How to Connect the MC206 Stereo Amplifier

How to Connect the MC206 for Six Channels

Caution: The supplied AC Power Cord should not be connected to the Rear Panel of the MC206 Amplifier until after the Loudspeaker Connections have been made and the supplied protective Terminal Connection Covers have been installed. Failure to observe this could result in Electric Shock.

1.Connect a power control cable from the McIntosh A/V Control Center Power Control Out to the McIntosh Surround Expander Power Control In.

2.Connect a power control cable from the McIntosh Sur- round Expander Power Control Out to the MC206

POWER CONTROL IN.

3.Connect cables from the Audio Outputs of a McIntosh A/V Control Center and Surround Expander to the MC206 INPUTS, making sure to match up the channel identifications between both units.

4.Prepare the Loudspeaker Hookup Cables that attach to the MC206 Power Amplifier by choosing one of the methods below:

Bare wire cable ends:

Carefully remove sufficient insulation from the cable

ends, refer to

figures 1, 2 & 3. If the cable is stranded,

carefully twist the

strands together as tightly as possible.

Note: If desired, the twisted ends can be tinned with solder to keep the strands together, or attach spade lug and/or banana connector.

Spade lug or prepared wire connection:

Insert the spade lug connector or prepared section of the cable end into the terminal side access hole, and tighten the terminal cap until the cable is firmly

clamped into the terminal so the wires cannot slip out. Refer to

figures 4, 5 & 6.

Banana plug connection:

Insert the banana plug into the hole at the top of the terminal. Tighten the top portion of the terminal post and the set screw to secure the banana plug in place.

Note: The use of Banana Plugs is for use in the United States and Canada only.

5.Connect the Loudspeaker Hookup Cables from the MC206 OUTPUT Terminals to the loudspeakers, being careful to observe the correct polarities and channel designation.

WARNING: Loudspeaker terminals are hazardous live and present a risk of electric shock. For additional instruction on making Loudspeaker Connections contact your McIntosh Dealer or McIntosh Technical Support.

6.Attach each of the three sup-

	plied Terminal Connection
	Covers with the four Pan Head
	Mounting Screws (6-32 x 5/16
	inch) to the Rear Panel of the
	MC206 Amplifier. Refer to fig-	Figure 7
	ures 7 and 8.	Figure 7
	ures 7 and 8.

Note: There are four openings on the bottom edge of the cover to allow the Loudspeaker Cables to exit the MC206.

7.Connect the MC206 Power Cord to an active AC out- let.

Figure 8

Terminal	Cable
Connection Cover	Opening

MC206 specifications

The McIntosh MC206 is a powerful and versatile amplifier that embodies the high-performance audio standards set by the McIntosh brand. Known for its distinctive design and exceptional sound quality, the MC206 is a six-channel amplifier that delivers 200 watts per channel, making it a perfect choice for home theater enthusiasts and audiophiles alike. With its robust power output, it can easily drive a wide range of speakers, ensuring that every note and detail in your audio experience is presented with clarity and precision.

One of the standout features of the MC206 is its use of McIntosh’s patented power management technologies. The amplifier incorporates the renowned McIntosh Autoformers, which allow the MC206 to deliver its full power into a wide range of speaker impedances. This means that whether you have 2, 4, or 8-ohm speakers, the MC206 will provide consistent performance without compromising sound quality or power efficiency. This feature is particularly beneficial in ensuring that even less efficient speakers deliver excellent performance, enhancing the overall audio experience.

In terms of build quality, the MC206 boasts a rugged chassis that not only provides durability but also contributes to its aesthetic appeal. The signature McIntosh glass front panel, complete with illuminated logo and power meters, ensures that the MC206 makes a statement in any AV setup. The amplifier is also designed for easy integration into custom installations, featuring XLR and RCA inputs, as well as trigger and control connections for seamless operation with other components.

The MC206 employs advanced thermal management systems, including a large heat sink and efficient cooling design, which helps maintain optimal operating temperatures even during extended listening sessions. This ensures long-term reliability and longevity, which is a hallmark of the McIntosh brand. Additionally, the amplifier has been engineered to minimize distortion, allowing for a clean power output that preserves the integrity of the audio signal.

In summary, the McIntosh MC206 is a feature-rich six-channel amplifier that combines aesthetic elegance with cutting-edge technology. Its powerful output, compatibility with various speaker types, and exceptional build quality make it an ideal choice for those seeking a top-tier audio experience. Whether used for music listening or home theater applications, the MC206 is designed to deliver superior sound performance that McIntosh enthusiasts have come to expect.