Yard-Man 11B-106C401 manual Unpacking, Assembling Your Lawn Mower, Removing Unit From Carton

Page 6

SECTION 3: UNPACKING

Removing Unit From Carton

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove loose parts if included with unit (i.e., operator’s manual, bottle of oil, etc.).

•Cut corners and lay carton down flat.

•Remove packing material.

•Roll or slide unit out of carton. Check carton thoroughly for loose parts.

SECTION 4: ASSEMBLING YOUR LAWN MOWER

IMPORTANT: This unit is shipped WITHOUT GASOLINE. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.

NOTE: Reference to right or left hand side of the mower is observed from the operating position.

Tools Required

Pair of pliers (not necessary, but helpful)

Assembling Mower

•Remove any packing material which may be between the upper and lower handles for shipping purposes.

•Disconnect spark plug wire from the spark plug and attach rubber boot to a bolt on the engine to ground. See Figure 2.

Rubber Boot

Spark Plug

Figure 2

•Pull up and back on the upper handle to raise the handle into the operating position. Make certain the lower handle is seated securely into the handle mounting brackets. Tighten the hand knobs on each side of the handle (carriage bolts must be seated properly into the handle). See Figure 3.

NOTE: Your mower is shipped with the handle in the higher height position. If you wish to lower the height of the handle, refer to the Handle Height Adjustment Section on page 9.

Carriage

Bolt

Carriage Bolt

Hand

Knob

Figure 3

•Remove the hairpin clips from the outer holes in the weld pins on the handle mounting brackets.

•Using a pair of pliers, squeeze one leg of the lower handle against the handle mounting bracket. Insert the hairpin clip into the inner hole on the weld pin.

See Figure 4. Repeat on other side.

Hairpin

Clip in

Inner Hole

Weld

Pin

Lower

Handle

Handle

Mounting

Bracket

Figure 4

•The rope guide is attached to the right side of the upper handle. Loosen the wing nut which secures the rope guide. For location of the wing nut, see Figure 5.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationDo not Slope Gauge 15oRemoving Unit From Carton UnpackingAssembling Your Lawn Mower Tools RequiredThrottle Control Know Your Lawn MowerBlade Control Handle Recoil StarterOperating Your Lawn Mower Wheels must be placed in the same relative Cutting Height AdjustmentHandle Height Adjustment Position. See FigureService Maintaining Your Lawn MowerDeck Maintenance Engine MaintenanceTrouble Shooting Guide Trouble Possible Causes Corrective ActionParts List Model Code DescriptionModel Page MANUFACTURER’S Limited Warranty for

11B-106C401, 11B-106C701 specifications

The Yard-Man 11B-106C701 and 11B-106C401 are two robust outdoor power equipment models designed for homeowners who demand efficiency and durability in their lawn maintenance. Manufactured by Yard-Man, a brand known for its commitment to quality and innovation, these models are perfect for tackling medium to large yards with ease.

One of the key features of both models is their powerful engine. The Yard-Man 11B-106C701 is equipped with a reliable gas engine that provides ample power for cutting through thick grass, weeds, and other tough terrain. The 11B-106C401, on the other hand, boasts a slightly more compact engine, making it an excellent choice for those who prefer a lighter machine without sacrificing performance. Both engines are engineered for fuel efficiency, ensuring longer runtime and decreased operational costs.

The cutting deck is another significant aspect of these models. The Yard-Man 11B-106C701 features a robust steel deck that measures 21 inches, allowing for a wide cutting path that reduces mowing time. Similarly, the 11B-106C401 offers a versatile cutting width, making it capable of maneuvering through tight spaces. Each model includes several cutting height adjustments, making it easy for users to achieve their desired grass length, whether they prefer a short, manicured look or a longer, more natural setting.

Technologically, both models come equipped with advanced features to enhance user experience. The self-propelling system on the Yard-Man 11B-106C701 allows for ease of use on uneven terrain, allowing the mower to adjust its speed to the user's pace. Meanwhile, the 11B-106C401 is designed with an easy-start mechanism, making it user-friendly even for those who may be new to lawn maintenance.

Another noteworthy characteristic is the ergonomic design of both mowers. They are equipped with padded handles that reduce fatigue during extended use and provide a comfortable grip. The compact and lightweight frame ensures that both models are easy to maneuver around landscape features such as gardens and trees.

In conclusion, the Yard-Man 11B-106C701 and 11B-106C401 blend power, efficiency, and innovative features for a great lawn care experience. With their durable engines and user-friendly technologies, these mowers are excellent choices for homeowners looking to invest in dependable outdoor equipment that delivers exceptional performance year after year.
Top Page Image Contents