M&S Systems DMC1HC Tools Required, Room Station Installation, Patio Station Installation

TOOLS REQUIRED

The finish-out installation should be made after the application of any wall covering material.

The tools required for the installation finish-out are:

•#2 Phillips screwdriver

•Standard fl at head screwdriver

•Wire stripper/cutter

•Level

ROOM STATION INSTALLATION

1.Collect all the connectors included in the Room Station packages and place them in the wall housing for use later.

2.At each Room Station location, strip approximately 4 inches of jacket from the Cat-5 cable and separate the colored wires. Strip 1/2 inch of insulation from each wire as shown in Figure 2.

3.Connect each colored wire to its respective screw terminal in the Room Station. Note that some screw terminals have more than one wire connected to them.

4.Mount each Room Station to its mounting ring using the two screws provided with each dmc1 Room Station as shown in Figure 3.

PATIO STATION INSTALLATION

Use wire nuts for the following connections.

1.	At each Patio Station location, strip approximately 4 inches of
	jacket from the Cat-5 cable and separate the colored wires. Strip
	1/2 inch of insulation from each wire as shown in Figure 2.
2.	Connect ORANGE wire to the ORANGE wire on the Patio Station.
3.	Connect BLUE wire to the BLUE wire on the Patio Station.
4.	Connect ORANGE/WHITE wire to the ORANGE/
	WIRE wire on the Patio Station.

KEEP CABLE	STRIP EACH
PAIRS TWISTED	WIRE BACK
TO REDUCE HUM	MAXIMUM
	1/2 INCH
CAT-5 CABLE
	STRIP CABLE JACKET
	BACK 4 INCHES

Figure 2. Cat-5 Wire Preparation

ORANGE / WHITE
	ORANGE	BROWN &
GREEN / WHITE		BLUE / WHITE
		MOUNTING
		RING
CONNECT		ROOM
CAT-5
		STATION
WIRES
CAT-5
GREEN &		MOUNTING
	BLUE	SCREWS
BROWN / WHITE

Figure 3. Attaching Room Station

PATIO

STATION

ORANGE ORANGE

BLUE

5.	Connect GREEN/WHITE wire to the GREEN/
	WIRE wire on the Patio Station.
6.	Connect GREEN and BROWN/WHITE wires to
	the GREEN wire on the Patio Station.
7.	Connect BROWN and BLUE/WHITE wires to

BLUE

ORANGE / WHITE

GREEN / WHITE

ORANGE / WHITE

the BROWN wire on the Patio Station.

8. Mount the Patio Station to the housing using the

two screws provided with the Patio Station.

CAT-5		GREEN / WHITE
GREEN &	BROWN &	GREEN
BROWN / WHITE	BLUE / WHITE	BROWN

Figure 4. Patio Station Wiring Connections

2