Yard-Man 11A-108Q401 manual Unpacking, Assembling Your Lawn Mower, Removing Unit From Carton

Page 7

SECTION 3: UNPACKING

Removing Unit From Carton

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove loose parts if included with unit (i.e., operators manual, bottle of oil, etc.).

•Cut corners and lay carton down flat.

•Remove packing material.

•Roll or slide unit out of carton. Check carton thoroughly for loose parts.

SECTION 4: ASSEMBLING YOUR LAWN MOWER

IMPORTANT: This unit is shipped WITHOUT GASOLINE or OIL. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.

NOTE: Reference to right or left hand side of the mower is observed from the operating position.

Tools Required

Pair of pliers (not necessary, but helpful)

Assembling Mower

•Remove any packing material which may be between the upper and lower handles for shipping purposes.

•Disconnect spark plug wire from the spark plug and ground it against the engine.

•Pull up and back on the upper handle to raise the handle into the operating position. Make certain the lower handle is seated securely into the handle mounting brackets. Tighten the hand knobs on each side of the handle (carriage bolts must be seated properly on the handle). See Figure 1.

NOTE: Your mower is shipped with the handle in the higher height position. If you wish to lower the height of the handle, refer to the Handle Height Adjustment Section on page10.

•Remove the hairpin clips from the outer holes in the weld pins on the handle mounting brackets.

•Using a pair of pliers, squeeze one leg of the lower handle against the handle mounting bracket. Insert the hairpin clip into the inner hole on the weld pin.

See Figure 2. Repeat on other side.

Hairpin

Clip in

Inner Hole

Weld

Pin

Lower

Handle

Handle

Mounting

Bracket

Figure 2

Carriage Bolt

Carriage

Bolt

Hand

Knob

•Insert post on cable ties into holes provided on the lower handle. Pull the cable tie tight and trim the excess. See Figure 3.

Cable Tie

Post

Hole on

Figure 1

Lower

Handle

Figure 3

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesDo not ServiceSlope Operation ChildrenYour Responsibility Slope Gauge Tools Required UnpackingAssembling Your Lawn Mower Removing Unit From CartonRecoil Starter Know Your Lawn MowerBlade Control Handle Throttle ControlBefore Starting Using Your Rotary MowerOperating Your Lawn Mower Gas And Oil Fill-UpCutting Height Adjustment ServiceHandle Height Adjustment To remove blade Lubrication ChartMaintaining Your Lawn Mower Cutting BladeEngine Maintenance Deck MaintenanceTo Reinstall Blade Corrective Action Trouble Shooting GuideTrouble Possible CausesRef. No Description Parts List for Model 108QModel 108Q MANUFACTURER’S Limited Warranty for

11A-108Q401 specifications

The Yard-Man 11A-108Q401 is a reliable and versatile lawn mower designed for homeowners seeking an efficient solution for lawn care. This robust machine offers a variety of features and technologies aimed at enhancing performance and ease of use, making it a popular choice among gardening enthusiasts.

One of the defining features of the Yard-Man 11A-108Q401 is its powerful engine. Equipped with a reliable OHV (Overhead Valve) engine, this mower provides ample power and torque, ensuring it can handle various grass types and lawn conditions with ease. The engine’s efficiency not only improves mowing performance but also contributes to longer operational life and reduced fuel consumption.

The mower boasts a cutting width of 21 inches, making it suitable for both small and medium-sized lawns. The cutting deck is designed with a durable steel construction, which not only ensures longevity but also helps maintain a sharp blade for cleaner cuts. With adjustable cutting heights, users can choose from multiple settings to achieve the desired grass length, accommodating different lawn types and conditions.

Another key feature of the Yard-Man 11A-108Q401 is its self-propelled drive system, which significantly reduces the effort required to maneuver the mower. This feature is particularly beneficial for users with larger yards or uneven terrain, as it allows them to maintain control and navigate smoothly without straining themselves.

In terms of user comfort, the mower is designed with ergonomic handles that enhance grip and reduce vibration. This helps to minimize fatigue during extended mowing sessions, allowing users to work more efficiently and comfortably.

The Yard-Man 11A-108Q401 is also equipped with a rear bagging system, which effectively collects grass clippings for easy disposal. This feature not only ensures a tidy finish but also promotes a healthier lawn by recycling nutrients back into the soil.

For added convenience, the mower features a simple push-start system, making it easy for users to start with minimal effort. Maintenance is further simplified with easily accessible components, allowing for quick checks and adjustments.

In summary, the Yard-Man 11A-108Q401 combines power, efficiency, and user-friendly features, making it an ideal choice for homeowners looking to maintain their lawns effectively. With its durable construction and advanced technologies, this lawn mower stands out as a reliable companion for all your lawn care needs.
Top Page Image Contents