How to Connect the MC352

Figure 7

1.Connect the MC352 power cord to a live AC outlet.

2.Connect a power control cable from the control center Power Control Out to the MC352 Power Control In.

3.Prepare the loudspeaker hookup cables as follows: A. Carefully remove sufficient insulation from the

loudspeaker cable ends to just fit within the bind- ing post with no exposed

wire accessible. Refer to

figure 1. B. If the cable is stranded,

carefully twist the strands together as tightly as pos- sible. Refer to figures 2 & 3.

Note: If desired, the twisted cable section can be tinned with a solder iron to keep the strands together and/or attach appropriate connector ends.

C. Insert the bare section of the cable end or connec- tor into the access hole, and tighten the terminal nut clockwise until the cable is firmly clamped into the terminal so the wires cannot slip out. Re- fer to figure 4.

D. Insert the bare section of the cable end or connec- tor into the access hole, and tighten the terminal nut clockwise until the cable is firmly clamped

To AC Outlet

Right Loudspeaker 4ohm

into the terminal. Refer to figures 5 & 6.

Note: The bare sections of the cable ends or the non insulated part of the connectors must not be exposed on either side of the terminal access hole.

E. Repeats Steps A through D for each speaker cable used with the amplifier.

4.Connect the loudspeaker cables to the appropriate termi- nals for your loudspeakers, being careful to observe the correct polarities. Output impedance connections of 2

ohms, 4 ohms and 8 ohms are provided. If the impedance of your loudspeakers is rated at other than the listed imped- ance connections, use the nearest lower connection.

5. Install the plastic protective loudspeaker terminal covers that were supplied with your amplifier. Refer to figure 7.

6.Connect a cable from the balanced outputs of a control center to the MC352 balanced Input connectors for both audio channels and power control.

Note: An optional hookup is to use unbalanced cables from a McIntosh Control Center to Unbalanced Inputs of the MC352.

McIntosh C42 Audio Control Center

Left Loudspeaker 4ohm

MC352 specifications

The McIntosh MC352 is a powerful and revered stereo power amplifier that has garnered admiration among audiophiles and music enthusiasts. Renowned for its sheer performance and build quality, the MC352 is part of McIntosh's legacy of producing high-fidelity audio equipment.

At its core, the MC352 boasts a robust output of 350 watts per channel into 2, 4, or 8-ohm loads, making it capable of driving a wide range of speakers with ease. This power allows for dynamic musical reproduction while maintaining clarity and precision, ensuring that the rich details of every note are faithfully delivered. The amplifier is engineered with a dual mono design, allowing each channel to operate independently. This not only enhances stereo separation but also minimizes crosstalk between channels, resulting in a cleaner signal path.

One of the standout features of the MC352 is its patented Power Guard technology. This innovative system continuously monitors the audio signal and adjusts the power output to prevent distortion and clipping. This is especially beneficial for those who appreciate high-volume listening, as Power Guard ensures that the amplifier remains within safe operating limits while delivering a clean and undistorted sound.

Another key technology integrated into the MC352 is the Sentry Monitor. This feature protects the amplifier from damage due to short circuits or overheating by automatically disengaging the output transistors if it detects abnormal conditions. The Sentry Monitor allows for continuous operation without worry, providing peace of mind that the amplifier will perform reliably for years to come.

The MC352 also features a high-quality output transformer that optimizes impedance matching for maximum power transfer. This transformer design contributes significantly to the amplifier's overall sound profile, aiding in the reproduction of low-frequency response while ensuring a smooth presentation of higher frequencies.

Aesthetically, the McIntosh MC352 is a sight to behold, featuring the iconic black glass front panel coupled with the signature McIntosh blue watt meters. These meters not only add a distinctive look but also provide real-time feedback on power output, allowing users to monitor their audio levels effortlessly.

In summary, the McIntosh MC352 combines raw power, advanced technology, and classic aesthetics, making it a standout choice for anyone seeking a premium audio experience. Its reliable performance, combined with thoughtful features, ensures that it remains a respected choice in the world of high-fidelity audio.