NETGEAR 2409 manual European Emission Statement, Safety, 201-10080-01

Page 3
European Emission Statement

Federal Communications Commission (FCC) and European Radiation Exposure Statements

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 30 cm (12 inches) during normal operation. This device should not be co-located with other transmitters.

European Emission Statement

For EU, use of any antenna requires careful planning and extra consideration to comply with EU emissions, health standards and regulations. It is recommended that a qualified professional installer service is consulted for site survey and proper installation. Antenna installation must comply with the maximum level authorized by each country. See http://www.NETGEAR.com/go/antannas_eu for product combinations that comply with EU regulations.

Safety

The NETGEAR wireless devices WG302, FWG114P, FVM318, ME103, and FM114P have been tested with the antenna ANT2409 and have successfully passed all relevant tests contained in the Standard for the Safety of Information Technology Equipment for Europe (EN 60950-2000) equivalent to North American Standards UL 60950, Third Edition, CAN/CSA-C22.2 No. 60950-00, Third Edition and Australian/New Zealand Standards ACA TS 001-1997, and AS/NZS 3260:1993 with A1 through A4.

iii

201-10080-01

Image 3
Contents 201-10080-01Version 1.0 March NETGEAR, Inc4500 Great America Parkway Santa Clara, CA 95054 USATrademarks Statement of Conditions201-10080-01 Safety European Emission Statement201-10080-01 201-10080-01 Chapter Getting Started with the ANT2409 ContentsInstalling the 9 dBi Omni-directionalAntenna SpecificationsContents Package Contents Chapter Getting Started with the ANT2409Welcome Lightning Arrestor Getting Started with the ANT2409 Pole Mount ConfigurationGetting Started with the ANT2409 Flat Surface Mount ConfigurationPlacement and Other Important Considerations Getting Started with the ANT2409 Installing the 9 dBi Omni-directionalAntenna 3TEP  3TEP  3TEP  3TEP  First, Assemble and Mount the AntennaFigure 2-1 Antenna Assembly and Mounting Installing the 9 dBi Omni-directionalAntenna1.Turn off your wireless unit Now, Connect the AntennaInstalling the 9 dBi Omni-directionalAntenna Connecting the Antenna for an Indoor Installation Installing the 9 dBi Omni-directionalAntenna Specifications Chapter Specifications2 Meter Antenna Cable SpecificationsM CABLE Specifications N/SMA Adaptor AccessorySpecifications Lightening ArrestorSpecifications Radiation Pattern Elevation Vertical plane     Radiation Pattern Azimuth Horizontal planeSpecifications