Important Safety Instructions | Tanaka AST-7000 guide

AST-7000	Owner’s Manual
	Owner’s Manual

I. IMPORTANT SAFETY INSTRUCTIONS

1.Do not depress the "Start Button" while recharging the battery. This will result in damage to the battery charger. The battery charger must be disconnected from the unit before starting.

2.Do not attempt to charge the AST-7000 battery with other than the Tanaka charger. Do not attempt to charge other batteries with the Tanaka charger. The charger and the AST-7000 battery have specific voltage requirements and are designed only to work together.

3.The charger is designed for standard household electrical power (AC 120V). Do not attempt to use any other voltage.

4.Do not expose the charger to rain or snow.

5.Do not store the AST-7000 or charger where temperatures will meet or exceed 122° F(62°C).

6.Do not short circuit or in any way alter the charging system as this will result in damage to the battery and/or the unit.

7.Do not store or operate near open flames as this may cause the battery to burst and/or release toxic material.

II.ASSEMBLING PROCEDURES

1.Drive shaft to engine (Fig. 1)

1.Loosen shaft tightening bolt (1) and location bolt (2).

2.Insert the throttle wire (4) through the hole in the bottom of the shaft grip and connect the electrical coupling (3).

3.Push the drive shaft into the hole in the clutch case until the shaft grip is against the clutch case.

NOTE: If the shaft does not slide so that the grip is against the clutch case, turn the drive shaft slightly in order to match the splined end of the drive shaft with the splined clutch drum inside of the clutch case.

4.Tighten the location bolt (2) and the shaft tightening bolt (1 ).

2.Throttle control (Fig. 2)

1.Remove throttle lever screw (1) and slide the throttle lever assembly away from the shaft grip temporarily. Connect the throttle wire in the hole of the throttle lever.

2.Locate throttle lever in its original position by squeezing the trigger, then slide the throttle lever assembly back against the shaft grip then retighten the throttle lever screw (1 ).

3.Installation of handle (Fig. 3)

1.Secure the handle to the shaft as shown in Figure 3. Adjust the handle according to your height, etc.

Note: Keep both triangular marks of handle and handle bracket on the same side. Tighten the mark side (Hex. bolt) first, then, handle knob.

www.tanakapowerequipment.com

custsvc@tanaka-ism.com

AST-7000 specifications

The Tanaka AST-7000 is a remarkable piece of technology that has gained traction in various industrial applications due to its advanced features and superior performance. Designed for efficiency and reliability, the AST-7000 is equipped with cutting-edge technologies that enhance its operational capabilities.

One of the main features of the Tanaka AST-7000 is its powerful processing unit, which ensures quick data processing and response times. This feature is particularly beneficial for industries requiring real-time decision-making. The AST-7000 operates on a robust software platform that simplifies user interaction while maintaining high productivity levels.

In terms of connectivity, the AST-7000 supports multiple communication protocols, allowing it to easily integrate with existing systems. Its versatility makes it an excellent choice for industries that demand seamless collaboration between different machines and equipment. The device is equipped with Ethernet, USB, and Bluetooth options, ensuring a wide range of connectivity possibilities.

Another standout characteristic of the Tanaka AST-7000 is its superior durability. Constructed from high-grade materials, the unit is designed to withstand harsh environments, making it suitable for both indoor and outdoor applications. This durability is coupled with a compact design that facilitates easy installation and maintenance, thus reducing downtime.

Power efficiency is a core focus in the design of the AST-7000. The device incorporates energy-efficient technologies that result in lower operational costs, making it an environmentally friendly option for businesses. Its intelligent power management system optimizes energy consumption based on usage patterns, ensuring that the device operates within the most efficient parameters.

Additionally, the Tanaka AST-7000 boasts an intuitive user interface, making it user-friendly even for those with minimal technical knowledge. This characteristic is crucial for reducing training times and enabling quick adaptation within operational settings.

Safety features are also a priority in the design of the AST-7000. It includes multiple safety mechanisms to prevent malfunctions and accidents, ensuring operator safety and compliance with industry regulations.

In conclusion, the Tanaka AST-7000 is an advanced device characterized by its powerful processing capabilities, versatile connectivity options, durability, energy efficiency, and user-friendly interface. Its innovative technologies make it an ideal solution for a variety of industrial applications, providing businesses with a reliable tool to enhance productivity and efficiency.