Stiga 8211-0276-02 Starting Engine, Stopping, Catalytic Converter Pro18 Pro20, Steering AID Pro20

Page 12

ENGLISH

GB

 

 

to move, release the drive pedal – the machine must stop (applies to President, Royal, Pro16, Pro18, Pro20).

-press the drive pedal so that the machine starts to move, engage the cruise control, lift your weight off the seat – the machine must stop (ap- plies to Royal, Pro16, Pro18, Pro20).

-press the drive pedal so that the machine starts to move, engage the cruise control, press the brake pedal – the machine must stop (applies to Royal, Pro16, Pro18, Pro20).

-engage the power take-off, lift your weight off the seat – the engine must stop (applies to Sen- ator, President, Royal, Pro16).

-engage the power take-off, lift your weight off the seat, the power take-off must be disengaged (applies to Pro18, Pro20).

Do not use the machine if the safety sys- tem does not work! Take the machine to a service agent for inspection!

STARTING ENGINE

1.Open the fuel cock (fig. 16).

2.Make sure that the sparking plug cable is prop- erly in place.

3.Check to make sure that the power take-off is disengaged.

4a. Senator:

Put the gear lever in neutral

4b. President-Royal-Pro16-Pro18-Pro20: Do not keep your foot on the drive pedal.

5a. Senator-President:

Starting cold engine – put the throttle control in the choke position. Starting warm engine – put the throttle control at full throttle (approx. 1 cm behind the choke position).

5b. Royal-Pro16-Pro18-Pro20:

Put the throttle control at full throttle. Starting cold engine – pull the choke control out fully. Starting warm engine – do not touch the choke control.

6.Depress the brake pedal fully.

7.Turn the starter key and start the engine.

8a. Senator-President:

Once the engine has started, move the throttle con- trol gradually to full throttle if the choke has been used.

8b. Royal-Pro16-Pro18-Pro20:

Once the engine has started, push the choke control

in gradually if it has been used.

9.When starting from cold, do not make the ma- chine work under load immediately, but let the en- gine run for some minutes first. This will allow the oil to warm up.

When in use, always operate the engine at full throttle.

STOPPING

Disengage the power take-off and apply the park- ing brake.

Allow the engine to idle 1 - 2 mins. Stop the engine by turning off the ignition key.

Shut off the petrol cock. This is particularly impor- tant if the machine is to be transported on a trailer for example.

If the machine is left unattended, re- move the lead from the spark plug. Also remove the starter key.

The engine may be very warm immedi- ately after it is shut off. Do not touch the silencer, cylinder or cooling flanges as it can cause burns and injury.

CATALYTIC CONVERTER (Pro18 - Pro20)

The catalytic converter gets very hot during opera- tion. The heat remains for a long time after the en- gine has been stopped. Be aware of fire risk.

Do not park in close proximity to in- flammable objects. Do not cover the machine until the catalytic converter has cooled down.

STEERING AID (Pro20)

Built-in function in order to facilitate steering. The operator only has to turn the steering wheel gently. An hydraulic torque amplifier creates the remain- ing force.

As opposed to a normal servo steering (e.g. in a car), the steering aid has a limited capacity. This means that it has some characteristics that might be considered negative:

-at a low engine rpm or in situations where extra steering force is needed, steering can be consid- ered to be “jumpy”.

-the machine should always be moving when the steering is used. Avoid turning the steering

13

Page 11 Page 13
Image 12
Page 11 Page 13
Contents I G a P a R K Park Senator President Royal Pro Open 75 mm MAX Symbols GeneralControls Instruments Implement LifterParking Brake THROTTLE/CHOKE ControlIgnition LOCK/SPOTLIGHT Power TAKE-OFF Senator President Royal Pro16 Power TAKE-OFF Pro18 Pro20Cutting Height Adjustment Pro16 Pro18 Pro20 Gear Lever SenatorAreas of USE Sand Spreader Pro20Disengaging Lever Presi- dent Royal Pro16 Pro18 Pro20 Fuel GAUGE/FUEL CAPStart and Operating Starting Engine StoppingCatalytic Converter Pro18 Pro20 Steering AID Pro20Service and Maintenance OIL Filter Engine Royal Pro16 Pro18 Pro20 AIR Filter EngineAIR Filter Catalytic CONVERT- ER Pro18 Pro20 Sparking PlugBattery Cooling AIR Intake EngineLubrication Chassis Steering Cables Senator President RoyalPatent Protection of Designs Steering Chains Pro16 Pro18 Pro20

8211-0276-02 specifications

The Stiga 8211-0276-02 is a high-quality lawnmower designed for efficiency and ease of use, making it an exceptional choice for homeowners and professionals alike. This model embodies a blend of advanced technology, durable construction, and user-friendly features, ensuring a concise and effective lawn care experience.

One of the standout features of the Stiga 8211-0276-02 is its powerful motor. Equipped with a robust engine that provides sufficient torque and cutting power, this lawnmower can tackle various grass types and lengths, making it suitable for diverse environments whether you’re maintaining a small yard or a larger landscape.

The cutting deck of the Stiga 8211-0276-02 is crafted from high-quality steel, ensuring longevity and resistance to wear and tear. This robust design not only enhances performance but also offers a clean cut, promoting healthier lawn growth. The adjustable cutting height feature adds versatility, allowing users to select from multiple positions to achieve the desired lawn finish.

This model incorporates advanced blade technology that ensures a precise and efficient cutting process. The blades are designed to minimize grass clippings and provide a cleaner discharge, whether mulching or bagging is preferred. Enhanced aerodynamics also contribute to a smoother operation, reducing the overall effort required during mowing.

The Stiga 8211-0276-02 is designed with user comfort in mind. It includes an ergonomic handle that provides a comfortable grip, reducing fatigue during extended use. The compact design of the lawnmower makes it easy to maneuver around tight corners and obstacles, ensuring a well-groomed lawn without the hassle.

In addition to its practical features, the Stiga 8211-0276-02 also prioritizes safety. It is equipped with safety measures such as a blade brake system, which stops the blades instantly when the operator releases the handle, significantly reducing the risk of accidents.

Overall, the Stiga 8211-0276-02 combines strength, efficiency, and safety into a reliable lawn care tool. With its superior construction and thoughtful design, this lawnmower stands out as a top choice for anyone looking to maintain their outdoor spaces efficiently and effectively.
Top Page Image Contents