How to Operate the PS112 in Home Theater

How to Operate the PS112 in Home Theater

Level Control

Start with the LEVEL CONTROL in the center position and perform the system level calibration on the A/V Con- trol Center or Surround Decoder for the subwoofer level. If the subwoofer level can not be set, adjust the PS112’s LEVEL CONTROL to provide adequate range during cali- bration.

Bass Enhance

Set the BASS ENHANCE Switch to VIDEO to add a low frequency bass boost to enhance the impact of low fre- quency sound effects.

Sub Frequency

When the PS112 is used with a discrete Sub Out from a Home Theater Control Center, the SUB FREQUENCY Control should be set to OUT, as the signal should contain only low frequency information.

Hi-Pass Frequency

When the PS112 is used with a discrete Sub Out from a Home Theater Control Center, the HI-PASS FREQUENCY Control is not used.

Phase

The PHASE Switch sets the acoustic output phase of the PS112 to either 0 or 180 degrees relative to its input. This switch is to help avoid phase cancellation (characterized by a loss of bass information) between the PS112 and any other low frequency producing speaker in the system. Careful listening with this circuit switched to 0 and then listening with it switched to 180 will help you determine if this effect will be beneficial to the system. Set the switch to the desired bass.

Power

When the POWER SWITCH is set to the OFF position, the PS112 can not be turned on by a Remote Power Conrol in- put or audio input signal sensing.

Remote Power Control

The turn-on method uses a turn-on signal from a McIntosh Control Center or Preamplifier. When a Power Control Cable is connected between the Control Center or Pream- plifier and the PS112, the signal-sensing circuit is disabled and the PS112 will always be on whenever the Control Center or Preamplifier is on. The PS112 also has a Power Control OUTput jack for triggering additional subwoofers or other McIntosh component(s).

The PS112 utilizes signal-sensing circuitry for its turn- on method. In this mode, the PS112 turns on when a music signal is detected at the Line INput(s). A time delay of thirty minutes is incorporated in the circuit to prevent the PS112 from turning off during a music or movie passage where there is little low frequency activity. This turn-on method is beneficial when running an additional Power Control Cable is not feasible.

PS112 specifications

The McIntosh PS112 is an innovative subwoofer that exemplifies the brand's dedication to high-fidelity audio reproduction. Blending aesthetic charm with cutting-edge technology, this subwoofer is designed to significantly enhance the low-frequency performance of music and home theater systems.

One of the standout features of the PS112 is its powerful 12-inch woofer, which produces deep, resonant bass that can fill any room. The woofer is constructed with advanced materials for durability and performance, ensuring it delivers a tight response and avoids distortion, even at higher volumes. This allows audiophiles and movie lovers alike to enjoy rich, immersive soundscapes that bring their favorite tracks and films to life.

The PS112 utilizes McIntosh's proprietary power amplifier, boasting a solid power output. This amplifier not only drives the subwoofer with authority but also guarantees efficiency, minimizing energy consumption without sacrificing performance. The advanced amplification system ensures that the PS112 can handle dynamic musical passages and explosive film sound effects with ease, filling the room with clean, powerful bass.

High-pass and low-pass filters provide users with the ability to tailor the PS112's performance to their specific setup. This flexibility ensures integration with various speaker configurations, making it suitable for any existing audio system. Moreover, with phase control and adjustable volume settings, users can fine-tune the subwoofer's output to match their preferences, achieving a seamless blend with other speakers in the array.

The design of the McIntosh PS112 is as impressive as its performance. Encased in a beautifully crafted wooden enclosure, the subwoofer not only looks elegant but also minimizes vibration, ensuring clear sound reproduction. The iconic McIntosh glass front panel and illuminated logo add a touch of luxury, making it an attractive addition to any audiophile’s collection.

Furthermore, the PS112 is equipped with an auto-sensing feature, which enables it to power on and off according to the audio signal. This convenient technology enhances the user experience, ensuring that the subwoofer is always ready when needed while conserving energy during idle periods.

In summary, the McIntosh PS112 subwoofer offers a remarkable combination of power, performance, and aesthetic appeal. With advanced technologies and customizable features, it provides a dynamic auditory experience, making it an exceptional choice for both music enthusiasts and home theater aficionados. Whether for music or film, the PS112 is engineered to deliver an unparalleled bass experience that elevates listening to new heights.