Schneider Electric ION7550, ION7650 manual Installation Considerations, FCC Notice

Page 3

PowerLogic ION7550 / ION7650 Installation Guide

Danger

This symbol indicates the presence of dangerous voltage within and outside the product enclosure that may constitute a risk of electric shock, serious injury or death to persons if proper precautions are not followed.

Caution

This symbol alerts the user to the presence of hazards that may cause minor or moderate injury to persons, damage to property or damage to the device itself, if proper precautions are not followed.

Note

This symbol directs the user’s attention to important installation, operating and maintenance instructions.

Installation Considerations

Installation and maintenance of the PowerLogic ION7550 / ION7650 meter should only be performed by qualified, competent personnel that have appropriate training and experience with high voltage and current devices. The meter must be installed in accordance with all local and national electrical codes.

DANGER

Failure to observe the following instructions may result in severe injury or death.

‹During normal operation of the ION7550 / ION7650 meter, hazardous voltages are present on its termi- nal strips, and throughout the connected potential transformer (PT), current transformer (CT), digital (sta- tus) input, control power and external I/O circuits. PT and CT secondary circuits are capable of generating lethal voltages and currents with their primary circuit energized. Follow standard safety precautions while performing any installation or service work (i.e. removing PT fuses, shorting CT secondaries, etc.).

‹The terminal strips on the meter base should not be user-accessible after installation.

‹Do not use digital output devices for primary protection functions. These include applications where the devices perform energy limiting functions or provide protection of people from injury. Do not use the ION7550 / ION7650 in situations where failure of the devices can cause injury or death, or cause suffi- cient energy to be released that can start a fire. The meter can be used for secondary protection functions.

‹Do not HIPOT/Dielectric test the digital (status) inputs, digital outputs, or communications terminals. Refer to the label on the ION7550 / ION7650 meter for the maximum voltage level the device can withstand.

CAUTION

Observe the following instructions, or permanent damage to the meter may occur.

‹The ION7550 / ION7650 meter offers a range of hardware options that affect input ratings. The ION7550 / ION7650 meter’s serial number label lists all equipped options. Applying current levels incom- patible with the current inputs will permanently damage the meter. This document provides installation instructions applicable to each hardware option.

‹The ION7550 / ION7650 meter’s chassis ground must be properly connected to the switchgear earth ground for the noise and surge protection circuitry to function correctly. Failure to do so will void the warranty.

‹Terminal screw torque: Barrier-type (current, voltage, and relay terminal screws: 1.35 Nm (1.00 ft-lbf) max. Captured-wire type (digital inputs/outputs, communications, power supply: 0.90 Nm (0.66 ft.lbf) max.

FCC Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

© 2007 Schneider Electric. All rights reserved.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Energy & Power Quality Meter PowerLogic ION7550 / ION7650Page FCC Notice Installation ConsiderationsCSA C22.2 No.1010-1 Network Compatibility Notice for the Internal ModemStandards Compliance CSA Certified to canTran transducer Model PowerLogic ION7550 / ION7650 ModelsAvailable Options Integrated Display ModelFront Panel Button Functions Before You BeginMeter Overview Recommended ToolsBasic Model Side View Unit DimensionsMount the Meter Wire the Ground TerminalEnvironmental Specifications Meter Battery ConsiderationsContacts Common, Y NO, Z NC Wire the Digital I/O and Analog I/OWire Use wiring that is appropriate for the application Type Form C R1, R2, R3Digital Inputs S1 S8 Digital Inputs Meter Ordering Option DI1 DI8VDC max Type Captured wire connector Wire To 0.1 mm2 16 to 28 AWG Analog Inputs Meter Ordering Option AI1 to AI4Analog Outputs Meter Ordering Option AO1 to AO4 Current Inputs Class 2 Current Inputs 1A Option Wire the Voltage and Current InputsVoltage Inputs Current Inputs Class 20 Current Inputs 5A OptionL-N / 600 V L-L max. Volts Mode = 4W-Wye Wire Wye, 3-Element, Direct Connection DiagramWire Wye, 3-Element, 3 PTs Connection Diagram Wire Wye, 2½-Element, 2 PTs ConnectionL-L max. Volts Mode = Delta Wire Solid-Grounded Wye, 3-Element, Direct ConnectionWire Delta, 2½-Element, Direct Connection Wire Delta, 2-Element 2 PTs & 2 CTsWire Delta, 2½-Element, 2 PTs & 3 CTs Single Phase Connection DiagramUsing Potential Transformers Infrared Connections COM4 Wire the CommunicationsRS-232 Connections COM1 RS-485 Connections COM1 and COM2100BASE-FX Fiber Ethernet TCP/IP Service PortsEthernet Connections if equipped Internal Modem Connection COM3 if equippedWire the Power Supply Power Up the MeterSet Up the Meter Using the Front Panel Selecting the Front Panel Language PasswordFront Panel Setup Menu Settings Basic SetupMenu COM2 Menu Setting Description Range Values DefaultSetup Color Function Verify Meter OperationLEDs on the back of the meter flash during communications LEDLEDs on the front panel indicate the following Phasor DiagramsDelta phasors for Unity Power Factor resistive load Applicable Volts Mode = DeltaApplicable Volts Mode = 4W-WYE and 3W-WYE WYE ABC RotationWYE ACB Rotation Element 3Wire Delta ACB Rotation Element 3Wire Delta ABC RotationDisplay Screens View Meter DataPowerLogic ION7550 / ION7650 Schneider ElectricUSA

ION7550, ION7650 specifications

Schneider Electric has long been a leader in energy management and automation solutions, and its ION7650 and ION7550 power quality analyzers represent the pinnacle of their technology in electrical measurement. Both devices are designed to help businesses optimize energy usage, improve power quality, and enhance operational efficiency.

The ION7650 is a high-performance, multi-function power quality analyzer that supports advanced applications for medium to high voltage systems. With its extensive communication capabilities and customizable configuration, it meets the needs of the most demanding power quality monitoring projects. It is equipped with a 7-inch color touchscreen interface, making it user-friendly and intuitive for operators. The ION7650 provides comprehensive analysis of power quality disturbances, such as harmonics, voltage sags, and swells, allowing for precise diagnostics of electrical issues.

On the other hand, the ION7550 focuses on providing an in-depth look at power quality for low to medium voltage systems. It shares many similarities with the ION7650 but is tailored to environments where space and installation flexibility are at a premium. With its compact design, the ION7550 can be easily integrated into existing electrical systems. Key features include real-time monitoring of voltage and current, energy consumption tracking, and the ability to log historical data for analysis.

Both the ION7650 and ION7550 are equipped with Schneider Electric's proprietary ION technology, which allows for accurate measurement of power quality metrics and energy consumption. This technology supports a wide range of protocols including Modbus, DNP3, and IEC 61850 for seamless integration into automation systems and smart grids.

One of the standout characteristics of both analyzers is their ability to provide actionable insights through advanced data visualization tools. Users can access real-time data and customizable dashboards, enabling proactive decision-making regarding energy management. Their compatibility with the EcoStruxure Platform facilitates remote monitoring and management, ensuring that energy usage is tracked and optimized across multiple sites.

In summary, the Schneider Electric ION7650 and ION7550 power quality analyzers are powerful tools designed to enhance energy management and improve operational efficiency. With their advanced technologies, user-friendly interfaces, and extensive connectivity options, they provide businesses with the insights needed to navigate the complexities of modern energy consumption and power quality issues. These devices not only promote energy savings but also support sustainability goals across various industries.
Top Page Image Contents