Shindaiwa X7502872400, AH254EF1 manual Filling the fuel tank, Mixing Instructions, After use

Page 9

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off

containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building,

away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flam-

mable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flammable materials before starting

the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AH254 Contents Safety and operation labelsIntroduction Operating Precautions SafetySafety Equipment and Labels Product Description Operator SafetyEmission Control Exhaust & Evaporative SpecificationsPrior To Assembly AssemblyAdjusting the Hedge Trimmer Cutter Assembly Cutter Assembly PositionsThrottle lever free play Mixing FuelMixing Instructions Filling the fuel tankAfter use Minimize the Risk of FireStarting the Engine If the engine does not start When the Engine StartsStarting a Flooded Engine Stopping the EngineChecking Unit Condition Using the Hedge Trimmer PreparationsOperation Cutting SequenceMaintenance 10/15-Hour maintenance Hour maintenance More frequently in dusty condi- tionsRemove and clean or replace the spark plug Gearcase lubricationHour maintenance Every 50 hours of operation moreRemove and replace the fuel filter element Valve Adjustment Muffler and spark arrester maintenance Cutter blade adjustmentIdle Speed Adjustment Adjusting Engine IdleLong Term Storage Engine Break-InTroubleshooting Guide Engine is knocking Is the engine overheating?Engine stops abruptly Poor accelerationEngine difficult to shut off Top of engine is getting dirty and oilyExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Parts/Serial Number Servicing Information

AH254EF1, X7502872400, AH254 specifications

Shindaiwa has long been recognized as a leader in outdoor power equipment, particularly in the field of professional-grade handheld tools. Among its notable offerings, the Shindaiwa AH254 stands out for its impressive performance and user-friendly features. Designed to cater to both landscape professionals and homeowners, the AH254 combines innovation and durability to tackle a variety of tasks.

One of the key features of the Shindaiwa AH254 is its powerful 24.5cc engine, which delivers outstanding performance while maintaining fuel efficiency. This two-stroke engine is specifically engineered to provide ample torque, making it ideal for heavy-duty applications like trimming, edging, and cultivating. Moreover, the engine is equipped with advanced technology that ensures reduced emissions, making it compliant with stringent environmental regulations.

The AH254 boasts an ergonomic design, with a lightweight frame that minimizes user fatigue during extended periods of operation. Weighing in at just around 8.8 lbs, it enables operators to maneuver easily without sacrificing power or performance. Additionally, the handle is designed for maximum comfort, featuring rubberized grips that enhance control and reduce vibrations.

One of the standout aspects of the AH254 is its versatility. It features a detachable shaft that allows users to switch between various attachments, including brush cutters, hedge trimmers, and pole saws. This adaptability makes it an excellent choice for diverse landscaping tasks, enabling professionals and homeowners alike to efficiently manage their outdoor spaces.

The Shindaiwa AH254 also incorporates a variety of innovative technologies that enhance its performance. Notably, the unit employs a durable, stainless steel shaft that adds to its longevity while ensuring precision in operation. Furthermore, the air filtration system is designed to provide optimal engine performance by keeping debris out, which extends the life of the engine and reduces maintenance needs.

In summary, the Shindaiwa AH254 is a robust, feature-rich outdoor power tool that exemplifies the brand's commitment to quality and user satisfaction. With its powerful engine, ergonomic design, and versatility, the AH254 proves to be an indispensable asset for anyone looking to maintain a beautiful outdoor environment. Whether you are a professional landscaper or a dedicated homeowner, this tool offers the performance and reliability needed to tackle any landscaping challenge.
Top Page Image Contents