Shindaiwa X7502862900 manual Filling the Fuel Tank, Mixing Instructions, After use

Page 8

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gaso- line.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emis- sions. Some states may require the use of automatic

fuel shut-off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel stor- age container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied build-

ing, away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel con- tainer thoroughly before each use.

Filling the Fuel Tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine with- out the muffler and spark arrester screen in place and in good work- ing condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flam- mable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flammable mate- rials before starting

the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine.

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DH231 Hedge Trimmer Introduction ContentsSafety and operation labels Safety Operating PrecautionsWork Safely Stay AlertCutter Blades Blade Cover Operating the Hedge Trimmer Specifications Product DescriptionExamples of 501 mixing quanti- ties Emission Control Exhaust & EvaporativeMixing Fuel Filling the Fuel Tank Mixing InstructionsAfter use Minimize the Risk of FireStarting the Engine Starting the EngineBefore starting the engine Operation MaintenanceStopping the engine Fasteners MufflerSpark Plug Hour maintenance More frequently in dusty conditions 10 15 hour maintenance Remove and clean the spark plugEvery 20 and 100 hours Gearcase lubrication Every 20 hoursRemove and replace fuel filter element Hour maintenanceThrottle free play adjustment Cutter blade adjustment Idle Speed Adjustment Clean external parts thoroughlyLong Term Storage To do soTroubleshooting Guide Engine is knocking Poor acceleration Engine stops abruptlyExceptions 99922201031 02/05/2010 99922201033 Page Page Servicing Information Parts/Serial Number

X7502862900 specifications

The Shindaiwa X7502862900 is a powerful and innovative professional-grade backpack blower, designed to meet the demanding needs of landscaping and maintenance professionals. With its robust engineering and advanced features, this model stands out in the competitive arena of outdoor power equipment.

One of the most notable features of the X7502862900 is its impressive engine performance. It is fitted with a high-performance 75.6 cc 2-stroke engine that delivers outstanding power while maintaining fuel efficiency. This engine technology ensures that users can tackle the most challenging tasks without the need for frequent refueling, enhancing productivity on the job.

Another key attraction of the X7502862900 is its lightweight design, which allows for extended usage without causing unnecessary fatigue. Weighing in at approximately 26.4 pounds, it strikes an excellent balance between power and portability. The ergonomic harness with padded straps provides added comfort, allowing users to maneuver through various terrains and tight spaces with ease.

The blower’s air volume and velocity are impressive, achieving air speeds of up to 230 mph and airflow ratings of 756 CFM, making it exceptionally effective for moving large piles of leaves, grass clippings, and debris. This combination of speed and volume ensures that users can maintain clean and tidy outdoor spaces efficiently.

Shindaiwa has also incorporated advanced technologies into the X7502862900 to enhance its performance and reliability. The Back Pressure Technology optimizes exhaust flow, improving fuel combustion and overall efficiency. Additionally, the blower features a unique anti-vibration system that reduces operator fatigue, providing a smoother and more comfortable user experience.

Maintenance is made easy with the X7502862900, as it is equipped with a convenient air filter system that enhances engine life and performance. The easy-access design of the filter compartment allows users to perform routine maintenance without hassle.

In conclusion, the Shindaiwa X7502862900 is a high-performance backpack blower that combines power, efficiency, and user comfort. With its advanced engine, impressive output, and thoughtful design features, it caters to the demanding requirements of professionals in the landscaping and maintenance industry, making it an essential tool for any outdoor task. Whether it's for residential or commercial use, the X7502862900 delivers exceptional results, making yard work faster and more efficient.
Top Page Image Contents