Areas of USE, Seat 1T, Engine casing 8U | Stiga DIESEL 4WD instruction

ENGLISH

2.4.18 Seat (1:T)

The seat can be folded and adjusted front- rear. The seat can be adjusted as follows:

1.Move the control lever (1:S) upwards.

2.Set the seat to the desired position.

3.Release the control lever (1:S) to lock the seat.

The seat is equipped with a safety switch that is connected to the machine’s safety system. This means that certain dangerous activities are not pos- sible when there is nobody sitting on the seat. Also see 4.5.2.

2.4.19 Engine casing (8:U)

In order to access the fuel cock, battery and engine, the machine has an engine casing that can be opened. The engine cas- ing is locked with a rubber strap.

The engine casing is opened as follows:

1.Undo the rubber strap (8:V) at the front edge of the casing.

2.Carefully lift the engine casing back.

Close in the reverse order.

The machine may not be operated un- less the engine casing is closed and locked. Risk of burns and crushing in- juries.

2.4.20Quick-release mounting (31:H)

The quick connections can be separated, which makes it very easy to shift between the different implements.

The quick connections allow the deck to be moved easily between the two posi- tions:

•Normal position with fully tensioned belt.

•4 cm behind the normal position with slackened belt so that the deck gets closer to the base ma- chine.

As the belt idler is released from the belt, the quick connections simplify belt and deck replacement, and also make shifting to the washing position and service positions easier.

Releasing the belt tension:

1.Remove the locking pins (31:G) from both sides.

2.Open the quick connections by depressing their rear sections with your heel. See (31:F).

When the quick connections are opened, the deck arms rest loosely in the shaft sections. The deck must never be set to the service position or washing position without relocking the quick connections after unhooking the deck belt.

3.Carry out the necessary corrective action, e.g.:

•Unhook the belt.

•Replace the deck by unhooking the deck arms. See fig. 33.

Tensioning the belt:

First tension one side and then the other according to the instructions below.

Do not turn the lever using your hands. Risk of crushing injuries.

1.Place your foot on the lever (32:J) and carefully turn a half turn forwards.

2.Install the locking pin (31:G).

3.Carry out the above on the other side.

3 AREAS OF USE

The machine may only be used for the following tasks using the genuine STIGA accessories stated.

Work	Accessories, STIGA genuine
Mowing	Using mowing decks: 125 Com-
	bi Pro, 125 Combi Pro El and
	with flail mower.
Sweeping	Using brush unit or collector
	brush unit. The use of a dust
	guard is recommended with the
	first option.
Snow clearance	Using snow blade or snow
	thrower Snow chains are recom-
	mended.
Grass clipping and	Using towed collector 30" or
leaf collection	42".
Grass and leaf	Using dump cart Standard, Maxi
transport	or Combi.
Sand spreading	Using sand spreader. Can also
	be used for spreading salt. Snow
	chains are recommended.
Weeding on gravel	Using front-mounted hoe.
paths
Lawn edge trim-	Using edge trimmer.
ming
Moss scarification	Using moss scarifier.

The maximum vertical load on the towing hitch must not exceed 100 N.

The maximum over-run load on the towing hitch from towed accessories must not exceed 500 N. NOTE! Before using a trailer – contact your insur- ance company.

NOTE! This machine is not intended to be driven on public roads.

DIESEL 4WD specifications

The Stiga DIESEL 4WD is a robust and versatile garden tractor designed to tackle a variety of outdoor tasks with ease. Powered by a high-performance diesel engine, this model stands out for its fuel efficiency and reliability, making it an ideal choice for both residential and commercial applications. One of the key characteristics of the Stiga DIESEL 4WD is its four-wheel-drive system, which provides enhanced traction and stability on challenging terrains. This feature allows users to confidently navigate through rough landscapes, wet grounds, or hilly areas without compromising performance.

Equipped with a powerful 4-stroke diesel engine, the Stiga DIESEL 4WD offers impressive torque and the capacity to handle demanding mowing tasks. With a displacement that efficiently manages fuel consumption while maximizing output, it ensures that users can operate for extended periods without frequent refueling. The engine's modern design also incorporates noise-reduction technology, making it quieter than many conventional models.

The cutting deck of the Stiga DIESEL 4WD is another highlight, featuring a wide and durable design that allows for efficient mowing of large areas. The adjustable cutting height offers precision control, enabling users to customize their mowing to suit the grass type and length. This flexibility ensures a clean and professional-looking finish every time.

Stiga's innovative technologies are evident in the ergonomically designed operator’s seat and controls, which provide comfort and ease of use during extended operations. The intuitive dashboard displays crucial information at a glance, including speed, engine status, and fuel levels, allowing the operator to focus on the task at hand without distraction.

Furthermore, the Stiga DIESEL 4WD includes essential features such as a hydrostatic transmission system for smooth speed control, ensuring an effortless driving experience. The heavy-duty chassis guarantees durability, contributing to the overall longevity of the machine.

The versatility of the Stiga DIESEL 4WD is further enhanced by its compatibility with various attachments, such as lawn sweepers, snow plows, and trailers, making it a multi-functional tool for year-round use.

In summary, the Stiga DIESEL 4WD combines powerful performance, advanced technology, and user-friendly design, making it a top choice for anyone seeking an efficient and reliable garden tractor. Whether for mowing, hauling, or clearing tasks, this model reliably meets the diverse needs of modern landscaping and garden maintenance.