Shindaiwa X7502872300 manual Filling the fuel tank, Mixing Instructions, After use

Page 9

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off

containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building,

away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flam-

mable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flammable materials before starting

the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AH254 Contents Safety and operation labelsIntroduction Operating Precautions SafetySafety Equipment and Labels Product Description Operator SafetyEmission Control Exhaust & Evaporative SpecificationsPrior To Assembly AssemblyAdjusting the Hedge Trimmer Cutter Assembly Cutter Assembly PositionsThrottle lever free play Mixing FuelMixing Instructions Filling the fuel tankAfter use Minimize the Risk of FireStarting the Engine If the engine does not start When the Engine StartsStarting a Flooded Engine Stopping the EngineChecking Unit Condition Using the Hedge Trimmer PreparationsOperation Cutting SequenceMaintenance 10/15-Hour maintenance Hour maintenance More frequently in dusty condi- tionsRemove and clean or replace the spark plug Gearcase lubricationHour maintenance Every 50 hours of operation moreRemove and replace the fuel filter element Valve Adjustment Muffler and spark arrester maintenance Cutter blade adjustmentIdle Speed Adjustment Adjusting Engine IdleLong Term Storage Engine Break-InTroubleshooting Guide Engine is knocking Is the engine overheating?Engine stops abruptly Poor accelerationEngine difficult to shut off Top of engine is getting dirty and oilyExceptions 99922201031 02/05/2010 01/2010 Page Page Page Parts/Serial Number Servicing Information

X7502872300 specifications

The Shindaiwa X7502872300 is a powerful piece of equipment designed for professionals and enthusiasts in the landscaping and garden care industry. Known for its reliability and performance, this product has become a favorite among users who demand efficiency and durability in their tools.

One of the primary features of the Shindaiwa X7502872300 is its robust engine. The unit is powered by a high-performance two-stroke engine that delivers outstanding power while ensuring low emissions. This makes it an environmentally friendly choice for those who prioritize sustainability without compromising on performance. The engine is engineered for easy starting, a characteristic that reduces downtime and enhances productivity on the job.

Another standout characteristic of the Shindaiwa X7502872300 is its innovative vibration-dampening technology. This advanced feature minimizes operator fatigue, allowing users to work longer hours comfortably. It’s especially useful for professionals who rely on their tools for extended periods, ensuring they can maintain their focus and efficiency throughout the day.

The design of the X7502872300 also emphasizes ease of use. With a well-balanced structure and an ergonomic handle, operators can maneuver the tool with ease, whether they’re trimming hedges or cutting through dense brush. The lightweight material used in its construction further enhances its portability, making it a practical choice for various landscaping applications.

Shindaiwa has also incorporated a fuel-efficient system into the design, making the X7502872300 economical to operate. Users can expect extended run times, reducing the frequency of refueling and thus increasing overall productivity. This efficiency in fuel consumption is an essential feature for both residential users and commercial landscapers.

Durability is another hallmark of the Shindaiwa X7502872300. Constructed with high-quality materials that withstand the rigors of tough working conditions, this equipment promises longevity and reliability. It is designed to perform well even in challenging environments, ensuring that users can count on it season after season.

In summary, the Shindaiwa X7502872300 offers a blend of power, comfort, and efficiency, making it an excellent choice for anyone looking to enhance their landscaping capabilities. With its advanced features and technologies, it stands out in the market as a top-tier tool that meets the demands of both casual users and professionals alike. Whether you're maintaining a residential garden or managing large commercial properties, the X7502872300 is engineered to deliver results that meet the highest standards.
Top Page Image Contents