How to Connect
How to Connect
1.Connect a data cable from the TUNER 1 DATA IN jack to the TUNER DATA PORT of a McIntosh Control Center or preamplifier.
2.Connect a power control cable from the POWER CON- TROL IN jack to the POWER CONTROL OUT or ACC jack of a McIntosh Preamplifier, Control Center or other McIntosh component.
3.Connect shielded cables from the TUNER 1 FIXED OUTPUTS to the TUNER INPUTS of a preamplifier
or control center.
Note: An optional connection would be to use the TUNER 1 VARIABLE OUTPUTS.
4.Connect the FM Antenna or Cable (from the Cable Company) to the MR85 Tuner 75W (Ohm) FM ANTenna connector.
5.Connect with the supplied cable, from the 5 Pin Socket of the McIntosh RAA1 Remote AM Antenna to the MR85 Tuner AM ANT DIN socket.
6.Plug the MR85 AC Power Cord into a live AC Outlet.
McIntosh Control Center
To AC Outlet
9