Inverter Protection Features

PMP1200 Models

•Avoid placing the inverter on or near heating vents, radiators or other sources of heat. Do not place or use the inverter in direct sunlight. Ideal air temperatures should be between 50° and 80° F.

•In order to properly disperse the heat generated from the inverter while it is operating, keep the inverter well ventilated. Keep the area surrounding the inverter clear while in use.

•Do not use the inverter near flammable materials. Do not place the inverter in areas such as battery compartments where fumes or gases may accumulate.

•Short Circuit Protection. The inverter will automatically shut down until short is removed.

•Low Voltage Alarm. An alarm will sound when the voltage from the battery discharges to 10.5 +/- 0.5 volts DC. This is an indication that the battery needs to be recharged.

•Over Voltage Protection. The RED LED Indicator Light will illuminate and the inverter will automatically turn itself off when the input exceeds 16.5 +/- 1 volt DC.

•Under Voltage Protection. The RED LED Indicator Light will illuminate and the inverter will automatically turn itself off when the input is less than 10.0 +/- 0.5 volts DC.

•Overload Protection. The RED LED Indicator Light will illuminate and the inverter will automatically turn itself off when the continuous draw of the equipment being operated exceeds 1200 watts or the surge draw of the equipment exceeds 2400 watts.

•Thermal Protection. The RED LED Indicator Light will illuminate and the inverter will automatically turn itself off when the circuit temperature exceeds 150° F.

Notes

•The inverter is equipped with a cooling fan, which is designed to turn on when the unit gets hot. Automatic shut down of the unit caused by high circuit temperatures will occur when the cooling fan is unable to maintain a cool enough temperature for safe operation.

•In the event of automatic shut down or a continuous audible alarm, turn the inverter power switch to the OFF(O) position until the source of the problem has been determined and resolved.

Owner’s Manual

Television and Audio Suggestions

Although all COLEMAN® inverters are shielded and filtered to minimize signal interference, some interference with your television picture may be unavoidable, especially with weak signals. However, here are some suggestions that may improve reception:

•Make sure the television antenna produces a clear signal under normal operating conditions (at home plugged into a standard 120 volt AC outlet). Also, ensure that the antenna cable is properly shielded and/or good quality.

•Change the positions of the inverter, antenna cables and the television power cord.

•Isolate the television, its power cord and antenna cables from the 12-volt power source by running an extension cord from the inverter to the television set.

•Coil the television power cord and the input cables running from the 12-volt power source to the inverter.

•Attach an AC interference filter or similar product between the inverter and the television power cord. These filters are available at most electronic supply stores, including Radio Shack.

Note: Inexpensive sound systems may emit a “buzzing” sound when operated with an inverter. This is due to the inadequate filters in the sound system. There is no solution to this problem other than purchasing a sound system with a higher quality power supply.

PMP1200 specifications

The Team Products PMP1200 is a cutting-edge portable multimedia player that has gained significant attention for its versatility and impressive performance. Designed for both personal entertainment and professional use, the PMP1200 incorporates advanced technologies and features that cater to a wide range of media playback needs.

One of the standout characteristics of the PMP1200 is its vibrant 12-inch display, which delivers stunning visuals for movies, videos, and presentations. The high-resolution screen ensures clarity and brightness, making it ideal for viewing in various lighting conditions. Whether users are watching their favorite films or projecting slideshows during meetings, the PMP1200 promises an immersive experience.

Additionally, the PMP1200 is equipped with a powerful multimedia engine that supports various media formats, including MP4, AVI, and MKV, ensuring compatibility with almost any video or audio file. This flexibility allows users to enjoy their content without the fuss of conversion, making it a convenient choice for both casual users and professionals in fields like education and business.

The device features built-in Wi-Fi connectivity, enabling seamless access to streaming services such as Netflix, YouTube, and Spotify. This capability not only broadens entertainment options but also allows users to access educational content and professional resources online. Moreover, the PMP1200 is compatible with Bluetooth technology, facilitating easy pairing with headphones, speakers, or other devices for an enhanced auditory experience.

In terms of storage, the PMP1200 includes a generous amount of internal memory, with the option to expand it further via an SD card slot. This feature permits users to store numerous files without worrying about running out of space, which is particularly beneficial for those who use the device for work-related purposes.

The PMP1200 is designed with user convenience in mind. It boasts an intuitive interface that allows for easy navigation through menus, playlists, and settings. Furthermore, the device is lightweight and portable, making it perfect for travel or on-the-go media consumption.

In summary, the Team Products PMP1200 is a versatile multimedia player that combines high-quality display options, broad format support, Wi-Fi capability, and user-friendly features. Its advanced technologies and characteristics make it a great choice for anyone looking to enhance their multimedia experience, whether at home, in the office, or on the road.