Important Information, Connector Information

Pin 1

Pin 3

Pin 2

Important Information

1.The following Connecting Cable is available from the McIntosh Parts Department:

Power Control Cable Part No. 170-202

Six foot, 2 conductor shielded, with two 1/8 inch stereo mini phone plugs.

2.For additional connection information, refer to the owner’s manual(s) for any component(s) connected to the XLS112.

3.In the event that the XLS112 over heats, due to improper ventilation and/or high ambient temperature, the protection circuit will activate placing it in the Standby Mode. The Rear Panel Status LED Indicator will illuminate Red and the audio will be muted. When the XLS112 has returned to a safe operating temperature, normal operation will resume.

4.The XLS112’s Power Control Input will function within a 5 to 20 DC Voltage range.

5.To avoid damage, do not connect the speaker level output terminals from any receiver, amplifier or integrated amplifier to the inputs of the XLS112 Powered Subwoofer.

Connector Information

XLR Connectors

Below is the Pin configuration for the XLR Balanced Input and Output Connectors on the XLS112. Refer to the dia- gram for connection:

PIN 1: Shield/Ground

PIN 2: + Signal

PIN 3: - Signal

Power Control Connector

The XLS112 Power Control Input/Output Jacks provide Power On/Off Signals when connected to

other McIntosh Components. A 1/8 inch	Positive
stereo mini phone plug is used for connec-	N/C
tion to the Power Control Input/Output on	Ground
the XLS112.

Introduction

The McIntosh XLS112 Powered Subwoofer is designed for Home Theater and Music Reproduction. It has a 12 inch LD/HP1 woofer, a 400 watt amplifier and built-in high and low pass filters.

The XLS112 Powered Subwoofer’s performance is equivalent to the quality of McIntosh’s legendary line of Amplifiers, Preamplifiers, Signal Processors, Signal Sources and Loudspeakers, without imparting distortion or coloration of its own. It also complements the capabilities and the remarkably low distortion of McIntosh Power Am- plifiers.

Many of today’s Loudspeakers are designed only for Home Theater applications. Not so with the XLS112. It is also designed for the accurate reproduction of the low fre- quencies contained in music. Motion picture sound effects, explosions, and vehicle crashes require a wide dynamic range and high sound levels. These sounds are such that a speaker system having moderate distortion would repro- duce them with little audible difference. This is not true with the reproduction of music. Music is by nature and definition harmonious. To reproduce it accurately, all forms of distortion, both harmonic and intermodulation, must be kept to a minimum. This has been the result of the design of the new McIntosh XLS112 Powered Subwoofer. Each component in the device has been carefully designed for durability, efficiency, and above all, low distortion. The McIntosh XLS112 Powered Subwoofer will reproduce mu- sic accurately and function as an excellent Home Theater Powered Subwoofer.

1LD/HP Pat. No. 5,151,943

XLS112 specifications

The McIntosh XLS112 is a remarkable floorstanding speaker that embodies the brand's commitment to delivering exquisite sound quality and innovative technology. Designed with both audiophiles and music enthusiasts in mind, the XLS112 combines cutting-edge engineering with classic McIntosh aesthetics, promising an unparalleled listening experience.

One of the standout features of the XLS112 is its unique 12-inch woofer, which is crafted to produce deep, powerful bass tones. This driver is paired with a specially designed 4-inch midrange and a 1-inch tweeter, ensuring a well-balanced sound across the audio spectrum. The carefully selected drivers work harmoniously to create rich and immersive soundscapes that enhance everything from classical music to contemporary genres.

Another significant characteristic of the XLS112 is its use of advanced technologies like McIntosh's patented Dynamic Power Management, which ensures that the speaker can handle high power levels without distortion. This technology allows the XLS112 to maintain clarity and detail even at loud volumes, making it an ideal choice for those who enjoy a high-impact listening experience.

The XLS112 is not only engineered for performance but also designed to be visually appealing. It features a stunning cabinet constructed from premium materials, finished in a high-gloss ebony veneer. The elegant design is accentuated by the iconic McIntosh logo illuminated in blue, adding a touch of sophistication to any audio setup.

In addition to aesthetics, the XLS112 is equipped with adjustable precision-tuned ports. These ports allow users to fine-tune the bass response based on their room's acoustics, providing flexibility to tailor the sound to individual preferences. The speaker’s design also includes robust binding posts, enabling easy connections to various audio equipment.

Furthermore, the XLS112 is engineered to be versatile. It performs excellently in various listening environments, whether in a dedicated home theater setup or a casual living space. The combination of its powerful sound, stunning design, and adaptability makes it a standout choice for music lovers seeking top-tier performance.

In conclusion, the McIntosh XLS112 exemplifies the brand's legacy of excellence in audio engineering. With its impressive features, innovative technologies, and luxurious design, this speaker is a worthy investment for anyone serious about high-fidelity sound. Whether it's intricate details in a symphony or the thumping bass of a rock anthem, the XLS112 delivers a sonic experience that captivates and enchants.