How to Connect Loudspeakers

Caution: The supplied AC Power Cord should not be connected to the Rear Panel of the MA6300 Amplifier until after the Loudspeaker Connec- tions have been made. Failure to observe this could result in Electric Shock. For additional instruction on making Loudspeaker Connec- tions contact your McIntosh Dealer or McIn- tosh Technical Support.

When connecting Loudspeakers to the MA6300 it is very important to use cables of adequate size, so there is little to no power loss in the cables. The size is specified in Gauge Numbers or AWG (American Wire Gauge). The smaller the Gauge number, the larger the wire size:

If your loudspeaker cables are 50 feet (38.1m) or less, use at least 14 Gauge.

If your loudspeaker cables are 100 feet (76.2m) or less, use at least 12 Gauge.

1.Prepare the Loudspeaker Hookup Cables that attach to the Amplifier by choosing one of the methods below:

Bare wire cable ends:

Carefully remove sufficient insulation from the cable ends, refer to figures 1, 2 & 3. If the cable is stranded,

carefully
twist the
strands
together as	Figure 1	Figure 2	Figure 3
tightly as
possible.

Note: If desired, the twisted ends can be tinned with solder to keep the strands together, or attach spade lug and/or banana connector.

Spade lug or prepared wire connection:

Insert the spade lug connector or prepared section of the cable end into the terminal side access hole, and tighten the terminal cap until the cable is firmly clamped into the terminal so the wires cannot slip out. Refer to figures 4, 5 & 6.

Banana plug connection:

Insert the banana plug into the hole at the top of the terminal. Refer to figure 7.

Note: Banana Plugs are for use in the United States and Canada only.

2. Connect the loudspeaker hookup cables to the output terminals

that match the impedance of your loudspeakers, being careful to observe the correct polarities.

3. Connect the MA6300 Power Cord to a live AC outlet.

MA6300 specifications

The McIntosh MA6300 is a high-performance integrated amplifier that embodies the company’s commitment to exceptional audio quality and innovative technology. Known for its classic design and robust build, the MA6300 has garnered a reputation among audiophiles for delivering outstanding sound reproduction while providing a multitude of connectivity options.

One of the prominent features of the MA6300 is its 100 watts per channel output, which allows it to drive a wide range of speakers with ease. This power ensures a dynamic listening experience, whether you're enjoying delicate jazz tunes or powerful orchestral compositions. The amplifier's high-current output is designed to maintain performance even with challenging speaker loads, making it versatile for various audio systems.

The MA6300 incorporates the renowned McIntosh Autoformer technology, which provides the same power output to 2, 4, or 8-ohm speakers. This innovative feature eliminates the need to match speakers within specific impedance ratings, ensuring flexibility while optimizing performance. Additionally, the amplifier employs a classic McIntosh design with illuminated output meters that not only enhance its aesthetic appeal but also allow users to monitor power levels while listening.

Another standout technology is the MA6300's advanced digital signal processing capabilities. With a range of inputs including analog, digital, and USB ports, the amplifier accommodates modern sources, from turntables to computers. The high-quality DAC (Digital-to-Analog Converter) integrated into the system ensures that digital audio is converted with precision, preserving the integrity of the original recording.

The MA6300 also features a built-in phono stage for vinyl enthusiasts, allowing for direct connections with turntables. This adds to its versatility and caters to purists who value analog sound reproduction. Users will appreciate the customizable sound options available through tone controls, enabling them to fine-tune their listening experience to suit personal preferences.

In summary, the McIntosh MA6300 is not just an integrated amplifier; it is a statement of audio engineering excellence. Its power, flexibility, and attention to detail make it a cornerstone for any high-fidelity audio system, offering users a remarkable listening experience that honors the music in every note. Whether you are an avid audiophile or simply seeking to elevate your home audio setup, the MA6300 provides the performance and quality expected from the McIntosh legacy.