Shindaiwa 68800-94313, AHS2510 manual Prior To Assembly, Product Description, Specifications

Prior To Assembly

Using Figure 3 as a guide, familiarize your- self with the Shindaiwa AHS2510 articulat- ed hedge trimmer and its various compo- nents. Understanding your machine helps ensure top performance, longer service life, and safer operation.

Before assembling, make sure you have all the components required for a complete unit:

nEngine/outer tube assembly

nGearcase/cutter assembly

nKit with this manual and tool kit for routine maintenance.

nCutter blade scabbard

Carefully inspect all components for damage.

WARNING!

Do not make unauthorized modifica- tions or alterations to your articulated hedge trimmer or its components.

IMPORTANT!

The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal operation.

Product Description

	Spark	Air Filter
		Assembly	Hedge Trimmer Cutter
	Plug
			Assembly
Stop Switch			Cutter
			Assembly
			Adjustment
			Lever			Cutter Blade
						Scabbard
		Fuel Tank
Throttle	Fuel Tank Guard				Outer
Trigger	Powerhead Assembly
					Tube
				Handle
	Handle
	Grip		Latch Lock				Hedge Trimmer
					Cutter Guard
							Cutter Assembly
Recoil
Starter
	Fuel Tank		Latch				Cutter Bar and
			Release	Gearcase			Cutter Blades
Figure 3	Guard

Specifications

Model Name		AHS2510
Engine Model		SF2510E
Engine Type	4-cycle, vertical cylinder, air cooled
Dry Weight		6.2 kg/13.6 lbs.
Bore x Stroke		34 x 27 mm/1.34 X1.06”
Displacement		24.5cc/1.5 cu. in.
Engine Speed at Maximum Power Output		............7,500 rpm (min-1)
Maximum Power Output		1.1 hp/0.8 kW
Engine Speed at Idling		3,000 rpm (min-1)
Maximum Engine Speed		10,500 rpm (min-1)
Fuel/Oil Ratio	50:1 with Premium 2-cycle
		air cooled mixing oil
Fuel Tank Capacity		590 ml/20 oz.
Carburetor	Walbro WYL diaphragm type

Ignition System, Fully electronic, program controlled

Spark Plug	NGK CMR5H
Air Filter	Non-reversible, heavy duty,
	two-stage, filter element
Starting Method	Recoil Starter
Stopping Method	Slide Switch
Cooling System	Forced Air
Transmission Type	Automatic, centrifugal clutch
	with bevel gear
Blade Length	567 mm/22.3 in.
Cutter Drive	Spur Gear
Gear Lubricant	Lithium Based Grease

Standard Equipment: Tool kit containing a spark plug wrench, 4mm hex wrench, and 8 x 10 mm spanner

Optional Equipment: Harness and bracket, front handle

Specifications are subject to change without notice.