Technics SC-EH590 ªA Recording the radio, ªB Tape-to-tape recording, Using the timers, Play timer

A

3 2

		∫
2	¥REC
		TUNED ÎNR
	PAUSE	REC
		2

MHz

3

B

1 2

operations	1	1	∫
Recording			DECK 1/2
		2

∫

2	TAPE EDIT
		1 2
		ÎNR

REC

RQT6866

ªA Recording the radio

Preparation: Do the preparatory steps (➡ page 28).

1 Tune to the required station.

(➡ page 17 or 18)

2 Press [¥ REC PAUSE].

The deck goes into the recording standby mode and the play indicator “"” or “!” starts flashing.

3 Press ["] (reverse side) or [!] (forward side) to start

recording.

To stop recording

Press [∫].

To temporarily stop recording

Press [¥ REC PAUSE].

The deck goes into recording standby mode.

To resume recording press ["] or [!] with the flashing indicator.

ªB Tape-to-tape recording

Preparation:

≥Do the preparatory steps 1 and 3 (➡ page 28). ≥Insert the tape to be recorded in deck 1.

1 Set the tape direction on both decks.

1Press [DECK 1/2] to select “DECK 2”.

2 First press ["] or [!], and then [∫].

Repeat steps 1 and 2 for deck 1.

2 Press [TAPE EDIT] to start recording.

The indicator “"” or “!” shows deck 2 direction.

If either deck 1 or deck 2 stops, the other deck also stops.

To stop recording

Press [∫].

Both decks will stop.

To enjoy another source while recording

Start playing the other sound source.

You can change the volume level and tone quality without affecting the recording.

Note

The recording level and the noise reduction effect of the original (playback) tape will be recorded on the new tape.

3 1 2

FPLAY/FREC

1 1 CLOCK/ TIMER

2 SET

FPLAY

2 1 TUNING

2SET

a

FPLAY

b

FPLAY

c

FPLAY

	MHz
CH	FPLAY

d

FPLAY

FPLAY

3 Í/I

FPLAY

Using the timers

The play timer

This timer starts play of the selected source at the selected time.

The example shows settings for preset radio channel 1 to play between 6:30 and 7:40 at j48 dB.

Preparation: Turn the unit on, set the time (➡ page 12), preset radio stations if you want the timer to start playing the radio (➡ page 18).

1 1Press [CLOCK/TIMER] to select “FPLAY”.

Each time you press the button:

CLOCK>FPLAY>FREC>Original display

^----------------------------------------------------------- }

2Press [SET] within 3 seconds.

2 Follow these steps to set items a to d.

1Press [TUNING (X or W)] to select the condi- tion required and

2Press [SET].

aStart time

bFinish time

cSource

TUNER()CD()TAPE

^------------------------------	J
Insert a CD or tape if you select these sources.
If you select TUNER
Select a preset channel.
d Volume
The play timer is now on standby. The display shows each condition		functions
record) timer is on.
again then restores the original display.

3 Press [Í/I] to turn the unit off.

FPLAY/FREC indicator remains illuminated to show the play (or

To cancel the timer		convenient
The timer starts at the set time with the volume increasing gradually to the
set level.
Press [FPLAY/FREC] so “FPLAY” goes out.		and
Each time you press the button:
FPLAY>FREC>FPLAY FREC>Light off (OFF)		operations
For your reference:	}
^---------------------------------------------------------------
The play timer will be canceled, but the settings stay in the
memory.		Timer
When you insert cassettes in decks 1 and 2, deck 1 has priority.

RQT6866

31