Tanaka ECS-3351, ECS-3301 manual Air filter Fig, Cleaning the air filter, Spark plug Fig

Page 14

ECS-3301/3351

Owner’s Manual

 

 

 

Air filter (Fig. 3-2)

The air filter must be cleaned from dust and dirt in order to avoid:

•Carburetor malfunctions.

•Starting problems.

•Engine power reduction.

•Unnecessary wear on the engine parts.

•Abnormal fuel consumption.

Clean the air filter daily or more often if working in exceptionally dusty areas.

Cleaning the air filter

Remove the air filter cover and the filter (1). Rinse it in warm soap suds. Check that the filter is dry before reassembly. An air filter that has been used for some time cannot be cleaned completely. Therefore, it must regularly be replaced with a new one. A damaged filter must always be replaced.

Spark plug (Fig. 3-3)

The spark plug condition is influenced by:

•An incorrect carburetor setting.

•Wrong fuel mixture (too much oil in the gasoline)

•A dirty air filter.

•Hard running conditions (such as cold weather).

These factors cause deposits on the spark plug electrodes, which may result in malfunction and starting difficulties. If the engine is low on power, difficult to start or runs poorly at idling speed, always check the spark plug first. If the spark plug is dirty, clean it and check the electrode gap. Readjust if necessary. The correct gap is 0.6mm (.024”). The spark plug should be replaced after about 100 operation hours or earlier if the electrodes are badly eroded.

NOTE!

In some areas, local law requires using a resistor spark plug to suppress ignition signals. If this machine was originally equipped with resistor spark plug, use same type of spark plug for replacement.

www.tanakapowerequipment.com

13

custsvc@tanaka-ism.com

Page 13 Page 15
Image 14
Page 13 Page 15
Contents ECS-3301/3351 Before using this unit ECS-3301/3351 Operator Safety Assembly procedures Proper Tension is Extremely IMPORTANT! -4Fueling Operating procedures Fuel FigFuel Chain OIL -1 B Adjustment of Chain OIL SupplyStarting -2 Chain Catcher Chain brake operation Optional FigStopping Fig ECS-3301/3351 Felling Basic Rules for Felling TreesLimbing Thick LOG, Larger than Guide Bars Length Thick LOG, Larger than Guide BAR LengthCross Cutting LOGS, Pressure on Bottom If the SAW Gets StuckIdle speed adjustment T MaintenanceCarburetor adjustment Fig Spark plug Fig Cleaning the air filterAir filter Fig Side case Fig Oiler port FigGuide bar Fig Fuel filter FigChain Sharpening Weekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceSpecifications U001001 Bar & Chain USA and Bar & Chain Canada Model Number BAR Number LENGTH-TYPE Chain Number

ECS-3301, ECS-3351 specifications

The Tanaka ECS series has made a significant impact in the world of advanced electronic circuit simulators, with models ECS-3301 and ECS-3351 leading the charge in terms of performance and technology. These devices are primarily designed for professionals in the fields of electrical engineering and electronics who require precision, reliability, and ease of use.

The Tanaka ECS-3301 is well-known for its intuitive user interface. It features a high-resolution display that enhances visibility and ease of navigation. With a robust built-in software package, users can access an extensive library of electronic components, allowing for quick setup and simulation without the need for extensive programming knowledge. The ECS-3301 is particularly lauded for its rapid computation speed, which allows for real-time simulations and analysis of complex circuits.

In contrast, the ECS-3351 builds upon the foundation laid by its predecessor, offering even more advanced features and capabilities. It is equipped with an upgraded processing unit that handles larger simulations with increased efficiency. The ECS-3351 is designed with multi-core processing technology, allowing for parallel simulations that drastically reduce turnaround times. This makes it particularly suitable for larger projects or academic purposes where real-time feedback is crucial.

Both models are equipped with various simulation modes, including DC, AC, transient analysis, and higher-level functionality for frequency domain analysis. They also support mixed-mode simulations, allowing engineers to work seamlessly across analog and digital components. This versatility is critical for modern electronic designs that often incorporate elements from both domains.

Another important characteristic of the ECS-3301 and ECS-3351 is the robust data visualization options. Users can generate detailed graphs and reports that illustrate circuit performance, enabling comprehensive analysis and documentation. Such features enhance the educational value of these simulators, making them popular tools in academic institutions and research laboratories.

The Tanaka ECS series recognizes the growing importance of connectivity in modern electronics. Both models offer extensive compatibility with various external devices and software, making it easy to integrate into existing workflows. With USB and network connectivity options, users can share data and simulation results effortlessly.

In conclusion, the Tanaka ECS-3301 and ECS-3351 are remarkable tools that streamline the design and analysis of electronic circuits. Combining user-friendly interfaces, advanced processing capabilities, and robust simulation features, these models stand out as essential instruments for engineers and educators alike. With their ongoing development, Tanaka continues to shape the future of electronic circuit simulation technology.
Top Page Image Contents