yearly. Stop engine and remove key. Clean around the filter and the drain plug on the bottom side of the tank. Remove the filter and allow any oil to drain from the filter head.Then replace with new filter. Use only Yazoo/Kees p/n 102606, filter which has a bypass valve and the correct micron filter. Remove one of the hydraulic lines from the bottom of the tank and allow the tank to drain, reinstall the hydraulic line. Fill tank with 15W - 50 MOBIL 1. 1” below the fill tube and replace cap. Block up the rear of unit until wheels will rotate freely and start engine at a slow idle, move the control levers forward and run for several minutes. Stop engine and recheck oil level. If wheels don’t response an air lock has occured within the hydraulic system. Bleed air from lines, or let stand overnight to allow the air time to dissipate out of the oil. Retry responses & check the oil level. Note: Serious damage to the pumps and wheel motors can occur if the system is ran with an air lock.

13

Image 13
Contents Operator’s Manual for Page Setup and Adjustments Safety Table of Contents MaintenanceTrouble Shooting Operating InstructionsPreparation Safety TrainingOperation Equipment Setup and Adjustments Safety TransportationCutting Height Rear Deck Adjustment Cuttingheightadjustmentchart Motion Control AdjustmentReverse Spring Detent Adjustment Auxiliary Blade Belt Blade Drive Belt AdjustmentEngine Belt Guides Interlock Safety SystemPump Belt Operating Instructions Controls Starting and Operation Maintenance Cutter Housing Spindle Assemblys When a problem occurs, do not overlook the simple causes Service Record

KHKW36151, KHKW48171 specifications

Yazoo/Kees is a well-known name in the outdoor power equipment industry, particularly noted for its high-quality mowers and lawn care machinery. Among its offerings, two standout models are the KHKW36151 and KHKW48171, both of which exemplify the brand's commitment to performance and durability.

The KHKW36151 is a robust commercial mower aimed at professional landscapers and lawn care businesses. It features a powerful engine that ensures consistent performance even under heavy loads. This model is equipped with a 36-inch cutting deck, allowing for efficient maneuverability in tight spaces while still delivering a clean cut. The KHKW36151 utilizes advanced hydrostatic transmission technology, providing seamless speed adjustments and making it easy to navigate varying terrains. The ergonomic design of the operator station enhances comfort, reducing fatigue during long working hours. Additionally, the mower’s durable frame construction ensures it can withstand the rigors of daily use, making it a reliable choice for any contractor.

On the other hand, the KHKW48171 takes performance to a new level with its 48-inch cutting deck, making it suitable for larger properties and commercial applications. This model is designed for efficiency and speed, boasting a higher horsepower engine that increases productivity. Like its counterpart, the KHKW48171 features hydrostatic transmission that allows for smooth operation and easy control over ground speed. This model is particularly noted for its advanced cutting technology, which enables users to achieve exceptional finish quality regardless of the grass type. The KHKW48171 is also engineered with an emphasis on user comfort, featuring an adjustable seat and intuitive controls that make operation a breeze.

Both models are built with durable materials, ensuring longevity and reliability in various environmental conditions. Key characteristics include extensive safety features, such as automatic blade brakes, to protect the operator during use. Furthermore, Yazoo/Kees provides exceptional customer support and service for both machines, which adds value for professionals who rely on these mowers for their livelihoods.

In summary, the Yazoo/Kees KHKW36151 and KHKW48171 represent the pinnacle of commercial mowing technology, offering robust performance, ergonomic design, and dependable durability. Whether for small yards or expansive commercial properties, these mowers are engineered to tackle the toughest jobs while ensuring operator comfort and satisfaction.