SAFETY PRECAUTIONS
•Warning: Hydraulic fluid under pressure could cause skin injection injury. If you are injured by hydraulic fluid, get medical attention immediately.
•Be observant of the hydraulic hoses lying about the work area, they can be a tripping hazard.
•Use proper lifting techniques when handling the power unit, and do not
•Only use the Power Unit in
•Always be
•Keep clear of hot (engine) parts and exhaust.
•Do not operate tools if oil temperature exceeds 140 °F/60 °C. Operation at high temperatures can cause higher than normal temperatures at the tools which can result in operator discomfort or injury.
•Disconnect battery before servicing electrical com- ponents. Electrocution or burns could result from improper contact.
•Loading and unloading of the power unit is danger- ous. Never attempt to load or unload the power unit without loading ramps, loading dock or an over head crane. Loading ramps must be strong enough, have a low angle, and correct height. Load and unload the power unit on a level surface. Never attempt to load or unload the power unit if the ramp incline exceeds 15 degrees. Failure to follow these instructions may result in serious injury or death.
•Warning: Use of this tool on certain materials during demolition could generate dust potentially containing a variety of hazardous substances such as asbestos, silica or lead. Inhalation of dust containing these or other hazardous substances could result in serious injury, cancer or death. Protect yourself and those around you. Research and understand the materials you are cutting.
Follow correct safety procedures and comply with all applicable national, state or provisional health and safety regulations relating to them, including, if appropriate arranging for the safe disposal of the materials by a qualified person.
6 ► HP TWIN8 User Manual